radio FORD TAURUS 1996 User Guide

174
*
[AS12700(ALL)10/95]
q
Setting the Station Memory Preset buttons
*
[AS12850(ALL)10/95]
Your radio is equipped with 6 station
memory buttons. These buttons can be used
to select up to 6 preset AM stations and 12
FM stations (6 in FM1 and 6 in FM2).
[AS12900(ALL)02/95]
Follow the steps below to set these buttons to
the desired frequencies:
*
[AS13025(ALL)10/95]
1. Select a band, then select a frequency.
*
[AS13200(ALL)10/95]
2. Press one of the memory preset buttons and
hold the button until the sound returns. That
station is now held in memory on that
button.
*
[AS13300(ALL)10/95]
3. Follow the two steps above for each station
memory preset button you want to set.
[AS13510(ALL)04/95]
q
Using the Radio Set feature
[AS13515(ALL)04/95]
With Radio set, you can automatically set
strong stations into your memory buttons.
AM, FM1 and FM2 will be set sequentially.
[AS13545(ALL)04/95]
Turn the radio off with the ªVOL PUSH ONº
knob. Press and hold the ªSCANº button and
turn the radio on by pressing the ªVOL
PUSH ONº knob. Continue holding the
ªSCANº button until ªRADº is shown in the
display.
[AS13550(ALL)09/95]
NOTE: If there are less than six strong stations
in the frequency band, the remaining
unfilled buttons will store the last
strong station detected on the band.
*
[AS13560(ALL)10/95]
After all stations have been filled, the radio
will begin playing the station stored on
memory button 1.
File:09fcast.ex
Update:Mon Jan 22 15:58:04 1996
ProCarManuals.com

175
*
[AS13600(ALL)10/95]
Adjusting the tone balance and speaker
output of your radio
*
[AS13800(ALL)10/95]
q
Increasing or decreasing bass response
[AS13925(ALL)04/95]
Press the right (
a) side of the ªBASSº button
to increase bass (more ªlowsº); press the left
(
b) side of the ªBASSº button to decrease
bass (less ªlowsº).
*
[AS14000(ALL)10/95]
q
Increasing or decreasing treble response
[AS14125(ALL)04/95]
Press the right (
a) side of the ªTREBº
button to increase treble (more ªhighsº);
press the left (
b) side of the ªTREBº button
to decrease treble (less ªhighsº).
*
[AS14400(ALL)10/95]
q
Adjusting speaker balance
[AS14525(ALL)04/95]
Balance control allows you to adjust the
sound distribution between the right and left
speakers. Press the right (
a) side of the
ªBALº button to shift the sound to the right
speakers, and press the left (
b) side to shift
the sound to the left speakers. The display
will show ªBALº and a dot indicating the
balance position.
*
[AS14600(ALL)10/95]
q
Adjusting speaker fader
[AS14725(ALL)04/95]
Fade control allows you to adjust the sound
distribution between the front and rear
speakers. Press the right (
a) side of the
ªFADEº button to shift the sound to the front
speakers, and press the left (
b) side to shift
the sound to the rear speakers. The display
will show ªFADEº and a dot indicating the
fade position.
File:09fcast.ex
Update:Mon Jan 22 15:58:04 1996
ProCarManuals.com

176 [AS14800(ALL)04/95]Using the Power Antenna (If equipped)
*
[AS14850(ALL)02/95]
The power antenna will automatically rise when
your radio is turned on and the ignition is in the
ON or ACC position. It will lower when either
the radio or the ignition is turned off.
*
[AS14900(ALL)02/95]
Power antenna maintenance and care
*
[AS14950(ALL)02/95]
q
Never drive your vehicle through a car wash
with the power antenna mast extended. This
can cause damage to the antenna mast, which
is not covered under warranty. Turn off your
radio and/or the vehicle. This will
automatically retract the antenna.
*
[AS15000(ALL)02/95]
q
If your power antenna mast ever becomes
damaged, the mast may not extend or retract
properly which might limit reception
performance. In this case, it is not necessary
to replace the entire power antenna assembly.
A replacement mast can be obtained from
your dealership for a nominal fee.
*
[AS15050(ALL)02/95]
q
Occasionally, the power antenna mast should
be wiped clean with mild soap and water or
denatured alcohol. This prevents debris from
accumulating on the mast which can cause
excessive wear and decrease the power
antenna life. Never use petroleum-based
products to clean your antenna mast.
File:09fcast.ex
Update:Mon Jan 22 15:58:04 1996
ProCarManuals.com

