turn signal GENESIS G80 2023 User Guide
[x] Cancel search | Manufacturer: GENESIS, Model Year: 2023, Model line: G80, Model: GENESIS G80 2023Pages: 661, PDF Size: 13.74 MB
Page 394 of 661
7-2
Driver Assistance System
ORG3EV071083
Forward Collision-Avoidance Assist is
designed to help detect and monitor the
vehicle ahead or help detect a pedestrian
or cyclist in the roadway and warn the
driver that a collision is imminent with
a warning message, an audible warning
and apply emergency braking.
In addition, if equipped with front corner
radars, when driving at high speeds,
Forward Collision-Avoidance Assist helps
detect vehicles in front and adjacent
lanes. If a collision is imminent when
changing lanes, Forward Collision-
Avoidance Assist will apply emergency
braking to help prevent a collision.Junction Turning functionORG3EV071295N
Junction Turning function helps avoid
a collision with an oncoming vehicle in
an adjacent lane when turning left at
a crossroad with the turn signal on by
applying emergency braking.
Junction Crossing function (if
equipped)
ORG3EV071085
Junction Crossing function helps avoid
a collision with oncoming vehicles on
the left or right side when crossing an
intersection by applying emergency
braking.
) 2 5 : $ 5 ' & 2 / / , 6 , 2 1
Page 418 of 661
7-26
Driver Assistance System
Lane Keeping Assist is designed to help
detect lane markings (or road edges)
while driving over a certain speed. Lane
Keeping Assist will warn the driver if the
vehicle leaves the lane without using the
turn signal, or will automatically assist
the driver’s steering to help prevent the
vehicle from departing the lane.
Detecting sensor
ORG3EV071074[1] : Front view camera
The front view camera is used as a
detecting sensor to detect lane markings
(or road edges).
Refer to the picture above for the
detailed location of the detecting sensor.
& $ 8 7 , 2 1
For more details on the precautions
R I W K H I U R Q W Y L H Z F D P H U D U H I H U W R
U ) R U Z D U G & R O O L V L R Q $ Y R L G D Q F H $ V V L V W
) & $ V V H F W L R Q L Q W K L V F K D S W H U
Lane Keeping Assist Settings
Setting features
ORG3EV071343AU
Lane Safety
With the vehicle on, select or deselect
S ' U L Y H U $ V V L V W D Q F H
Page 429 of 661
7-37
07
Collision warning
[ Collision warning will operate when
the turn signal is turned on in the
direction of the detected vehicle.
[ If ‘Warning Only’ is selected from the
Settings menu, the collision warning
will operate when your vehicle
approaches the lane the blind spot
vehicle is detected.
[ To warn the driver of a collision, the
warning light on the side view mirror
and head-up display (if equipped) will
blink. At the same time, an audible
warning will sound and the steering
wheel will vibrate.
[ When the turn signal is turned off or
you move away from the lane, the
collision warning will be canceled and
Blind-Spot Collision-Avoidance Assist
will return to vehicle detection state. WARNING
[ The detecting range of the rear
F R U Q H U U D G D U L V G H W H U P L Q H G E \ D
V W D Q G D U G U R D G Z L G W K W K H U H I R U H R Q
D Q D U U R Z U R D G % O L Q G 6 S R W & R O O L V L R Q
$ Y R L G D Q F H $ V V L V W P D \ G H W H F W R W K H U
Y H K L F O H V W Z R O D Q H V R Y H U D Q G Z D U Q
\ R X , Q F R Q W U D V W R Q D Z L G H U R D G
% O L Q G 6 S R W & R O O L V L R Q $ Y R L G D Q F H
$ V V L V W P D \ Q R W E H D E O H W R G H W H F W D
Y H K L F O H G U L Y L Q J L Q W K H Q H [ W O D Q H D Q G
P D \ Q R W Z D U Q \ R X
[ : K H Q W K H K D ] D U G Z D U Q L Q J I O D V K H U L V
R Q W K H F R O O L V L R Q Z D U Q L Q J E \ W K H W X U Q
V L J Q D O Z L O O Q R W R S H U D W H
Page 471 of 661
7-79
07
„Left side „Right side
ORG3EV071119ORG3EV071120
Blind-Spot View Monitor displays the
rear blind spot area of the vehicle in the
cluster when the turn signal is turned on
to help safely change lanes.
Detecting sensor
ORG3EV071036[1], [2]: Surround-side view camera
(camera located at bottom of the mirror)
Refer to the picture above for the
detailed location of the detecting
sensors.
% O L Q G 6 S R W 9 L H Z 0 R Q L W R U
Settings
Setting features
Blind-Spot View
With the vehicle on, select ‘Driver
$ V V L V W D Q F H
Page 472 of 661
7-80
Driver Assistance System
Blind-Spot View Monitor
Operating conditions
When the left or right side turn signal
turns on, the image in that direction is
displayed on the instrument cluster.
Off conditions
[ When the turn signal turns off, the
image on the instrument cluster will
turn off.
[ When the hazard warning flasher
is on, Blind-Spot View Monitor will
turn off, regardless of the turn signal
status.
