buttons FORD RANGER 1997 2.G Owners Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 1997, Model line: RANGER, Model: FORD RANGER 1997 2.GPages: 361, PDF Size: 3.39 MB
Page 31 of 361
28
[AS29217(R)05/96]
Stereo Cassette with CD DJ Compatibility
*
[AS29220(R)03/96]
Using the Controls on Your New Radio
*
[AS29225(R)03/96]
How to turn the radio on and off
*
[AS29230(R)01/95]
Press the ªVOL/PUSHº knob to turn the radio on. Press again
to turn it off.
*
[AS29235(R)03/96]
How to adjust the volume
[AS29240(R)06/95]
Turn the ªVOL/PUSHº knob clockwise to increase the volume
and counterclockwise to decrease the volume. Bars illuminate in
the display to show relative volume level.
*
[AS29245(R)02/96]
NOTE: If the volume level is set above a certain listening
level when the ignition switch is turned off, when the
ignition switch is turned back on, the volume will
come back to a ªnominalº listening level. However, if
the radio power is turned off, the volume will remain
in the position it was set at when radio power was
switched off.
*
[AS29250(R)03/96]
Selecting the AM or FM frequency band
*
[AS29255(R)02/95]
Push the ªAM/FMº button to select the desired frequency band
or to stop/store cassette tape (when in cassette mode). Pushing
the button more than once will alternate between AM, FM1 and
FM2. These functions are used with the station memory buttons
described underHow to tune radio stations.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997
Page 32 of 361
Electronic Sound Systems
29
%*
[AS29260(R)03/96]
How to tune radio stations
[AS29265(R)10/94]
There are four ways for you to tune in a particular station. You
can use the ªTUNEº, ªSEEKº, ªSCANº or the memory buttons.
*
[AS29270(R)03/96]
n
Using the ªTUNEº function
[AS29275(R)03/95]
You can change the frequency up or down one increment at
a time by pressing and releasing either the left (
b) or right
(
a) side of the ªTUNEº button. To change frequencies
quickly, press and hold down either the right or left side of
the button.
*
[AS29280(R)03/96]
Manual tuning adjusts your radio to any allowable broadcast
frequency, whether or not a station is present on that
frequency. (SeeAll About Radio Frequenciesin this section.)
*
[AS29285(R)04/96]
n
Using the ªSEEKº function
[AS29290(R)09/94]
This feature on your radio allows you to automatically select
listenable stations up or down the frequency band. Press the
right (
a) side of the ªSEEKº button to select the next
listenable station up the frequency band. Press the left (
b)
side of the button to select the next listenable station down
the frequency band. By pressing and holding the button,
listenable stations can be passed over to reach the desired
station.
*
[AS29295(R)04/96]
n
Using the ªSCANº function
*
[AS29305(R)03/96]
Pressing the ªSCANº button will begin the scan mode up
the frequency band, stopping on each listenable station for
approximately five seconds.
*
[AS29310(R)03/96]
To stop the scan mode on the presently sampled station,
press the ªSCANº button again.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997
Page 33 of 361
30
*
[AS29315(R)03/96]
n
Setting the station MEMORY PRESET buttons
*
[AS29320(R)03/96]
Your radio is equipped with 6 station memory buttons.
These buttons can be used to select up to 6 preset AM
stations and 12 FM stations (6 in FM1 and 6 in FM2)
*
[AS29325(R)08/95]
Follow the easy steps below to set these buttons to the desired
frequencies:
*
[AS29330(R)03/96]1.
Select a band, then select a frequency.
*
[AS29340(R)10/95]2.
Press one of the memory preset buttons and hold the button
until the sound returns. That station is now held in memory
on that button.
*
[AS29345(R)10/95]3.
Follow the two steps above for each station memory preset
button you want to set.
*
[AS29350(R)01/95]
n
Using the AUTOSET feature
*
[AS29355(R)01/95]
With AUTOSET, you can continually set strong stations into
your memory buttons without losing your originally set
stations.
*
[AS29360(R)01/95]
Press the ªAUTOSETº button once. Your radio will set the
first six strong stations of the band you are in (AM, FM1, or
FM2) into the memory buttons. The display will show
ªAUTOº, then run through the frequencies setting the
memory buttons.
*
[AS29365(R)10/95]
NOTE: If there are fewer than five strong stations in the
frequency band, the remaining unfilled buttons will
store the last strong station detected on the band.
