clip FORD S-MAX 2006 Service User Guide

12.\b2.
Inst\bll\fthe\fglow\fpower\fsupply.\f
1
3. \b3.
Connect\fthe\ffuel\finjector\felectric\bl\fconnectors.\f

A

tt\bch\fthe\fwiring\fh\brness\fclips\fto\fthe\fcylinder\fhe\bd.\f\f
14

. \b4.
Apply\fso\bp\fsolution\fto\fthe\fb\bll\fclip\fmountings\fin\fthe\fengine\fupper\fcover.\f\f

S

o\bp\fsolution\f(m\bximum\fconcentr\btion\fof\fso\bp\fin\fw\bter\f1:200).\f\f
15

. CAUTION:\fCont\bct\fof\fthe\fengine\fupper\fcover\fwith\fthe\fcowl\fp\bnel\fm\by\fc\buse\f
d \b

m\bge\f(scr\btches)\fon\fthe\fengine\fupper\fcover.\fF\bilure\fto\ffollow\fthis\finstruction\f
m\by\fc\buse\fthe\fengine\fupper\fcover\fto\fbe\fd\bm\bged.\f\f
\b5. Put\fthe\fengine\fcover\finto\finst\bll\btion\fposition\f\bnd\fclip\fit\fin\fpl\bce\fby\fpressing\f\bt\f
th
e\fpl\bces\fshown.\f\f


M\bke\fsure\fth\bt\fthe\fengine\fupper\fcover\fis\ffully\feng\bged\fin\fthe\f\bre\b\fof\fthe\ffuel\ffilter,\f
if\fnecess\bry\f\bpply\fmore\fpressure\fin\fthe\f\bre\bs\fshown.\f\f
16. \b6.
Inst\bll\fthe\fglow\fplug\frel\by\f\bnd\fclose\fthe\fCJB.\f
1

7. \b7.
Reset\fthe\fPCM\ff\bult\fmemory.\f
M

easure the oil pressure (2\b \b\b3 0)
\f\f
\f\f
\f\f
Стр. 8 из 11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506580&gui...procarmanuals.com
http://vnx.su

The\foil\fpressure\fdepends\fon\fv\brious\ff\bctors\f(engine\fspeed,\foil\ftemper\bture,\foil\fviscosity,\f
\bmount\fof\foil\ffilter\fcont\bmin\btion\fetc.).\f
Measure the oil pressure (Engine - \b.8L \furatorq-T\fCI (Kent) \fiesel)
NOTE:\fMe\bsure\fthe\foil\fpressure\f\bt\fthe\fspecified\fengine
\fspeed.\f
1. NOTE:\fThe\fengine\fupper\fcover\fis\fheld\fin\fpl\bce\fby\f4\fb\bll\fclips.\fThe\fb\bll\fclips\f\bre\fnot\f
v
e

rtic\bl,\fbut\f\bre\f\bngled\fb\bckw\brds\fby\f\bpproxim\btely\f20\fdegrees.\f
\b. Loc\btion\fof\fthe\fengine\fupper\fcover\fret\bining\fclips.\f
2. CAUTIONS:\f
C\b
re\fmust\fbe\ft\bken\fwhen\frele\bsing\fthe\f4th\fret\bining\fclip\f\bnd\fm\bnoeuvering\f
the\fengine\fupper\fcover\fp\bst\fthe\fm\bnifold\f\bbsolute\fpressure\f(MAP)\fsensor.\fF\bilure\f
to\ffollow\fthis\finstruction\fm\by\fresult\fin\fd\bm\bge\fto\fthe\fMAP\fsensor.\f\f
Cont\bct\fof\fthe\fengine\fupper\fcover\fwith\fthe\fcowl\fp\bnel\fm\by\fc\buse\fd\bm\bge\f
(scr\btches)\fon\fthe\fengine\fupper\fcover.\fIf\fthe\f\bmbient\ftemper\bture\fis\fbelow\f0°C,\f
det\bch\fthe\fengine\fupper\fcover\fwith\fextreme\fc\bution.\fF\bilure\fto\ffollow\fthis\f
instruction\fm\by\fc\buse\fthe\fengine\fupper\fcover\fto\fbe\fd\bm\bged.\f
NOTE:\fOnly\fremove\f\bnd\finst\bll\fthe\fengine\fupper\fcover\fin\fthe\fsequence\fshown.\f\f
2. Remove\fthe\fengine\fupper\fcover.\f
3. 3.
Disconnect\fthe\foil\fpressure\fswitch\felectric\bl\fconnector\f(components\fshown\f
r
emoved\ffor\fcl\brity).\f
\f\f
\f\f
\f\f
Стр. 9 из 11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506580&gui...procarmanuals.com
http://vnx.su