[ When other important warning is
displayed on the instrument cluster,
Blind-Spot View Monitor may turn off.
% O L Q G 6 S R W 9 L H Z 0 R Q L W R U
Malfunction
When Blind-Spot View Monitor is not
working properly, or the cluster display
flickers, or the camera image does
not display properly, have the vehicle
inspected by an authorized retailer of
Genesis Brand products.
WARNING
[ 7 K H L P D J H V K R Z Q R Q W K H F O X V W H U P D \
differ from the actual distance of the
R E M H F W 0 D N H V X U H W R G L U H F W O \ F K H F N
W K H Y H K L F O H
V V X U U R X Q G L Q J V I R U V D I H W \
[ $ O Z D \ V N H H S W K H F D P H U D O H Q V F O H D Q
, I W K H O H Q V L V F R Y H U H G Z L W K I R U H L J Q
P D W H U L D O L W P D \ D G Y H U V H O \ D I I H F W
camera performance and Blind-
6 S R W 9 L H Z 0 R Q L W R U P D \ Q R W R S H U D W H
S U R S H U O \
Page 479 of 661
7-87
07
Overtaking Acceleration Assist
Overtaking Acceleration Assist operates
when the turn signal indicator is turned
on to the left while Smart Cruise Control
is operating, and the following conditions
are satisfied:
[ Your vehicle speed is above 40 mph
(60 km/h)
[ The hazard warning flasher is off
[ A vehicle is detected in front of your
vehicle
[ Deceleration is not needed to
maintain distance with the vehicle in
front
WARNING
[ When the turn signal indicator is
turned on to the left while there is
D Y H K L F O H D K H D G W K H Y H K L F O H P D \
D F F H O H U D W H W H P S R U D U L O \ 3 D \ D W W H Q W L R Q
W R W K H U R D G F R Q G L W L R Q V D W D O O W L P H V
[ 5 H J D U G O H V V R I \ R X U F R X Q W U L H V G U L Y L Q J
G L U H F W L R Q 2 Y H U W D N L Q J $ F F H O H U D W L R Q
Assist will operate when the
F R Q G L W L R Q V D U H V D W L V I L H G : K H Q
using the function in countries with
G L I I H U H Q W G U L Y L Q J G L U H F W L R Q D O Z D \ V
check the road conditions at all
W L P H V
Display and Control
Basic function
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
function.
„Operating „Temporarily canceled
ORG3EV071037NORG3EV071298N
[ When operating
(1) Whether there is a vehicle ahead
and the selected distance level are
displayed.
(2) Set speed
(3) Whether there is a vehicle ahead and
the target vehicle distance
[ When temporarily canceled
(1)
indicator
(2) The previous set speed is shaded.
(3) Whether there is a vehicle ahead (if
equipped)
Page 509 of 661
7-117
07
Highway Lane Change Assist (if
equipped)
Display and control
You can see the status of the Highway
Lane Change Assist function operation
in the Driving Assist view on the cluster.
Refer to “View Modes” section in chapter
4.
Highway Lane Change Assist function
will be displayed as below depending on
the status of the function.
„Ready/Operating „Standby/Canceled
ORG3EV071243NORG3EV071050N
(1) Highway Lane Change Assist
indicator
[ Green
on : Ready state
[ Green
blink : Operating state
[ Grey
on : Standby state
[ White
blink : Canceled state
(2) Green lane line
The green lane line is displayed when
the function starts operating, and until
the vehicle steps on the lane line.
(3) Green arrow and shade
The green arrow is displayed when a
certain amount of time has passed
after the function has started
operating, and until the lane change
has completed.
(4) Message
[ Message is displayed when the
function does not operate even
though the turn signal lever is used.
[ Message is displayed when
the function is canceled while
operating. 7 R W X U Q R Q + L J K Z D \ / D Q H & K D Q J H $ V V L V W
Highway Lane Change Assist function
will turn on when the following
conditions are satisfied.
[ The Driving Assist button or Lane
Driving Assist button is used to turn
on Highway Driving Assist.
+ L J K Z D \ / D Q H & K D Q J H $ V V L V W U H D G \ W R
operate
While Highway Lane Change Assist
function is on, the function will be
ready to operate when all the following
conditions are satisfied:
[ Highway Driving Assist is operating
[ Lane Following Assist is operating
[ A vehicle in the rear area of your
vehicle is detected more than once
after the vehicle is turned on
[ Your vehicle speed is above 50 mph
(80 km/h)
[ Hands-off warning is not displayed on
the cluster
[ Hazard warning flasher is off
Page 510 of 661
7-118
Driver Assistance System
Information
[ While Lane Change Assist function
is turned on (indicator on), Lane
Following Assist will not cancel even
if the turn signal indicator or hazard
warning flasher is operating.
[ Lane Change Assist function turns
off automatically when driven in the
following road conditions:
-One driving lane
-A road with a intersection or
crosswalk ahead
-A road with no structure, such as a
medium strip, guardrails, etc.
-There is a pedestrian or cyclist on the
road ahead
[ When the function is in the ready state,
and vehicle speed is below 35 mph (55
km/h), the function will change to the
standby state.
