lumbar support FORD MUSTANG 2004 4.G SVT Supplement Manual

4–WAY HEAD RESTRAINTS
Your vehicle’s seats are equipped with four-way
adjustable head restraints. The purpose of these
head restraints is to help limit head motion in the
event of a rear collision. To properly adjust your
head restraints, lift the head restraint so that it is
located directly behind your head or as close to that
position as possible. Refer to the following to raise
and lower the head restraints.
The head restraints can
be moved in four
directions:
•up and down
•forward or backward
POWER LUMBAR, ADJUSTABLE BOLSTERS
AND SEAT ADJUSTMENT
Your driver seat is
equipped with 6–way
power seat adjustment,
power lumbar and power
adjustable bolster
controls. These features
allow the driver to adjust
the seat location, the
amount of lumbar
support and the fit of
the seat.
2004 Mustang(mus)
Supplement
USA English(fus)
Seating and energy management
11

Lumbar and adjustable bolster controls
The lumbar and adjustable bolster controls are
located on the front right corner of the driver seat.
The power lumbar feature creates lower back
support for the driver and may be adjusted to
increase or decrease the support. The seat back and
seat cushion bolsters inflate or deflate, allowing the
driver to create a firmer or more loose fitting seat.
Before adjusting these features, ensure that the seat
is in the driving position, then:
1. Seat back bolsters—Press
to deflate
(decrease firmness), press
to inflate (increase
firmness).
2. Seat cushion bolsters—Press
to deflate
(decrease firmness), press
to inflate (increase
firmness).
3. Lumbar controls—Press
to inflate (increase
lumbar support), or
to deflate (decrease lumbar
support.)
For maximum ease of vehicle ingress/egress, the seat
cushion and seat back bolsters should be completely
deflated.
2004 Mustang(mus)
Supplement
USA English(fus)
Seating and energy management
12