display FORD MUSTANG 1996 4.G User Guide

151 [AS30200(M )05/94]
Using the ªSCROLLº feature
[AS30300(M )05/94]
The scroll feature allows the display to scroll
through titles that are larger than 12 characters.
[AS30400(M )05/94]
Press the ªSCROLLº button to activate the scroll
feature.
[AS30420(M )05/94]
Using the ªAMSº feature
[AS30440(M )03/95]
Pressing the right (
e) side of the ªAMSº
button advances the disc forward one track at a
time.
[AS30445(M )03/95]
Pressing the left (
f) side of the ªAMSº button
brings the disc back to the beginning of the
current track. Pressing and holding the left
(
f) or right (
e) side of the ªAMSº button
will scroll backward or forward respectively
through the tracks.
[AS30460(M )05/94]
Using the display feature
[AS30480(M )07/94]
Three different displays can be shown. Pressing
the ªDISPLAYº button will toggle between track
# and disc title, song title, and track # and
elapsed time.
[AS30482(M )07/94]
When a disc is ejected and another inserted, the
display will show the same selected display as
the disc that was ejected.
*
[AS30500(M )10/95]
How to eject the disc
[AS30600(M )05/94]
Push the ªEJECTº button in the upper left
corner of your Mini Disc player to stop play,
eject the disc and resume radio or tape operation
of your audio system.
File:09rcasm.ex
Update:Wed Mar 27 09:33:20 1996

155
*
[AS38075(M )05/95]
Ford Compact Disc Player
*
[AS38100(M )03/95]
The Ford Compact Disc Player operates when
the Audio System is on and a disc is inserted
(label side up). Handle the disc by its edge
only. (Be sure to read and follow all of the care
and cleaning instructions underHow To Take
Care of and Clean Your CD Player and Discsin this
section.)
*
[AS38200(M )06/95]
The digital display on your CD player shows the
track (selection) number and the elapsed time.
Indicators for play
a, stop
X, compression on
(ªCOMPº) and shuffle on (ªSHUFº) are also in
the display. (These features are described later.)
[AS38210(M )06/95]
Once a disc is inserted, operation of the CD
player will override that of the cassette player or
radio.
%*
[AS38250(M )10/95]
Using the Controls on Your New Compact
Disc Player
[AS38270(M )09/95]
NOTE: The volume, bass, treble, balance and
fader controls on the radio are also
used with the CD player. Refer to
Using the Controls on Your New Radio
in this section for operating
instructions on these controls.
*
[AS38300(M )10/95]
How to insert a disc and begin play
[AS38310(M )03/95]
Insert one disc,label side upinto the disc
opening. When inserted, the disc automatically
loads into the unit and play starts at the
beginning of the first track (selection). The play
indicator (
a) lights up and the number ª1º
(track) and ª0:00º (elapsed time) are shown in
the digital display.
*
[AS38320(M )10/95]
When the disc reaches the end, the disc player
automatically returns to the beginning of the
disc and resumes playing.
File:09rcasm.ex
Update:Wed Mar 27 09:33:20 1996

156
*
[AS38330(M )10/95]
NOTE: Once a disc is inserted, the disc
opening is secured to prevent the
accidental insertion of a second disc.
[AS38340(M )03/95]
NOTE: The CD player has heat protection
circuitry to protect the laser diode. If
the temperature of the player reaches
167ÊF (75ÊC), theheat detection circuit
will shut off the player and ªHOTº
will appear in the display. When the
temperature is within normal operating
range, the ªHOTº indication will turn
off and the CD player will again be
operational.
*
[AS38400(M )10/95]
How to stop and restart the CD player
[AS38450(M )03/95]
When a disc is loaded, the unit automatically
enters the play mode and the play indicator (
a)
illuminates. To stop temporarily, press the
ªPLAY/STOPº button. The stop indicator (
X)in
the display illuminates and operation returns to
the radio or tape mode. To resume CD play,
press this button once again or press any other
function button (except ªEJECTº or
ªCOMPRESSº buttons).
*
[AS38475(M )10/95]
NOTE: If the ignition key is turned OFF
during play and then is set to the ON
or ACCESSORY position, the CD
player will resume playing in the mode
it was in when ignition was turned off.
*
[AS38500(M )03/95]
How to locate a selection on your CD
player using Automatic Music Search (AMS)
*
[AS38510(M )06/95]
An ªAMSº (Automatic Music Search) control on
your CD player allows you to quickly find a
particular selection on the disc. Press the left
fside of the ªAMSº control to locate a
previous selection or the right
eside of the
ªAMSº control to locate a later selection.
File:09rcasm.ex
Update:Wed Mar 27 09:33:20 1996

