washer fluid FORD SIERRA 1993 2.G Reference Workshop Manual

FORD SIERRA 1993 2.G Reference Workshop Manual SIERRA 1993 2.G FORD FORD https://www.carmanualsonline.info/img/11/5460/w960_5460-0.png FORD SIERRA 1993 2.G Reference Workshop Manual

Page 4 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual Whenever servicing, repair or overhaul work
is carried out on the car or its components, it
is necessary to observe the following
procedures and instructions. This will assist in
carrying out the oper

Page 8 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual REF•8MOTtest checks
Seat belts and seats 
Note: The following checks are applicable to
all seat belts, front and rear.
MExamine the webbing of all the belts
(including rear belts if fitted) for cuts

Page 11 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual The vehicle owner who does his or her own maintenance according
to the recommended service schedules should not have to use this
section of the manual very often. Modern component reliability is such

Page 17 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual Ignition/no-charge warning light fails to come on
MWarning light bulb blown (Chapter 13).
MBroken, disconnected, or loose wiring in warning light circuit
(Chapter 13).
MAlternator faulty (Chapter 5).

Page 24 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual refitting - 2A•10, 2B•7, 2C•9
removal - 2A•8, 2B•4, 2C•6
SOHC engines- 2A•1et seq
spark plugs - 1•2, 1•14, 5•12
sump - 2A•20, 2B•15, 2C•19
timing belt/chain and sprockets - 2

Page 25 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual Pedals:
accelerator - 4A•8
brake - 10•22
clutch - 6•2
Pierburg 2V carburettor- 1•12, 4A•14
Pipes/hoses (braking system)- 10•19
Pistons- 2A•22, 2B•17, 2C•21
Plastic components- 12•3