4.4.
Remove\fthe\foil\fpressure\fswitch\f(components\fshown\fremoved\ffor\fcl\brity).\f
5
. NOTE:\fMe\bsure\fthe\foil\fpressure\f\bt\fthe\fspecified\fengine\fspeed.\fMe\bsure\fthe\foil\f
pr

essure\f\bt\f\bn\foil\ftemper\bture\fof\f80°\fC.\f
NOTE:\fMe\bsure\fthe\foil\fpressure\f\bt\fidle\fspeed\f\bnd\f\bt\f2000\frpm.\f
NOTE:\fOil\fpressure\f\bt\fidle\fspeed:\f0.75\fb\br.\f
NOTE:\fOil\fpressure\f\bt\f2000\frpm:\f1.5\fb\br.\f
5. Att\bch\fthe\foil\fpressure\fg\buge\fwith\fthe\foil\fpressure\fg\buge\fconnector.\f
6. 6.
Check\fthe\foil\fpressure.\f
7

. 7.
Det\bch\fthe\foil\fpressure\fg\buge\f\bnd\fthe\foil\fpressure\fg\buge\fconnector.\f
8

. 8.
Co\bt\fthe\foil\fpressure\fswitch\fwith\f \b
dhesive.\f
9. 9.
Inst\bll\fthe\foil\fpressure\fswitch.\f
1

0. \b0.
Connect\fthe\foil\fpressure\fswitch\felectric\bl\fconnector.\f
1

1. \b\b.
Apply\fso\bp\fsolution\fto\fthe\fb\bll\fclip\fmountings\fin\fthe\fengine\fupper\fcover.\f\f

S

o\bp\fsolution\f(m\bximum\fconcentr\btion\fof\fso\bp\fin\fw\bter\f1:200).\f\f \f
\f
\f\f
\f\f
Стр. 10 из 11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506580&gui...procarmanuals.com
http://vnx.su

12.CAUTION:\fCont\bct\fof\fthe\fengine\fupper\fcover\fwith\fthe\fcowl\fp\bnel\fm\by\fc\buse\f
d\b
m\bge\f(scr\btches)\fon\fthe\fengine\fupper\fcover.\fF\bilure\fto\ffollow\fthis\finstruction\f
m\by\fc\buse\fthe\fengine\fupper\fcover\fto\fbe\fd\bm\bged.\f\f
\b2. Put\fthe\fengine\fcover\finto\finst\bll\btion\fposition\f\bnd\fclip\fit\fin\fpl\bce\fby\fpressing\f\bt\f
t h

e\fpl\bces\fshown.\f\f


M\bke\fsure\fth\bt\fthe\fengine\fupper\fcover\fis\ffully\feng\bged\fin\fthe\f\bre\b\fof\fthe\ffuel\ffilter,\f
if\fnecess\bry\f\bpply\fmore\fpressure\fin\fthe\f\bre\bs\fshown.\f\f
Valve train analysis - static (engine off)
Re
move\fthe\fv\blve\fcover.\f\f
Check\f\bll\fv\blve\ftr\bin\fcomponents\ffor\fd\bm\bge\f\bnd\fwe\br.\fEnsure\fth\bt\fonly\forigin\bl\f
components\f\bre\finst\blled\f\bnd\fth\bt\f\bll\fbolts\f\bnd\fnuts\fh\bve\fbeen\ftightened\fto\fthe\fcorrect\f
tightening\ftorque.\f
\f\f
Стр. 11 из 11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506580&gui...procarmanuals.com
http://vnx.su

19. \f
20. Disc\brd\fthe\ffuel\finjector\ffuel\freturn\fline\fret\bining\fclips.\f\f
21. NOTE:\fNote\fthe\fposition\fof\fe\bch\fcomponent\f
b
e

fore\fremov\bl.\f
Inst\bll\f\b\fcle\bn\fbl\bnking\fc\bp\fto\fthe\ffuel\f
in

jector\ffuel\freturn\fline\fport.\f\f
22. \f
23. \f
\f\f
\f\f
\f\f
\f\f
\f\f
Стр. 5 из
9
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G837772&gui...procarmanuals.com
http://vnx.su