157
*
[AS38550(M )10/95]
How to fast forward or reverse your CD
player
[AS38560(M )06/95]
To quickly search for a particular point in a
selection, press the right (
e) side of the
ªREV/FFº button (to fast forward) or the left
(
f) side (to rewind). While either side of the
button is pressed, the disc goes forward or
backward at two different speeds depending on
how long the button is held down. (Pressing the
button for more than a couple seconds will
speed up the process.) Release the button at the
desired point (found by watching the elapsed
playing time in the display or by listening to the
sound during fast forward or rewind).
*
[AS38580(M )06/95]
When you have reached the end of the disc by
keeping the fast forward
eside of the button
pressed, the display will show the end time of
the last track and the sound will be muted.
When the fast forward
eside of the button is
released, the player resumes play at the
beginning of the first track.
*
[AS38600(M )06/95]
A ª1º and ª0:00º will appear in the display
when the beginning of the disc is reached by
pressing the rewind
fside of the button.
*
[AS38620(M )10/95]
Using the ªSCANº function
*
[AS38630(M )03/95]
Press the ªSCANº button to enter the scan
mode. The CD player will begin scanning the
disc, stopping on each listenable track for
approximately eight seconds. This continues until
you press the ªSCANº button a second time or
eject the disc. While in the scan mode, the
display flashes ªSCAN.º
File:09rcasm.ex
Update:Wed Mar 27 09:33:20 1996

158
*
[AS39050(M )07/94]
Special Features of Your CD Player
*
[AS39100(M )10/95]
q
Compression
*
[AS39110(M )10/95]
The compression feature will bring soft and
loud passages closer together for a more
consistent listening level.
*
[AS39120(M )03/95]
To turn the compression on, press the
ªCOMPRESSº button. When on, the
compression indicator (ªCOMPº) will appear
in the display. Press the button again to turn
off.
*
[AS39150(M )03/95]
q
Shuffle
*
[AS39160(M )03/95]
The shuffle feature on your CD player allows
you to listen to your disc selections in a
different order. When this feature is
activated, your CD player will randomly
select and play tracks on the disc.
*
[AS39170(M )03/95]
Press the ªSHUFFLEº button to turn on,
press it again to turn off. When on, the
shuffle indicator (ªSHUFº) will appear in the
display. When the player is between
selections, the display will show a moving
dash (ªsº) around the perimeter of the
display.
*
[AS39200(M )03/95]
q
Shuffle and Scan
*
[AS39210(M )03/95]
Both the shuffle and scan features can be
activated simultaneously. In this mode, the
player will randomly pick a selection and
play the first eight seconds. This process is
continued until either the ªSCANº button or
ªSHUFFLEº button is pressed a second time.
*
[AS39250(M )10/95]
q
Automatic Disc Storage
[AS39260(M )03/95]
If the disc is ejected from the CD player but
is not removed from the disc opening within
approximately 15 seconds, the player will
automatically reload the disc for storage.
File:09rcasm.ex
Update:Wed Mar 27 09:33:20 1996

163
[AS43459(M )03/95]
Mach 460 Sound System
*
[AS43460(MBC )08/95]
Using the Controls on Your New Radio
*
[AS43470(MBC )10/95]
How to turn the radio on and off
*
[AS43480(MBC )10/95]
Press the ªPOWERº button to turn the radio on.
Press it again to turn it off.
*
[AS43500(MBC )10/95]
How to adjust the volume
[AS43510(MBC )06/95]
Press the +/sside of the ªVOLUMEº button to
increase/decrease volume. Bars illuminate in the
display to show the relative volume level.
*
[AS43520(MBC )10/95]
NOTE: If the volume level is set above a
certain listening level when the
ignition switch is turned off, when the
ignition switch is turned back on, the
volume will come back to a ªnominalº
listening level. However, if the radio
power is turned off, the volume will
remain in the position it was set at
when radio power was switched off.
*
[AS43530(MBC )10/95]
Selecting the AM or FM frequency band
*
[AS43540(MBC )02/95]
Push the ªAM/FMº button to select the desired
frequency band or to stop/store cassette tape
(when in cassette mode). Pushing the button
more than once will alternate between AM, FM1
and FM2. These functions are used with the
station memory buttons described underHow to
tune radio stations.
%*
[AS43550(MBC )10/95]
How to tune radio stations
*
[AS43560(MBC )10/95]
There are four ways for you to tune in a
particular station. You can manually locate the
station using the ªSCAN/TUNEº button,
ªSEEKº the station, ªSCANº to the station or
select the station by using the memory buttons,
which you can set to any desired frequency.
These four methods are described below.
File:09rcasm.ex
Update:Wed Mar 27 09:33:20 1996

164
*
[AS43570(MBC )09/95]
q
Using the ªTUNEº function
*
[AS43580(MBC )08/95]
You can change the frequency up or down
one increment at a time (FM changes in
increments of 200 kHz; AM changes in
increments of 10 kHz) by first pressing the
ªSCAN/TUNEº button twice (display shows
ªTUNEº), then Ðwithin approximately five
secondsÐ pressing and releasing either the
right (
a) or left (
b) side of the ªSEEKº
button. To change frequencies quickly, press
andhold downeither the right or left side of
the ªSEEKº button.
*
[AS43590(MBC )10/95]
Manual tuning adjusts your radio to any
allowable broadcast frequency, whether or
not a station is present on that frequency.
(SeeAll About Radio Frequenciesin this
section.)
*
[AS43600(MBC )10/95]
q
Using the ªSEEKº function
*
[AS43610(MBC )09/95]
This feature on your radio allows you to
automatically select listenable stations up or
down the frequency band. Press the right
(
a) side of the ªSEEKº button to select the
next listenable station up the frequency band.
Press the left (
b) side of the button to select
the next listenable station down the
frequency band. By holding the button down,
listenable stations can be passed over to reach
the desired station.
File:09rcasm.ex
Update:Wed Mar 27 09:33:20 1996

