spare wheel FORD MUSTANG 2022 Warranty Guide

TOWING POINTS (IF EQUIPPED)
Recovery Hook Location The recovery hook is in the spare wheel
storage tray.
Installing the Recovery Hook
There is an installation point for the
recovery hook behind the towing eye
attachment point cover.
To remove the towing eye attachment
point cover:
1. Gently press at the position indicated
until the left side of the cover pops out.
2. Gently remove the cover from the front
fascia by pulling on the left side of the
cover, away from the vehicle. Note:
The towing eye attachment point
cover has a small lanyard to keep it
attached to the bumper. Disconnect the
lanyard if necessary.
To install the recovery hook: Insert the recovery hook and turn it
counterclockwise to install it. Make sure
that you fully tighten the recovery hook.
Note:
The recovery hook has a left-hand
thread.
To re-install the towing eye attachment
point cover:
1. Insert the right side of the cover into the front fascia. There is a protruding
edge on the cover that inserts into the
fascia.
2. Push the left side of the cover into the front fascia until it is aligned with the
fascia and you hear a snap.
36
2022 Mustang (CZG) Mach 1, enUSA, Edition date: 202110, First-Printing Roadside EmergenciesE265227 E333098 E146284