177 %
*
[AS15100(ALL)08/95]
Common Radio Reception Conditions
*
[AS15150(ALL)08/95]
Several conditions prevent FM reception from
being completely clear and noise-free, such as
the following:
*
[AS15200(ALL)08/95]
1. Distance/Strength
*
[AS15250(ALL)08/95]
The strength of the FM signal is directly related
to the distance the signal must travel. The
listenable range of an average FM signal is
approximately 25 miles (40 kilometers). Beyond
this distance, the radio is operating in a fringe
area and the signal becomes weaker.
*
[AS15300(ALL)08/95]
2. Terrain
*
[AS15350(ALL)08/95]
The terrain (hilly, mountainous, tall buildings) of
the area over which the signal travels may
prevent the FM signal from being noise-free.
*
[AS15400(ALL)04/95]
3. Rounded off frequencies
*
[AS15450(ALL)08/95]
Some FM radio stations advertise a
ªrounded-offº frequency which is not the
frequency they actually broadcast on. For
example, a radio station that is assigned a
frequency of 98.7 MHz may call itself ªRadio 99º
even though 99.0 MHz is not an allowable FM
broadcast frequency.
%*
[AS15600(ALL)08/95]
Using the Controls of Your Cassette Tape
Player
[AS15700(ALL)09/95]
NOTE: Radio power must be on to use the
cassette tape player.
[AS15800(ALL)09/95]
NOTE: Adjust the volume, treble, bass, balance
and fade controls in the same manner
as for radio stations.
File:09fcast.ex
Update:Mon Jan 22 15:58:04 1996
ProCarManuals.com

178
*
[AS15900(ALL)08/95]
How to insert a tape
[AS16025(ALL)12/95]
Your cassette player is equipped with power
loading. Once you insert a tape and push
slightly (with the open edge to the right), the
loading mechanism draws the tape the rest of
the way in and play will begin after a
momentary tape tightening process. Display
indicates ªTAPEº while tape is playing. If the
ªTAPEº button is pressed when the cassette tape
player is empty, ªNOº and ªTAPEº will flash in
the display and radio play will continue.
[AS16050(ALL)09/95]
NOTE: A cassette tape can be loaded with the
ignition on whether the radio is on or
off. However, if the radio is off, the
cassette tape will be loaded and stored.
[AS16300(ALL)12/95]
How to locate a desired selection on the
tape
*
[AS16350(ALL)08/95]
There are four ways to quickly locate a desired
selection on the tape. You can use the fast
forward, rewind, ªSEEKº or ªSCANº function.
Following are brief descriptions of each.
*
[AS16400(ALL)09/95]
q
Fast forwarding the tape
[AS16525(ALL)04/95]
To fast forward the tape, press the ªFFº
button. The radio will automatically begin
playing until fast forward is manually
stopped (by pressing the ªTAPEº, ªEJº,
ªREWº or ªFFº button) or the end of the
tape is reached. The display will show a
flashing
Xto indicate fast forward.
*
[AS16535(ALL)01/95]
At the end of the tape, the direction
automatically reverses and plays the other
side of the tape.
File:09fcast.ex
Update:Mon Jan 22 15:58:04 1996
ProCarManuals.com