100\fNm\f
180
°\f
2\f47\fNm
\f
St\bge\f1:\f
St\bge\f2:\f
26. Torque:\b
Glow\fplugs\f15\fNm
\f
Glow\fplug\fwire\felectric\bl\fconnector\fret\bining\f
nuts\f\f2,5\fNm
\f
27. NOTE:\fM\bke\fsure\fth\bt\fnew\fcomponents\f\bre\f
in

st\blled.\f
28. NOTE:\fM\bke\fsure\fth\bt\fthese\fcomponents\f\bre\f
i
n

st\blled\fto\fthe\fnoted\fremov\bl\fposition.\f
Torque:\b 37\fNm
\f
29. Push\fthe\ffuel\finjector\ffuel\freturn\fline\fgently\finto\f
the\ffuel\finjector.\fM\bke\fsure\fth\bt\fnew\ffuel\finjector\f
fuel\freturn\fline\fclips\f\bre\finst\blled.\fDo\fnot\fdistort\f
the\ffuel\finjector\ffuel\freturn\fline\fret\bining\fclip\f
when\finst\blling\fit\fto\fthe\ffuel\finjector.\fF\bilure\fto\f
follow\fthis\finstruction\fm\by\fresult\fin\ffuel\fle\bks.\f
\f\f
\f\f
\f\f
\f\f
Стр. 6 из
11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G837773&gui...procarmanuals.com
http://vnx.su

8.NOTE:\fThe\fengine\fupper\fcover\fis\fheld\fin\fpl\bce\fby\f3\fb\bll\fclips.\fThe\fb\bll\fclips\f\bre\fnot\f
ve
rtic\bl,\fbut\f\bre\f\bngled\fb\bckw\brds\fby\f\bpproxim\btely\f20\fdegrees.\f
8. Loc\btion\fof\fthe\fengine\fupper\fcover\fb\bll\fclips.\f\f
9. CAUTION:\fCont\bct\fof\fthe\fengine\fupper\fcover\fwith\fthe\fcowl\fp\bnel\fm\by\fc\buse\f
d \b

m\bge\f(scr\btches)\fon\fthe\fengine\fupper\fcover.\fIf\fthe\f\bmbient\ftemper\bture\fis\fbelow\f
0°C,\fdet\bch\fthe\fengine\fupper\fcover\fwith\fextreme\fc\bution.\fF\bilure\fto\ffollow\fthis\f
instruction\fm\by\fc\buse\fthe\fengine\fupper\fcover\fto\fbe\fd\bm\bged.\f
NOTE:\fOnly\fremove\f\bnd\finst\bll\fthe\fengine\fupper\fcover\fin\fthe\fsequence\fshown.\f
9. Remove\fthe\fengine\fupper\fcover.\f

Det\bch\fthe\fengine\fupper\fcover\fb\bll\fclips\fin\fthe\fsequence\fshown.\f
1 0

. CAUTION:\fDo\fnot\fdisconnect\fthe\ffuel\finjection\fpump\felectric\bl\fconnectors\f\bnd\f
cr

\bnk\fthe\fengine.\f
10. Disconnect\fthe\ffuel\finjector\felectric\bl\fconnectors.\f
11. 11.
Remove\fthe\fexh\bust\fg\bs\frecircul\btion\f(EGR)\fcooler.\fREFER\fto:\f E
xh\bust\fG\bs\f
Rec
ircul\btion\f(EGR)\fCooler \f(303-08C\fEngine\fEmission\fControl\f-\f1.8L\fDur\btorq-TDCi
\f
(74kW/100PS)\f-\fLynx/1.8L\fDur\btorq-TDCi\f(92kW/125PS)\f-\fLynx,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
12. 1\b.
Remove\fthe\fEGR\fv\blve.\fREFER\fto:\f E
xh\bust\fG\bs\fRecircul\btion\f(EGR)\fV\blve\f(303-
08D
\fEngine\fEmission\fControl\f-\f2.0L\fDur\btorq-TDCi\f(85kW/115PS)\f-\fDW/2.0L\f
\f\f
\f\f
\f\f
Стр. 7 из 13
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G549215&gui...procarmanuals.com
http://vnx.su

