torque FORD MUSTANG 2004 4.G SVT Supplement Manual

•4.6L DOHC 32V Supercharged V–8 Engine with
Intercooler—390 horsepower, 390 lb-ft torque
•T56 6–speed transmission
•Aluminum flywheel
•Engine oil cooler
•Power steering cooler
•Anti-lock Brake System with Traction Control

•Independent rear suspension with limited-slip
differential
•SVT-tuned suspension and brakes
•17”x9”cast-aluminum wheels
•P275/40ZR17 BSW Performance Tires
•Specially tuned stainless steel exhaust system
•Decklid spoiler, hood, rocker moldings, front and
rear fascia
•Round fog lamps
•Color keyed fold-away mirrors
•Unique cloth top (convertible only)
•Interval wipers with aerodynamic wiper/blade
•Electroluminescent cluster with mechanical boost
gauge
•Sport seats with adjustable driver bolsters and
leather and preferred suede seating surfaces
•Sport pedals with aluminum covers
•Leather-wrapped sport steering wheel
2004 Mustang(mus)
Supplement
USA English(fus)
Cobra unique standard features
5

Item Description
ConfigurationLongitudinally mounted,
90-degree V8, cast-iron cylinder
block and cast aluminum
cylinder heads
Bore x Stroke90.2 x 90.0 mm (3.55 x 3.54 in)
Displacement4601 cc/280 cid
Compression ratio8.5:1
Horsepower290 kW @ 6000 rpm (390 HP @
6000 rpm)
Torque528 Nm @ 3500 rpm (390 lb.-ft.
@ 3500 rpm)
Redline6500 rpm (fuel shut-off at 6550
rpm)
Specific output84.8 HP per liter
ValvetrainDual overhead chain-driven
cams, roller finger followers
with hydraulic lash adjustment,
ovate-wire valve springs, four
valves per cylinder
Fuel systemSequential electronic fuel
injection
Mass air sensor90 mm (3.54 in) diameter
Throttle bodyTwin 57 mm (2.24 in) diameter
bore-simultaneously open
PistonsForged aluminum
CrankshaftForged steel
Connecting rodsManley Performance Forged
steel H-beam
SuperchargerEaton model 110, Roots-type
Exhaust manifoldsCast high-silicon, molybdenum
iron
Exhaust systemDual stainless steel
2004 Mustang(mus)
Supplement
USA English(fus)
Engine/Transmission
8

•In the event that you encounter an abnormally
harsh impact, inspect your tires for damage.
•Inspect your tires for damage on a regular basis.
If a tire is damaged, replace it immediately.
•Proper suspension alignment is critical for
maximum performance and optimal tire wear. If
you notice uneven tire wear, have your alignment
checked.
•Rotate tires as recommended in your Owner’s
Guide or SVT Owner’s Guide Supplement.
•When replacing tires, the only way to assure
original performance is to use the original
equipment tire. If a different tire is used, it should
be the same size, speed rating and load rating.
WHEELS
Your SVT vehicle is equipped with unique wheels
matched to the tires. These wheels are more
susceptible to damage due to their diameter, width
and low profile tires. To avoid damage to your
wheels:
•Maintain proper tire pressure (see“Tires”
previously listed).
•Extra caution should be taken when using
automatic car washes. Although your vehicle is
capable of being washed in an automatic car
wash, equipment may vary and wheel damage is
possible.
•When installing wheels, always torque lug nuts to
specification with a torque wrench.
•Inspect your wheels for damage on a regular
basis. If a wheel is damaged, replace it
immediately.
•In the event that you encounter an abnormally
harsh impact, inspect the outer diameter of your
wheels, both inside and out, for damage.
2004 Mustang(mus)
Supplement
USA English(fus)
Tire Information
21