service interval FORD FUSION 2020 Owners Manual

FORD FUSION 2020 Owners Manual FUSION 2020 FORD FORD https://www.carmanualsonline.info/img/11/40666/w960_40666-0.png FORD FUSION 2020 Owners Manual

Page 269 of 497

FORD FUSION 2020  Owners Manual 1. Pull off the road as soon as safely
possible and shift the transmission into
park (P).
2. Leave the engine running until the coolant temperature gauge needle
returns to the normal position.  If the

Page 272 of 497

FORD FUSION 2020  Owners Manual 1. Park your vehicle on a level surface.
2. Look at the brake fluid reservoir to see
where the brake fluid level is relative
to the MIN and the MAX marks on the
reservoir.
Note: If the brake fluid lev

Page 436 of 497

FORD FUSION 2020  Owners Manual GENERAL MAINTENANCE
INFORMATION
Why Maintain Your Vehicle?
Carefully following the maintenance
schedule helps protect against major repair
expenses resulting from neglect or
inadequate maintenance and

Page 437 of 497

FORD FUSION 2020  Owners Manual When the oil change message appears in
the information display, it is time for an oil
change. Make sure you perform the oil
change within two weeks or 500 mi
(800 km) of the message appearing. Make
su

Page 439 of 497

FORD FUSION 2020  Owners Manual Multi-Point Inspection
Suspension components for leaks ordamage
Exhaust system
Steering and linkage
Exterior lamps operation
Tires (including spare) for wear and properpressure2
Fluid levels 1
; fill

Page 441 of 497

FORD FUSION 2020  Owners Manual At Every Oil Change Interval as Indicated by the Information Display
1
Inspect the tires, tire wear and measure the tread depth.
Inspect the wheels and related components for abnormal noise, wear, loo

Page 443 of 497

FORD FUSION 2020  Owners Manual Operating in Dusty or Sandy Conditions (Such as Unpaved or Dusty Roads)
Replace cabin air filter.
Inspect frequently, service
as required
Replace engine air filter.
Inspect the wheels and related comp

Page 486 of 497

FORD FUSION 2020  Owners Manual Blind Spot Information System.............208
Switching the System Off and On..............209
System Errors..................................................... 209
Using the Blind Spot Information S