FORD SIERRA 1988 2.G CVH Engines Owner's Manual

FORD SIERRA 1988 2.G CVH Engines Owner's Manual SIERRA 1988 2.G FORD FORD https://www.carmanualsonline.info/img/11/5454/w960_5454-0.png FORD SIERRA 1988 2.G CVH Engines Owner's Manual
Trending: ECU, maintenance, jack points, drain bolt, bonnet, lug pattern, air filter

Page 21 of 24

FORD SIERRA 1988 2.G CVH Engines Owners Manual 6Unscrew and remove the six securing bolts,
and withdraw the oil pump over the front of
the crankshaft. Recover the gasket. 
Refitting
7Commence refitting by prising the
crankshaft front oil seal from

Page 22 of 24

FORD SIERRA 1988 2.G CVH Engines Owners Manual Refitting
6Commence refitting as follows.
7Clean the backs of the bearing shells and
the recesses in the connecting rods and big-
end caps.
8Press the bearing shells into the connecting
rods and caps

Page 23 of 24

FORD SIERRA 1988 2.G CVH Engines Owners Manual the tapered lower compression ring with the
“TOP” mark towards the top of the piston and
the gap 150º from the spreader gap, then fit
the upper compression ring with the gap 150º
on the other si

Page 24 of 24

FORD SIERRA 1988 2.G CVH Engines Owners Manual 23Check that the crankshaft rotates freely.
Some stiffness is to be expected with new
components, but there must be no tight spots
or binding.
24Check that the crankshaft endfloat is
within the specif
Page:   < prev 1-10 11-20 21-30
Trending: oil, manual transmission, belt, wheel torque, drain bolt, open gas tank, oil pressure