*
[AS29370(R)01/95]
When all stations are filled, the radio will begin playing the
station stored in memory button 1.
*
[AS29375(R)01/95]
To deactivate the Auto Memory Store mode and return to
manually-set memory button stations, press the ªAUTOSETº
button. Display will show ªAUTOº then ªOFFº.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997
Page 38 of 361
Electronic Sound Systems
35
[AS29710(R)09/95]
NOTE: With the ignition off, the clock will display for
approximately 5 seconds once the ªCLKº button is
depressed and released.
*
[AS29715(R)05/96]
How to set the clock
*
[AS29720(R)05/96]1.
Turn the radio on.
[AS29725(R)05/96]2.
Press and hold the ªCLKº button, press the right (
a) side of
the ªSEEKº button to increase hours. Press the left (
b) side
of the button to decrease hours. Press the right (
a) side of
the ªTUNEº button to increase minutes. Press the left (
b)
side of the button to decrease minutes.
*
[AS29730(R)05/96]
NOTE: The clock displays 12-hour time with no AM/PM
indications.
[AS29735(R)09/94]
Ford 6-CD Changer (If equipped)
[AS29745(R)03/95]
The Ford Ranger (Regular Cab) 6-CD Changer is mounted
behind the driver's seat. The Ford Ranger (SuperCab) 6-CD
Changer is mounted on the floor near the center of the rear cab
wall. Both changers are controlled with buttons on the Audio
System.
[AS29750(R)10/94]
Unit Loading Instructions
[AS29755(R)06/95]1.
Open Compact Disc Changer unit by sliding door rearward
(Figure 1).
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997
Page 42 of 361
Electronic Sound Systems
39
*
[AS29850(R)10/95]
How to change the track being played
[AS29855(R)04/94]
There are two ways to change the track being played. You can
use the ªSEEKº or ªSCANº buttons.
[AS29860(R)04/94]
n
Using the ªSEEKº function with your CD-Changer
[AS29865(R)10/94]
Press the right (
a) side of the ªSEEKº button to seek
forward to the next track of the current disc. After the last
track has been completed, the CD player automatically
changes to the next disc.
[AS29870(R)04/94]
Press the left (
b) side of the ªSEEKº button to seek to the
previous track on the current disc.
[AS29875(R)04/94]
n
Using the SCAN function with your CD Changer
[AS29880(R)10/94]
Press the ªSCANº button to move forward to the next track.
Approximately an eight-second sampling of the track will be
played before moving to the next track. The display will
indicate the disc and track number (dd-tt). At the end of the
disc, the CD Changer automatically changes to the next disc.
[AS29885(R)04/94]
To end the scan mode, press the ªSCANº button a second
time.
*
[AS29905(R)04/95]
Operating the CD Compression feature
[AS29910(R)04/94]
Because of the wide dynamic range of Ford's 6-CD Changer
System, soft passages may be difficult to hear under certain
driving conditions while maintaining a reasonable volume level
in the louder passages. The compression feature will bring these
soft and loud passages closer together for a more consistent
listening level.
*
[AS29915(R)01/95]
To turn the compression on, press the ªCOMPRESSº/#5 button.
When the compression feature is activated, the display will
indicate ªCº.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997
Page 49 of 361
46
[AS29969(R)05/96]
Electronic Search, Search Cassette Radio,
and Search Single Disc CD Radio
*
[AS29970(R)03/96]
Using the Controls on Your New Radio
*
[AS29972(R)03/96]
How to turn the radio on and off
*
[AS29973(R)03/96]
Press the ªVOL/PUSH ONº knob to turn the radio on. Press
again to turn it off.
*
[AS29975(R)03/96]
How to adjust the volume
[AS29980(R)06/95]
Turn the ªVOL/PUSH ONº knob clockwise to increase the
volume and counterclockwise to decrease the volume. Bars
illuminate in the display to show relative volume level.
*
[AS29985(R)02/96]
NOTE: If the volume level is set above a certain listening
level when the ignition switch is turned off, when the
ignition switch is turned back on, the volume will
come back to a ªnominalº listening level. However, if
the radio power is turned off, the volume will remain
in the position it was set at when radio power was
switched off.
*
[AS29990(R)03/96]
Selecting the AM or FM frequency band
[AS29995(R)10/94]
Push the ªAMº/FMª button to select the desired frequency
band or to stop/store cassette tape (when in cassette mode).
