heating GENESIS G80 2021 Quick Reference Guide

Quick Reference Guide I 1817 I Quick Reference Guide
Rear (if equipped)
DEFOGGING / DEFROSTINGSYSTEM OFF
Pressing the OFF button
will place the system in
below settings.
• Front blower will turn off.
• Outside (fresh) air
position will be selected.
• Vented air will be at last
set temperature.
1 Driver’s temperature control
2 Passenger’s temperature control
3 Fan speed control
4 Driver’s air vent selection
5 Passenger’s air vent selection
6 AUTO (automatic control)
7 OFF (system off)
8 Front windshield defroster
9 Air intake control
10 SYNC
11 Rear window defroster
12 A/C (air conditioning)
13 Rear control
1 Fan speed control
2 Temperature control
3 OFF (system off)
4 AUTO (automatic control)
5 Mode selection
Front
1
10
9
812
7
11
4
4
632
2
5
55
13
Direction of air flow will change
depending on which vent direction arrow is selected.
MODE SELECTION
NOTE: To reduce window fogging and improve visibility, keep the interior
surface of the windshield clean by wiping it with a clean cloth and glas\
s
cleaner. In addition, position the air intake control to circulate fresh air
whenever possible while operating the vehicle.
AIR INTAKE CONTROL
Automatically controls the
modes, fan speeds, air intake
and air-conditioning functions.
AUTOMATIC HEATING /
AIR CONDITIONINGIf cabin humidity increase while
Climate Control is off, fresh air will
be circulated into the cabin.
Please refer to the Owner's Manual
for further details.
SMART VENT
CLIMATE CONTROL SYSTEM
3. Set the fan speed to the
highest speed setting.
2. Select warmest
temperature.
1. Press the front defrost button.
NOTE: Outside (fresh) air position will be
selected when front defrost button is selected.
13
FaceLevelFloorLevelFloor &Defrost
Passenger/Rear
Front
Bi-Level
When Fresh mode is
selected, air enters the
vehicle from outside and is
heated or cooled according
to the function selected.
When Recirculation mode
is selected, air from the
passenger compartment
will be recirculated through
the system and heated or
cooled according to the
function selected.
Recirculation mode
Fresh mode
NOTE: Use a microfiber towel to prevent
scratches on the climate controls while
removing fingerprints, dust, or stains.
Immediately wipe off any interior cleaning
products to prevent damage to the climate
controls.
FEATURES AND CONTROLS
GENESIS G80