179
*
[AS16600(ALL)08/95]
q
Rewinding the tape
[AS16725(ALL)04/95]
To rewind the tape, press the ªREWº button.
The radio will automatically begin playing
until rewind is manually stopped (by
pressing the ªTAPEº, ªEJº, ªREWº or ªFFº
button) or the beginning of the tape is
reached. The display will show a flashing
X
to indicate rewind.
*
[AS17000(ALL)08/95]
q
Using the ªSEEKº function with your cassette
tape player
[AS17125(ALL)04/95]
While in the tape mode, press the right (
a)
side of the ªSEEKº button to seek forward to
the next selection on the tape (display
indicates ªSEEKº). Press the left (
b) side to
seek the previous tape selection.
*
[AS17135(ALL)09/95]
NOTE: If you want to restart a currently
playing tape selection, press the left
(
b) side of the ªSEEKº button after
approximately three seconds into the
current selection.
*
[AS17200(ALL)08/95]
q
Using the ªSCANº function with your
cassette tape player
[AS17325(ALL)02/95]
Press the ªSCANº button to begin the
forward scan mode on the tape currently
playing, stopping on each tape selection for
approximately an eight-second sampling
(display flashes ªSCANº).
[AS17345(ALL)04/95]
To stop the scan mode on the presently
sampled tape selection press ªSCANº a
second time.
[AS17348(ALL)02/95]
How to change the side of the tape being
played
[AS17350(ALL)02/95]
The alternate side of the tape can be selected at
any time by pressing the ªSIDE 1-2º button.
File:09fcast.ex
Update:Mon Jan 22 15:58:04 1996
ProCarManuals.com

180
*
[AS17400(ALL)08/95]
How to eject the tape
[AS17525(ALL)04/95]
To stop the tape and eject the cassette, press the
ªEJº button. The radio will resume playing if the
power is on. The tape cartridge can be ejected
with radio power (and/or ignition) on or off.
*
[AS17550(ALL)08/95]
How to store the tape
[AS17575(ALL)04/95]
Press the ªAMº or ªFMº button (or ªCDº, if
equipped) to stop the tape player and resume
radio play (or CD-DJ).
*
[AS17600(ALL)08/95]
Using the DolbyHB noise reduction feature
*
[AS17700(ALL)08/95]
NOTE: Noise reduction system manufactured
under license from Dolby Labs
Licensing Corporation. ªDolbyº and
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
*
[AS17825(ALL)04/95]
Push thekbutton to activate Dolby B Noise
Reduction. Push again to deactivate.
*
[AS18260(ALL)08/95]
Tape error messages
*
[AS18280(ALL)08/95]
Your cassette tape player is equipped to
diagnose certain problems you may experience.
Error codes are as follows:
[AS18325(ALL)04/95]
TD E1 Ð Possible problem tape cartridge. The
cassette player will automatically eject the tape.
Insert the tape again. If the same error code
appears in the display, try a different tape. If the
problem persists, refer the problem to qualified
personnel for service.
[AS18330(ALL)04/95]
TD E2 Ð Radio cannot eject tape. If tape is not
ejected when the ªEJº button is pressed, refer
the problem to qualified personnel for service.
File:09fcast.ex
Update:Mon Jan 22 15:58:04 1996
ProCarManuals.com

181 [AS18350(ALL)12/95]
TD E3 Ð Radio cannot insert tape properly. The
cassette player will automatically eject the tape.
Insert tape again. If the same error code appears
in the display, try a different tape. If the
problem persists, refer the problem to qualified
personnel for service.
*
[AS18500(ALL)08/95]
Tips on Caring for the Cassette Player and
Tapes
*
[AS18600(ALL)08/95]
In order to keep your cassette tape player
performing the way it was meant to, read and
follow these simple precautions:
*
[AS18700(ALL)08/95]
q
Using a Ford Cassette Cleaning Cartridge to
clean the tape player head after 10-12 hours
of play will help maintain the best playback
sound and proper tape operation.
*
[AS18800(ALL)08/95]
q
Only cassettes that are 90 minutes long or
less should be used. Tapes longer than 90
minutes are thinner and subject to breakage
or may jam the tape player mechanism.
*
[AS18900(ALL)08/95]
q
Protect cassettes from exposure to direct
sunlight, high humidity and extreme heat or
cold. If they are exposed to extreme
conditions, allow them to reach a moderate
temperature before playing.
*
[AS19000(ALL)08/95]
q
If a tape is loose inside the cassette, tighten it
before playing by putting your finger or a
pencil into one of the holes and turning the
hub until the tape is tight.
*
[AS19100(ALL)08/95]
q
Loose labels on cassette tapes can become
lodged in the mechanism. Remove any loose
label material before inserting cassette.
*
[AS19200(ALL)08/95]
q
Do not leave a tape in the cassette tape
player. High heat in the vehicle can cause the
cassette to warp.
File:09fcast.ex
Update:Mon Jan 22 15:58:04 1996
ProCarManuals.com

