sat nav FORD FLEX 2013 1.G Quick Reference Guide

3 information
disPlays Provides information
about various systems
on your vehicle. Use
the left-hand, 5-way
controls located on the
steering wheel to choose
and confirm settings
and messages. Refer
to the Information
Displays chapter of
your Owner’s Manual
for more information.
4 servi Ce engine
soon light Illuminates briefly
when the ignition is
turned on. If it remains on
or is blinking after
the engine is started,
the on-board diagnostics
system (OBD-II) has
detected a malfunction.
Drive in a moderate
fashion and contact
your authorized dealer
as soon as possible.
5 infotainment
disPlay*
Displays information about
Entertainment, Phone, Navigation and Climate.
Use the right hand 5-way
controls located on your
steering wheel to scroll
through, highlight and
make minor adjustments
within a selected menu.
Refer to the MyFord
Touch chapter in your
Owner’s Manual for
more information.
6 s
teering Wheel
a udio Controls Press VOL +/- to
increase/decrease
volume levels. Press
SEEK
to access
the next/previous
radio station preset,
CD track or preset
satellite radio channel*.

: Press to access
voice recognition.

: Press to
access SYNC®
phone features.
7 Push button
start* Allows you to start your
vehicle by pressing the ENGINE START/STOP
button while fully pressing
down on the brake pedal.
Press the button again to
turn the engine off.
Note: Your intelligent
access key* must be
inside the vehicle for
the ignition to start.
8 hazard C
ontrol
9 seleCtshift
a utomati C™
t ransmission
Gives you the ability to
manually change gears if
you’d like. To use, move
the gearshift lever from D
(Drive) to S (Sport). Then
use the paddle shifters
located on your steering
wheel to make shifts
quickly. Pull the right
paddle (+) to upshift,
pull the left paddle (-)
to downshift. If your
vehicle is equipped with
+/- thumb switch on your
gearshift lever; press (+)
to upshift, press (-)
to downshift.
1 PoWer tilt teles Co Pe
s teering Column*/
adjustable Pedals*
Use your controls to adjust the
steering wheel and pedals to
the desired position.
2 Cruise Control To set your cruise
control speed: 1. Press the
ON control up
and release.
2. Accelerate to the
desired speed.
3. Press the SET control up and
release, then take your foot
off the accelerator.
After your speed has been set you
can press SET +/- to adjust cruise
speed. To disable, press
the OFF control down.
adaPtive C ruise
Control* Allows you to set a ‘gap
distance’ between yourself and
the vehicle in front of you during
highway driving. When your cruise
control is active press GAP up or
down to select the gap distance.
Refer to the Cruise Control
chapter of your Owner’s Manual
for more information. Note:
Driving aids do not replace
the need to watch where the
vehicle is moving and brake where
necessary. Refer to your Owner’s
Manual for safety information,
more detail and limitations.
1256783 4
.
5iF eQui PPed*
9
INsTRUMENT P aNEl
4
FLEX
1090198_13_Flex_QRG_11712.indd 5-61/17/12 3:49 PM