instrument panel FORD KUGA 2015 2.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine AUTOMATIC CLIMATE CONTROL
AUTO: Press the button to select automatic operation.A
Fan speed: Controls the volume of air circulated in your vehicle.B
On and off button: Press the button to switch the system on and off.C
MAX Defrost: Press the button to distribute outside air through the windshieldair vents.D
MAX A/C: Press the button to distribute maximum air conditioning through theinstrument panel air vents.E
Recirculated air: Press the button to switch between outside air and recirculatedair.F
Windshield: Press the button to distribute air through the windshield air vents.G
Instrument panel: Press the button to distribute air through the instrumentpanel air vents.H
Footwell: Press the button to distribute air through the footwell air vents.I
Air conditioning: Press the button to switch the air conditioning on or off.J
Recommended settings: AUTO, 22ºC
Mono Mode
In this mode, the temperature settings forboth the driver side and passenger side arelinked. If you adjust the setting using therotary control on the driver side, the systemadjusts the temperature to the same settingon the passenger side.
Switching Mono Mode Back On
Press and hold the AUTO button. Thepassenger side temperature is adjusted tothe driver side temperature setting.
8Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3586en enGBR, Edition date: 09/2014, Second Printing

Downloaded from www.Manualslib.com manuals search engine HINTS ON CONTROLLING THE
INTERIOR CLIMATE
Manual Climate Control
Recommended Settings for Cooling
•Adjust the fan speed to the secondspeed setting.
•Adjust the temperature control to themidway point of the cold settings.
•Adjust the air distribution control to theinstrument panel air vents position.
Recommended Settings for Heating
•Adjust the fan speed to the secondspeed setting.
•Adjust the temperature control to themidway point of the hot settings.
•Adjust the air distribution control to thefootwell and windshield air ventsposition.
HEATED WINDOWS AND
MIRRORS
Heated Windshield
Heated Rear Window
Heated Exterior Mirror (If Equipped)
Both mirrors are heated to remove ice, mistand fog when the heated rear window isswitched on.
HEAD RESTRAINTS
Adjusting the Head Restraint
Raising the Head Restraint
Pull the head restraint up.
Tilting the Head Restraint
The front head restraints may have a tiltingfeature for extra comfort. To tilt the headrestraint, do the following:
1.Adjust the seat back to an uprightdriving or riding position.
2.Pivot the head restraint forward towardyour head to the desired position.
After the head restraint reaches theforward-most tilt position, pivot it forwardagain to release it to the rearward, un-tiltedposition.
REAR SEATS
Folding the Seatback
9Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3586en enGBR, Edition date: 09/2014, Second Printing

Downloaded from www.Manualslib.com manuals search engine Inflating the Tire
Protective capA
Pressure relief valveB
HoseC
Orange capD
Bottle holderE
Pressure gaugeF
Power plug with cableG
Compressor switchH
LabelI
Bottle lidJ
Sealant bottleK
1.Open the lid of the kit.
2.Peel off the label I showing themaximum permissible speed of 50 mph(80 km/h) from the casing and attachit to the instrument panel in the driver’sfield of view. Make sure the label doesnot obscure anything important.
3.Take the hose C and the power plugwith cable G out of the kit.
4.Unscrew the orange cap D and thebottle lid J.
5.Screw the sealant bottle K clockwiseinto the bottle holder E fully tight.
6.Remove the valve cap from thedamaged tire.
7.Detach the protective cap A from thehose C and screw the hose C firmly ontothe valve of the damaged tire.
8.Make sure that the compressor switchH is in position 0.
9.Insert the power plug G into the cigarlighter socket or auxiliary power point.
10.Start the engine.
11.Move the compressor switch H toposition 1.
12.Inflate the tire for no longer than 10minutes to an inflation pressure ofminimum 1.8 bar (26 psi) and amaximum of 3.5 bar (51 psi). Move thecompressor switch H to position 0 andcheck the current tire pressure withpressure gauge F.
13.Remove the power plug G from thecigar lighter socket or auxiliary powerpoint.
14.Quickly unscrew the hose C from thetire valve and replace the protectivecap A. Fasten the valve cap again.
15.Leave the sealant bottle K in thebottle holder E.
16.Make sure the kit, the bottle lid andthe orange cap are stored safely, butstill easily accessible in your vehicle.The kit will be required again when youcheck the tire pressure.
17.Immediately drive approximatelytwo miles (three kilometers) so thatthe sealant can seal the damagedarea.
TIRE PRESSURE MONITORING
SYSTEM
13Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3586en enGBR, Edition date: 09/2014, Second Printing

Downloaded from www.Manualslib.com manuals search engine As a driver assistance feature, your vehiclehas a tire pressure monitoring system. Awarning lamp will illuminate when one ormore of the tires are significantlyunder-inflated. If the low tire pressurewarning lamp illuminates, you should stopyour vehicle as soon as it is safe to do so,check the tires and inflate them to thecorrect pressure.
Driving on under-inflated tires can:
•Cause them to overheat.
•Lead to tire failure.
•Reduce fuel efficiency.
•Reduce tire life.
•Affect vehicle handling or stoppingability.
The system is not a substitute for correcttire maintenance.
You must maintain the correct tirepressures, even if low tire pressure has notilluminated the warning lamp.
Understanding the Tire PressureMonitoring System
The system measures the pressure in thefour road tires and sends the tire pressurereadings to your vehicle.
The system detects this lower pressure asbeing significantly below the correctinflation pressure and the warning lampilluminates. You must inflate the tires tothe correct pressure.
If the Warning Lamp is On:
1.Check each tire to verify that none areflat.
2.If one or more tires are flat, repair asnecessary.
3.Check the tire pressures and inflate allthe tires to the correct pressure.
4.Carry out the tire pressure monitoringsystem reset procedure.
Tire Pressure Monitoring SystemReset Procedure
You must carry out the system resetprocedure after each tire replacement oradjustment of the tire pressures.
Carrying Out the System ResetProcedure
1.Check the tire pressures and inflate allthe tires to the correct pressure.
2.Use the information display controls onthe steering wheel or instrument panel.
To reset the tire pressure monitoring system, scroll to:
Description and ActionMessage
Press the OK button.Settings
Press the OK button.Driver assist
Press and hold the OK button until confirmation appears.Alternatively, if your vehicle has a tire pressure monitoringsystem reset button, press and hold the button until confirm-ation appears.
Tire Monitor
14Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3586en enGBR, Edition date: 09/2014, Second Printing