These functions are used with the station memory buttons
described underHow to tune radio stations.
%*
[AS30000(R)03/96]
How to tune radio stations
[AS30005(R)04/95]
There are four ways for you to tune in a particular station. You
can manually locate the station using the ºTUNEª button,
ºSEEKª button, ºSCANª button, or select the station by using
the memory buttons, which you can set to any desired
frequency. These four methods are described below.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997
Page 50 of 361
Electronic Sound Systems
47
*
[AS30010(R)03/96]
n
Using the ºTUNEª function
*
[AS30015(R)03/96]
You can change the frequency up or down one increment at
a time by pressing and releasing either the left
bor right
aside of the ºTUNEª button.
*
[AS30020(R)03/96]
Manual tuning adjusts your radio to any allowable broadcast
frequency, whether or not a station is present on that
frequency. (SeeAll About Radio Frequenciesin this section.)
*
[AS30025(R)04/96]
n
Using the ºSEEKª function
[AS30030(R)05/96]
This feature on your radio allows you to automatically select
listenable stations up or down the frequency band. Press the
right (
a) side of the ºSEEKª button to select the next
listenable station up the frequency band. Press the left (
b)
side of the button to select the next listenable station down
the frequency band. By holding the button down, listenable
stations can be passed over to reach the desired station.
*
[AS30035(R)04/96]
n
Using the ºSCANª function
*
[AS30040(R)03/96]
Pressing the ºSCANª button will begin the scan mode up
the frequency band, stopping on each listenable station for
approximately five seconds.
*
[AS30045(R)03/96]
To stop the scan mode on the presently sampled station,
press the ºSCANª button again.
*
[AS30050(R)02/96]
n
Setting the Station Memory Preset buttons
*
[AS30055(R)10/95]
Your radio is equipped with 6 station memory buttons.
These buttons can be used to select up to 6 preset AM
stations and 12 FM stations (6 in FM1 and 6 in FM2).
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997
Page 51 of 361
48
*
[AS30060(R)08/95]
Follow the easy steps below to set these buttons to the desired
frequencies:
*
[AS30065(R)03/96]1.
Select a band, then select a frequency.
*
[AS30075(R)10/95]2.
Press one of the memory preset buttons and hold the button
until the sound returns. That station is now held in memory
on that button.
*
[AS30080(R)10/95]3.
Follow the two steps above for each station memory preset
button you want to set.
*
[AS30085(R)10/95]
Adjusting the tone balance and speaker output of your
radio
*
[AS30090(R)02/96]
n
Increasing or decreasing bass response
*
[AS30095(R)03/96]
Press the top
cof the ºBASSª button to increase bass; press
the bottom
dof the ºBASSª button to decrease bass.
*
[AS30100(R)02/96]
n
Increasing or decreasing treble response
*
[AS30105(R)03/96]
Press the top
cof the ºTREBLEª button to increase treble;
press the bottom
dof the treble button to decrease treble.
*
[AS30110(R)02/96]
n
Adjusting speaker balance
*
[AS30115(R)03/96]
Balance control allows you to adjust the sound distribution
between the right and left speakers. Press the top
cof the
ºBALª button to shift the sound to the right speakers, and
press the bottom
dof the ºBALª button to shift the sound
to the left speakers.
*
[AS30120(R)04/96]
n
Adjusting speaker fader
*
[AS30125(R)03/96]
Fade control allows you to adjust the sound distribution
between the front and rear speakers. Press the top
cof the
ºFADEª button to shift the sound to the front speakers, and
press the bottom
dof the ºFADEª button to shift the sound
to the back speakers.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997
Page 96 of 361
Controls and Features
93
*
[CF80000(R)05/96]
Remote Entry System (If equipped)
[CF80010(R)01/96]
If your vehicle has the remote entry system, you can lock or
unlock the vehicle doors without using a key. The remote also
has a personal alarm feature. The buttons for the system are
located on the hand held transmitter that came with your
vehicle.
[CF80016(R)01/96]
The system will work with up to four transmitters. Your vehicle
came with one transmitter. Additional transmitters can be
ordered from your dealer.
*
[CF80018(R)01/96]
The remote entry features only operate with the ignition in the
OFF position.
File:05uncfr.ex
Update:Thu Mar 20 08:51:14 1997