184 [AS30001(ALL)02/95]The Compact Disc Changer unit is now ready to
play using the controls of your audio system.
*
[AS30050(ALL)02/95]
How to Operate the Ford 6-CD Changer
Using the Controls on the Radio
[AS30101(ALL)02/95]
If your vehicle is equipped with the Ford 6-CD
Changer System, you can operate it through the
controls of your audio system.
*
[AS30150(ALL)05/95]
Several of the controls on the radio operate in
the same manner in CD mode as they do in
radio or cassette mode: turning the power on,
volume control and adjusting the bass, treble,
speaker balance or fade.
*
[AS30201(ALL)02/95]
How to begin CD Changer play
*
[AS30250(ALL)02/95]
NOTE: Radio power must be on to operate the
Compact Disc Changer.
[AS30301(ALL)04/95]
Push the ªCDº button to begin CD play. If the
disc magazine has just been installed, the CD
Changer will automatically begin playing the
first track (selection) of the first disc loaded in
the unit. After that, the CD Changer will start
on the disc and track where it was stopped. The
display will indicate ªCD-##º for disc number,
then display ªTR-##º for track number, then
ªDD-TTº for disc number and track number.
[AS30325(ALL)04/95]
If the CD Changer is empty, ªNOº and ªCDº
will flash in the display and radio play will
continue.
*
[AS30350(ALL)02/95]
How to change the disc being played
[AS30401(ALL)02/95]
When in the CD mode, you can change discs by
pressing the right (
a) side of the ªTUNE/DISCº
button (to select the next disc) or the left (
b)
side of the ªTUNE/DISCº button (to select the
previous disc). Play will begin on the first track
of the selected disc.
File:09fcast.ex
Update:Mon Jan 22 15:58:04 1996
ProCarManuals.com

186
*
[AS30951(ALL)02/95]
Operating the ªSCANº function
*
[AS31000(ALL)02/95]
Press the ªSCANº button to enter the scan
mode. The CD player will begin scanning the
disc, stopping on each listenable track for
approximately an eight second sampling. This
continues until you press the ªSCANº button a
second time.
*
[AS31051(ALL)02/95]
Operating the Shuffle and Scan features
simultaneously
*
[AS31101(ALL)02/95]
Both the shuffle and scan features can be
activated simultaneously. In this mode, the
player will randomly pick a selection and play
the first eight seconds. This process is continued
until either the ªSCANº button or ªSHUFFLEº
button is pressed a second time.
*
[AS31110(ALL)04/95]
Operating the CD Compression feature
*
[AS31120(ALL)04/95]
The compression feature will bring soft and loud
passages closer together for a more consistent
listening level.
[AS31130(ALL)04/95]
To turn the compression on, press the ªCOMPº
button. When the compression feature is
activated, the display will indicate ªCº. Press
again to deactivate.
*
[AS31150(ALL)02/95]
How to stop CD play
[AS31200(ALL)04/95]
While in CD Changer mode, press the ªAMº or
ªFMº button to stop CD play and resume radio
play. Loading a cassette into the cassette deck
(or pressing ªTAPEº if a cassette is already
loaded) will stop CD play and begin cassette
play.
File:09fcast.ex
Update:Mon Jan 22 15:58:04 1996
ProCarManuals.com