remove seats FORD PROBE 1996 2.G Owners Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 1996, Model line: PROBE, Model: FORD PROBE 1996 2.GPages: 298, PDF Size: 2.53 MB
Page 37 of 298
![FORD PROBE 1996 2.G Owners Manual 35
*
[SR20480(ALL)05/95]
Rear Seats
[SR20490(ALL)06/95]
If you use a tethered safety seat on one of the
rear seats, install a tether anchor bracket to one
of the two 0.3 inch (8 mm) weld nuts on the
r FORD PROBE 1996 2.G Owners Manual 35
*
[SR20480(ALL)05/95]
Rear Seats
[SR20490(ALL)06/95]
If you use a tethered safety seat on one of the
rear seats, install a tether anchor bracket to one
of the two 0.3 inch (8 mm) weld nuts on the
r](/img/11/5320/w960_5320-36.png)
35
*
[SR20480(ALL)05/95]
Rear Seats
[SR20490(ALL)06/95]
If you use a tethered safety seat on one of the
rear seats, install a tether anchor bracket to one
of the two 0.3 inch (8 mm) weld nuts on the
rear of the cargo area below the opening for the
liftgate.
[SR20500(ALL)05/95]
Tether Anchorage Hardware
[SR20750(ALL)06/95]
Tether anchor hardware kits can be obtained at
no charge from any Ford or Lincoln-Mercury
dealer.
[SR20770(ALL)05/95]
Be sure to follow the child safety seat
manufacturer's instructions.
[SR20780(ALL)05/95]
RWARNING
Tighten the anchor according to
specifications. Otherwise, the safety seat
may not be properly secured and the child
may be injured in a sudden stop or
collision.
*
[SR20800(ALL)02/91]
Installing the Anchor Bracket
[SR21000(ALL)08/91]
1. Open the liftgate and take out the luggage
compartment cover (if equipped).
[SR21100(ALL)01/94]
2. The anchorage nuts used to secure the tether
anchor are located in the rear body panel
behind the trim at the rear of the luggage
compartment. Remove the trim panel. The
backside of the panel is scored at the
locations of the anchorage nuts. Make a hole
the size of the scoring in the trim panel to
provide access to the anchor nut. The hole
should be made on the same side of the
vehicle as the child safety seat will be
located. Reinstall the trim panel.
File:prsrp.ex
Update:Fri Jun 23 19:39:12 1995
Page 69 of 298
![FORD PROBE 1996 2.G Owners Manual 68
*
[IP05800(ALL)12/91]
Tips for Controlling the Temperature in
Your Vehicle
*
[IP05900(ALL)03/94]
q
To vary the temperature inside your vehicle,
move the temperature selector toward the red
area for FORD PROBE 1996 2.G Owners Manual 68
*
[IP05800(ALL)12/91]
Tips for Controlling the Temperature in
Your Vehicle
*
[IP05900(ALL)03/94]
q
To vary the temperature inside your vehicle,
move the temperature selector toward the red
area for](/img/11/5320/w960_5320-68.png)
68
*
[IP05800(ALL)12/91]
Tips for Controlling the Temperature in
Your Vehicle
*
[IP05900(ALL)03/94]
q
To vary the temperature inside your vehicle,
move the temperature selector toward the red
area for warmer air and toward the blue area
for cooler air.
*
[IP06000(ALL)03/94]
q
If you drive with the fan off and the
windows closed, the windows may fog up.
To prevent fogging:
[IP06150(ALL)04/95]
1. Set the function selector control to VENT,
MIX, FLOOR or theVposition.
*
[IP06200(ALL)01/89]
2. Set the desired temperature.
*
[IP06300(ALL)01/89]
3. Set the desired fan speed.
*
[IP06400(ALL)12/91]
q
Do not put objects under the front seats that
will interfere with the flow of air to the back
seats.
*
[IP06500(ALL)12/03]
q
Remove any snow, ice, or leaves from the
area below the windshield on the outside of
your vehicle. They could block the air intake.
*
[IP06600(ALL)06/93]
Air Conditioning System (If equipped)
[IP06850(ALL)01/95]
Operate the air conditioning by using the climate
controls on the center of the instrument panel.
[IP06900(ALL)08/91]
one third page art:0032041-A
Air conditioning controls
File:pripp.ex
Update:Fri Jun 23 19:37:35 1995
Page 112 of 298
![FORD PROBE 1996 2.G Owners Manual 112
*
[FV18100(ALL)05/95]
RWARNING
Do not remove the floor carpet in your
vehicle. Emission controls cause high
exhaust temperatures under the floor.
[FV18150(ALL)11/91]
NOTE: When returning the foldi FORD PROBE 1996 2.G Owners Manual 112
*
[FV18100(ALL)05/95]
RWARNING
Do not remove the floor carpet in your
vehicle. Emission controls cause high
exhaust temperatures under the floor.
[FV18150(ALL)11/91]
NOTE: When returning the foldi](/img/11/5320/w960_5320-111.png)
112
*
[FV18100(ALL)05/95]
RWARNING
Do not remove the floor carpet in your
vehicle. Emission controls cause high
exhaust temperatures under the floor.
[FV18150(ALL)11/91]
NOTE: When returning the folding seats to the
upright position, remember to return
rear shoulder belts to their proper
position.
[FV18175(ALL)03/94]
NOTE: Your vehicle has stowage hooks on the
rear, lower, side trim panel on which
to hook the safety belts when not in
use. Simply hook the tongue slot over
the stowage hook.
[FV18180(ALL)04/95]
Cleaning the Seats
*
[FV18185(ALL)05/95]
Leather
*
[FV18190(ALL)05/95]
For routine cleaning, wipe the surface with a
soft, damp cloth. For more thorough cleaning,
wipe the surface with a leather and vinyl cleaner
or a mild soap.
%*
[FV18192(ALL)04/95]
Fabric
*
[FV18194(ALL)05/95]
Remove dust and loose dirt with a whisk broom
or a vacuum cleaner. Remove fresh spots
immediately. Follow the directions that come
with the cleaner.
*
[FV18196(ALL)04/95]
NOTE: Before using any cleaner, test it on a
small, hidden area of fabric. If the
fabric's color or texture is adversely
affected by a particular cleaner, do not
use it.
File:prfvp.ex
Update:Fri Jun 23 19:36:28 1995