18.18.
Inst\bll\fthe\fglow\fplugs.\f
1
9. 19.
Inst\bll\fthe\fglow\fplug\fpower\fsupply.\f
2

0. \b0.
Inst\bll\fthe\fEGR\fv\blve.\f\f
R
EFER\fto:\f Exh\bust\fG\bs\fRecircul\btion\f(EGR)\fV\blve \f(303-
08D\fEngine\fEmission\fControl\f
-\f2.0L\fDur\btorq-TDCi\f(85kW/115PS)\f-\fDW/2.0L\fDur\btorq-TDCi\f(100kW/136PS)\f-\f
DW/2.0L\fDur\btorq-TDCi\f(103kW/140PS)\f-\fDW,\fEmission\fRequirements:\fSt\bge\fIV,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
21. \b1.
Inst\bll\fthe\fEGR\fcooler.\fREFER\fto:\f E
xh\bust\fG\bs\fRecircul\btion\f(EGR)\fCooler\f(303-
08C
\fEngine\fEmission\fControl\f-\f1.8L\fDur\btorq-TDCi\f(74kW/100PS)\f-\fLynx/1.8L\f
Dur\btorq-TDCi\f(92kW/125PS)\f-\fLynx,\fRemov\bl\f\bnd\fInst\bll\btion).\f
22. \b\b.
Connect\fthe\ffuel\finjector\felectric\bl\fconnectors.\f
2

3. \b3.
Apply\fso\bp\fsolution\fto\fthe\fb\bll\fclip\fmountings\fin\fthe\fengine\fupper\fcover.\f

S

o\bp\fsolution\f(m\bximum\fconcentr\btion\fof\fso\bp\fin\fw\bter\f1:200).\f \f
\f
\f\f
\f\f
Стр. 9 из 13
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G549215&gui...procarmanuals.com
http://vnx.su

24.CAUTION:\fCont\bct\fof\fthe\fengine\fupper\fcover\fwith\fthe\fcowl\fp\bnel\fm\by\fc\buse\f
d\b
m\bge\f(scr\btches)\fon\fthe\fengine\fupper\fcover.\fF\bilure\fto\ffollow\fthis\finstruction\f
m\by\fc\buse\fthe\fengine\fupper\fcover\fto\fbe\fd\bm\bged.\f
\b4. Put\fthe\fengine\fcover\finto\finst\bll\btion\fposition\f\bnd\fclip\fit\fin\fpl\bce\fby\fpressing\f\bt\f
th
e\fpl\bces\fshown.\f


M\bke\fsure\fth\bt\fthe\fengine\fupper\fcover\fis\ffully\feng\bged\fin\fthe\f\bre\b\fof\fthe\ffuel\ffilter,\f
if\fnecess\bry\f\bpply\fmore\fpressure\fin\fthe\f\bre\bs\fshown.\f
25. \b5.
Inst\bll\fthe\fcowl\fp\bnel\fgrille.\f\f
R
EFER\fto:\f Cowl\fP\bnel\fGrille \f(501-02\fFront\fEnd\fBody\fP\bnels,\fRemov\bl\f\bnd\f
Ins

t\bll\btion).\f
26. \b6.
R\bise\f\bnd\fsupport\fthe\fvehicle.\fREFER\fto:\f L
ifting\f(100-02\fJ\bcking\f\bnd\fLifting,\f
Des
cription\f\bnd\fOper\btion).\f
27. \b7.
Inst\bll\fthe\fglow\fplug\frel\by.\f
2

8. \b8.
Inst\bll\fthe\fr\bdi\btor\fundershield.\f
\f\f
\f\f
\f\f
Стр. 10 из 13
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G549215&gui...procarmanuals.com
http://vnx.su

Description
Upper c\bmpressi\bn ring
L\bwer c\bmpressi\bn ring
Oil c\bntr\bl 'scraper' ring
Gudge\bn pin
Gudge\bn pin circlip (2 \bff)
Pist\bn and c\bnnecting r\bd assembly
C\bnnecting r\bd big-end
C\bnnecting r\bd s\faft
C\bnnecting r\bd small-end
Small-end bus\fing
Pist\bn cr\bwn c\b\bling c\fannel
Pist\bn bus\f (2 \bff per pist\bn)
Connecting rods
T\f
e c\bnnecting r\bds are made fr\bm f\brged steel.
T\fe c\bnnecting r\bd small-
end is narr\bwed \bn eac\f side t\b f\brm a tapered \fead. T\fe taper impr\bves t\fe distributi\bn \bf f\brce
between t\fe pist\bn and c\bnnecting r\bd during t\fe c\bmbusti\bn str\bke.
A br\bnze bus\f is installed in t\fe small-
end, and f\brmed wit\f an internal gr\b\bve t\b all\bw t\fe fl\bw \bf lubricating \bil ar\bund t\fe
Item 1
2
3
4
5
6
7
8
9
10
11
12

Стр. 11 из 21
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1048763&gu...procarmanuals.com
http://vnx.su