start stop button FORD MUSTANG 2014 5.G Shelby GT500 Supplement Manual

AdvanceTrac® features when using launch control
Launch
control
buttonAdvanceTrac
button functionAdvanceTrac setting reverts to enabled with key cycle.
Anti-Lock Braking remains on in all modes.
Enabled
(Key-on)Traction control OFF
AdvanceTrac Enabled
(Single press)SPORT
(Foot on brake and
double tap)Disabled
(Press and hold with
vehicle stopped and
foot on brake)
OFFMode 1
•AdvanceTrac On
Normal
•TC On Normal
•LC OFFMode 2
•AdvanceTrac On
Normal
•TC OFF
•LC OFFMode 3
•AdvanceTrac SPORT
•TC On SPORT
•LC OFFMode 4
•AdvanceTrac OFF
•TC OFF
•LC OFF
ONMode 5
•AdvanceTrac On
Normal
•TC On Drag Start
Calibration
•LC ONMode 6
•AdvanceTrac On
Normal
•TC OFF
•LC RPM ONLYMode 7
•AdvanceTrac SPORT
•TC On Drag Start
Calibration
•LC ONMode 8
•AdvanceTrac OFF
•TC OFF
•LC UNAVAILABLE
Launch control setting does not turn ON/OFF with key cycle.
Launch control engine RPM setpoint range available in 100 RPM increments.
Launch control displays ACTIVE (mode 5 and 7) or RPM ONLY (mode 6) during PCM control of
the engine RPM.
Driving your Shelby® GT500®
17
2014 05+ Mustang(197)
Supplement, 1st Printing, December 2012
USA(fus)

To use launch control:
1. Start from a complete stop with the steering wheel pointed straight
ahead.
2. Press the LC button or go to
TRACK APPS>LAUNCH
CONTROL>LAUNCH CONTROL>ON
3. Fully press the clutch.
4. Select first gear.
5. Press the accelerator to the floor.
The engine will hold set RPM.
6. Quickly and smoothly release the clutch while maintaining pressure on
the accelerator.
7. Upshift normally.
To change the RPM setting:
1. Go to TRACK APPS>LAUNCH CONTROL>RPM Setting.
2. Choose the desired launch RPM.
3. Follow the on-screen prompts.
View/Clear Results
View and clear last and saved results of the accelerometer, acceleration
timer and brake performance.
•Acceleration Timer > Timer Results: Use the arrow buttons to scroll
through the Last results data. To save a last result, highlight the
desired result and press OK to save the data.
•Brake Performance > Brake results: Use the arrow buttons to scroll
through the last results data and press OK to save the data.
•All Time Best > All Time Best Results: Use the arrow buttons to scroll
through the results data and press OK to save the data.
•Clear Saved Data > Press OK to clear the data.
•Clear All Time Best > Press OK to clear the data.
•Clear Accelerometer > Press OK to clear the data.
Driving your Shelby® GT500®
21
2014 05+ Mustang(197)
Supplement, 1st Printing, December 2012
USA(fus)