WARNING
: K H Q + L J K Z D \ / D Q H & K D Q J H $ V V L V W
I X Q F W L R Q W X U Q V R I I Z K L O H R S H U D W L Q J
V W H H U L Q J D V V L V W Z L O O E H W H P S R U D U L O \
F D Q F H O H G $ O Z D \ V E H F D X W L R X V Z K L O H
G U L Y L Q J
Highway Lane Change Assist operating
ORG3EV051074[1] : Center
Highway Lane Change Assist function
will operate, when you push the turn
signal lever up or down to the A or B
position while the function is in the ready
state (
indicator is green), and all of
the following conditions are satisfied:
[ The driver has his/her hand on the
steering wheel
[ There is no collision risk in the
direction of lane change
[ There is a single dotted lane line in the
direction of lane change
[ There are no Forward Collision-
Avoidance Assist and Blind Spot
Collision-Avoidance Assist warnings
[ The vehicle is driven in the middle of
the lane (should not be driving close
to one side of the lane)
[ The road you are driving on, or the
road you are about to change lane is a
road that the function can operate
Page 511 of 661
7-119
07
Information
[ Highway Lane Change Assist operates
when the turn signal lever is positioned
at A. If the turn signal lever is released
to the center (1) before stepping on
the lane, Highway Lane Change Assist
cancels. If the turn signal lever is
released to the center (1) after stepping
on the lane, Highway Lane Change
Assist changes the lane and turns off
the turn signal after lane change is
complete.
[ When the turn signal lever is placed at
B position for a certain period of time,
the green arrow will appear. At this
time, even when the lever is released
and returns to it’s original position (1),
lane change will still be assisted.
[ While lane change is being made by the
function, the turn signal indicator will
blink even when the turn signal lever is
not held, and the turn signal indicator
will turn off when lane change is
complete.
+ L J K Z D \ / D Q H & K D Q J H $ V V L V W V W D Q G E \
Highway Lane Change Assist function
will be in the standby state when one of
the ready state condition is not satisfied,
or when entering or driving on one of the
following roads:
[ Road within a certain distance from
the tollgate on the main road of the
highway
[ The road ahead ends without an
interchange or junction
[ Road with sharp curves
[ Road with narrow lanes
[ Road that is under construction
+ L J K Z D \ / D Q H & K D Q J H $ V V L V W F D Q F H O
The function will be canceled when:
[ The turn signal lever is turned on in
the opposite direction of lane change
[ The steering wheel is steered sharply
WARNING
[ : K L O H + L J K Z D \ ' U L Y L Q J $ V V L V W L V
R S H U D W L Q J W K H I X Q F W L R Q Z L O O F D Q F H O L I
one of the following occurs:
- + L J K Z D \ ' U L Y L Q J $ V V L V W L V W X U Q H G
off
-Lane Following Assist or Smart
Cruise Control is turned off or
W H P S R U D U L O \ F D Q F H O H G
- + D Q G V R I I Z D U Q L Q J P H V V D J H L V
G L V S O D \ H G R Q W K H F O X V W H U
- 7 K H W X U Q V L J Q D O O H Y H U L V S O D F H G D W $
position
- 7 K H K D ] D U G Z D U Q L Q J I O D V K H U L V
turned on
- ) R U Z D U G & R O O L V L R Q $ Y R L G D Q F H
Assist or Blind-Spot Collision-
$ Y R L G D Q F H $ V V L V W Z D U Q L Q J P H V V D J H
L V G L V S O D \ H G
- 3 R V V L E O H F R O O L V L R Q L V G H W H F W H G L Q W K H
Q H [ W O D Q H H Y H Q W K R X J K W K H U H D U H
Q R ) R U Z D U G & R O O L V L R Q $ Y R L G D Q F H
Assist and Blind Spot Collision-
$ Y R L G D Q F H $ V V L V W Z D U Q L Q J
- ( Q W H U L Q J D U R D G X Q G H U F R Q V W U X F W L R Q
-The target lane to make a lane
change disappears
-The target lane to make a lane
change is not detected
- 7 K H U H L V D S U R E O H P Z L W K W X U Q V L J Q D O
lamps
Page 563 of 661
7-171
07
Parking function operation status
[ Smart Parking function
Operation
statusTurn signal
Under controlThe turn signal of the parking direction blinks until the first reverse
is complete.
[ Smart Parking function
Operation
status 6 P D U W N H \
/ ( ' + D ] D U G
warning
lightTurn signal
Under controlGreen LED
continuously
blinks-The turn signal of the parking direction blinks
until the first reverse is complete.
PauseRed LED
continuously
blinksBlinks -
OffRed LED
illuminates
for 4 seconds
and then
turns offBlinks 3
times and
turns off-
CompleteGreen LED
illuminates
for 4 seconds
and then
turns offBlinks 1
time and
turns off-
ÃOperation status by the hazard warning light and the turn signal light may not be
applicable based on the regulation of your country
ÃIf the smart key is not within the operating range from the vehicle (approximately 13
ft. (4m)), the smart key LED will not illuminate or blink. Use the smart key within the
operating range.