FORD SIERRA 1984 1.G CVH Engines Workshop Manual

FORD SIERRA 1984 1.G CVH Engines Workshop Manual SIERRA 1984 1.G FORD FORD https://www.carmanualsonline.info/img/11/5454/w960_5454-0.png FORD SIERRA 1984 1.G CVH Engines Workshop Manual
Trending: key battery, ABS, ground clearance, alternator, oil, belt, transmission oil

Page 1 of 24

FORD SIERRA 1984 1.G CVH Engines Workshop Manual 1.6 litre engine
Note: Unless otherwise stated, the Specifications for the 1.6 litre CVH engine are as given for the 1.8 litre (R2A type) which follow.
General 
Engine code  . . . . . . . . . . . . .

Page 2 of 24

FORD SIERRA 1984 1.G CVH Engines Workshop Manual Crankshaft
Endfloat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.09 to 0.30 mm (0.004 to 0.012 in)
Main bearing running clearance . . . . . . .

Page 3 of 24

FORD SIERRA 1984 1.G CVH Engines Workshop Manual Torque wrench settingsNmlbf ft
Main bearing cap bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 to 10066 to 74
Connecting rod (big-end bearing cap) bolts . . . . .

Page 4 of 24

FORD SIERRA 1984 1.G CVH Engines Workshop Manual Pistons and piston rings
Piston diameter:
Standard class 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79.910 to 79.920 mm
Standard class 2 . . . . . . . . . . . .

Page 5 of 24

FORD SIERRA 1984 1.G CVH Engines Workshop Manual 1.8 litre (R6A type) engine
Note: Unless otherwise stated, the Specifications for this later version of the 1.8 litre CVH engine are as given for the earlier R2A type above.
General
Engine code . . .

Page 6 of 24

FORD SIERRA 1984 1.G CVH Engines Workshop Manual a)Removal of the cylinder head
b)Removal of the camshaft
c)Removal of the timing belt and sprockets
d)Removal of the engine mountings
e)Removal of the clutch and flywheel
f)Removal of the crankshaft o

Page 7 of 24

FORD SIERRA 1984 1.G CVH Engines Workshop Manual 29Once clear of the gearbox, lift the engine
from the vehicle, taking care not to damage
the radiator fins (see illustration).
1.6 and 1.8 litre (R6A type)
30Proceed as described in paragraphs 1 to 5.

Page 8 of 24

FORD SIERRA 1984 1.G CVH Engines Workshop Manual console. Where a full-length console is fitted,
it is only necessary to remove the front tray.
3Detach the outer gaiter from the retaining
frame and withdraw it over the gear lever.
4Release the clips

Page 9 of 24

FORD SIERRA 1984 1.G CVH Engines Workshop Manual firmly in place in the transmission housing,
otherwise it could fall out resulting in fluid
spillage and possible damage. It may be
necessary to rock the units slightly to
separate them.
1.8 litre (R2

Page 10 of 24

FORD SIERRA 1984 1.G CVH Engines Workshop Manual 1.8 litre (R2A type)
Dismantling
1It is best to mount the engine on a
dismantling stand, but if this is not available,
stand the engine on a strong bench at a
comfortable working height. Failing this,
Page:   1-10 11-20 21-30 next >
Trending: check oil, oil type, transmission oil, brake sensor, sensor, checking oil, engine coolant