165
*
[AS43630(MBC )01/95]
q
Using the ªSCANº function
*
[AS43640(MBC )03/95]
Pressing the ªSCAN/TUNEº button once
enters the scan mode (display will indicate
ªSCNº). Pushing the right (
a) side of the
ªSEEKº button will begin the scan mode up
the frequency band, stopping on each
listenable station for approximately a
five-second sampling. Pushing the left (
b)
side of the ªSEEKº button will begin the scan
mode down the frequency band, again
stopping on each listenable station for
approximately a five-second sampling.
*
[AS43650(MBC )10/95]
To stop the scan mode on the presently
sampled station press the ªSCAN/TUNEº
button again.
*
[AS43670(MBC )10/95]
q
Setting the Station Memory Preset buttons
*
[AS43680(MBC )10/95]
Your radio is equipped with 6 station
memory buttons. These buttons can be used
to select up to 6 preset AM stations and 12
FM stations (6 in FM1 and 6 in FM2).
*
[AS43690(MBC )10/95]
Follow the easy steps below to set these buttons
to the desired frequencies:
*
[AS43700(MBC )10/95]
1. Select a band, then select a frequency.
*
[AS43720(MBC )10/95]
2. Press one of the memory preset buttons and
hold the button until the sound returns. That
station is now held in memory on that
button.
*
[AS43730(MBC )10/95]
3. Follow the two steps above for each station
memory preset button you want to set.
File:09rcasm.ex
Update:Wed Mar 27 09:33:20 1996

166
*
[AS43750(MBC )10/95]
q
Using the Automatic Memory Load feature
*
[AS43760(MBC )10/95]
If no stations are in memory preset, you can
activate theAuto Memory Loadfeature by
pressing and holding the ªAUTO PRESETº
buttonfor approximately three seconds.
Auto Memory Load sets all memory buttons
in AM, FM1 and FM2 sequentially by seeking
out the first six strong stations for the
respective band and storing them in memory
buttons 1-5. (FM2 will store the second set of
strong stations from the FM band.)
*
[AS43770(MBC )10/95]
With Auto Memory Store, you can
continually set strong stations into your
memory buttons without losing your existing
memory presets, which is especially handy
while traveling. Your radio will automatically
set your memory buttons to the strong local
stations so you don't have to continually
manually tune to existing stations.
*
[AS43780(MBC )10/95]
Activate Auto Memory Store by pushing the
ªAUTO PRESETº button once. Your radio
will set the first five strong stations of the
band you are in (AM, FM1 or FM2) into the
memory buttons. The display will show
ªAUTO,º then run through the frequencies,
stopping momentarily on the stations being
set into the memory buttons. The radio is
now in the ªAUTOº mode and the display
will show ªAUTOº each time a preset is
activated.
*
[AS43790(MBC )10/95]
NOTE: If there are fewer than five strong
stations in the frequency band, the
remaining unfilled buttons will store
the last strong station detected on the
band.
File:09rcasm.ex
Update:Wed Mar 27 09:33:20 1996

167
*
[AS43800(MBC )10/95]
After all stations have been filled, the radio
will begin playing the station stored on
memory button 1.
*
[AS43810(MBC )10/95]
To deactivate the Auto Memory Store mode
and return to the manually-set memory
button stations (or those stations set using
Auto Memory Load), simply push the
ªAUTO PRESETº button. Display will show
ªAUTOº then ªOFF.º The next time Auto
Memory Store is activated on that band, the
radio will store the next set of five strong
stations.
*
[AS43830(MBC )10/95]
Adjusting the tone balance and speaker
output of your radio
*
[AS43850(MBC )10/95]
q
Increasing or decreasing bass response
*
[AS43860(MBC )06/95]
Push the ªAUDIOº button repeatedly until
the display reads ªBASS.º Push the right (+)
side of the ªVOLUMEº button to increase
bass (more ªlowsº), and push the left (s)
side to decrease bass (less ªlowsº).
*
[AS43870(MBC )10/95]
q
Increasing or decreasing treble response
[AS43880(MBC )06/95]
Push the ªAUDIOº button repeatedly until
the display reads ªTREB.º Push the right (+)
side of the ªVOLUMEº button to increase
treble (more ªhighsº), and push the left (S)
side to decrease treble (less ªhighsº).
*
[AS43890(MBC )10/95]
q
Adjusting speaker balance
*
[AS43900(MBC )06/95]
Balance control allows you to adjust the
sound distribution between the right and left
speakers. Push the ªAUDIOº button
repeatedly until the display reads ªBAL.º
Push the right (+) side of the ªVOLUMEº
button to shift the sound to the right
speakers, and push the left (s) side to shift
the sound to the left speakers.
File:09rcasm.ex
Update:Wed Mar 27 09:33:20 1996