display GENESIS G80 SPORT 2019 Multimedia System Manual

\broubleshooting I 5-33
Troubleshooting
\bhe current positio\hn as shown on the navigation may differ from
the actual position\h under the following conditions.
\bhe following occurrences ar\he not malfunctions \h:
•When driving on Y-shaped roads
with narrow angles the current
position may be displayed in the
opposite direction\h
•Within city streets, the current posi-
tion may be displayed on the oppo-
site side or on an\h off-road position\h
•When changing the zoom level
from maximum to a different level,
the current position may become
displayed on a different road
•If the vehicle is loaded onto a ferry
or a car transport vehicle, the cur -
rent position may become stalled
on the last positio\hn prior to loading
• When driving on a spiral-shaped
road
•When driving in mountain regions
with sharp turns or sudden brakes
•When entering a road after pa\hssing
an underground parking structure,
building parking structure, or roads
with many rotations
•When driving in heavy traffic with
frequent starts and stops
• When driving under slippery condi -
tions, such as heavy sand, snow, etc.
• When driving on spiral-shaped roads
•When the tires have recently been
replaced (Especially upon use of
spare or studless \htires).
•When using tires of\h improper size
•When the tire pressure for the 4 tires
are different
•When the replacement tire is worn or
used (Especially studless tires having
passed a second se\hason).
•When driving near high-rise buildings
•When a roof carrier has been instal\hled
•When a long distance route is calcu -
lated while driving on an expressway
In such cases, continued driving will
automatically enable the system
to conduct map matching or use
updated GPS information to provide
the current positio\hn (In such cases, up
to several minutes may be required)
Correct route guida\hnce may not occur due to\h search conditions
or driving position.
\bhe following occurrences ar\he not malfunctions \h:
• Guidance to go straight may be
given while driving on a straight
road
•Guidance may not be given even
when having turned at an inter -
section
• \bhere are certain intersections in
which guidance may not occur
•A route guidance signaling for
a u-turn may occur in some No
u-turn intersections
•\foute guidance signa\hling
entrance into a No-ent\hry zone
may occur (No-entry zone, road
under construction, etc.)
•Guidance may be given to a posi-
tion that is not the actual destina -
tion if roads to reach the actual
destination do not exist or are too
narrow
• Faulty voice guidance may be
given if the vehicle breaks away
from the designated route. (e.g. if
a turn is made at an intersection
while the navigation provided
guidance to go straight.)
\bhese situations may occur after cond\hucting route calcul\hation.
\bhe following occurrences ar\he not malfunctions \h:
•Guidance may be given to a
position differing from the current\h
position when turning at an inter-
section
•When driving in high speeds,
route recalculatio\hn may take a
longer period of time
•\foute guidance signa\hling for a
u-turn may occur in some No \h
u-turn intersections
• \foute guidance signaling entrance
into No-entry zone may occur.
(No-entry zone, road under construc-
tion, etc.)
•Guidance may be given to a position
removed from the actual destination
if roads to reach the actual destina -
tion do not exist or are too na\hrrow
• Faulty voice guidance may be given
if the vehicle breaks away from the
designated route (e.g. If a turn is
made at an intersection while the
navigation provided guidance to go
straight.)
H_DH 19MY_G5.0[USA_EU]AVN_B1MS7BD001_.indb 332018-06-29 오전 10:28:31
0505

Copyright for Brand Icon
\bhe marks of companies displayed by this product to indicate business locations are the marks of their respective owners. \bhe use of such
marks in this product \hdoes not imply any sponsorship, approval, or endorsement \hby such companies of \hthis product.
Copyright for Junction View
Junction View Data provided by ZEN\fIN USA, INC. Copyright(C) 20XX, All r\hights \feserved.
H_DH 19MY_G5.0[USA_EU]AVN_B1MS7BD001_.indb 432018-06-29 오전 10:28:31

6-6 I Voice Recognition
Voice Recognition Screen
OverviewHelp Display
NameDescription
Comman\f list
• Shows the available
comman\fs.
• Select or say a com -
man\f to \fisplay a\f\fi -
tional comman\fs in
\fetail.
How to use for
selecte\f
item This section shows how to
use voice recognition for
the selecte\f item.
How to use in
general
This section \fisplays how
to use voice recognition in
general.
Name
Description
Voice
recognition
status icons Stan\fby
Voice gui\fance
Voice comman\f process
Recognize\f results Displays the voice rec
-
ognition result.
User’s speaking
volume
being
recognize\f Displays the voice com-
man\f level real time as
it is being spoken.
HelpDisplays all available
help comman\fs in a
tree format.
Exit
En\fs the voice recogni
-
tion.
Name Description
Representative
Comman\fsDisplays frequently use\f
comman\fs.
Not
available
comman\f Unavailable voice
comman\fs are grey, a
precon\fition was not
met so the comman\f
is grey an\f unavailable.
The con\fitions require\f
for using the unavail
-
able comman\fs will be
\fescribe\f un\fer each
comman\f.
H_DH 19MY_G5.0[USA_EU]AVN_B1MS7BD001_.indb 62018-06-29 오전 10:28:37

6-8 I Voice Recognition
Voice Commands
Types of Commands
Voice recognition c\qomman\fs are classif\qie\f as “Global Comman\fs”
an\f “Local Comman\fs”.
1. Global Comman\fs (
●): Comman\fs that can be use\f imme\fi-
ately after activating voice recognition.
2. Local Comman\fs (
○): Comman\fs that can be use\f when a
multime\fia or Bluetooth function is running, or \fisplaye\f on the
screen, after acti\qvating voice recognition.
Call Commands
* Check the following before using call comm\qan\fs:
1. Voice comman\fs relate\f to phone calls can be use\f after con-
necting a Bluetooth\q \fevice.
2. To call a person, for example “Call ” whose name
is liste\f in Contacts, you must first \fownloa\f the Contacts list.
For \fetails on \fownloa\fing contacts, see “Part 3. Bluetooth >
Chapter 3. Bluetooth Phone > \q3-10 Contacts”.
3. After \fownloa\fing the Bluetooth contacts, it will take some time
to convert the Contacts into voice \fata \furing which time you
cannot make a call by name yet. The time it takes to convert
voice \fata may vary \fepen\fing on the number of Contacts
\fownloa\fe\f on the phon\qe.
Comman\f Operation
●CallDisplays \fownloa\fe\f Contacts, after this
you can make a call by saying the name.
●Call You can \firectly call a person by
in the \fownloa\fe\f Contacts.
●Call on
MobileYou can call a
person \firectly to
the number that is save\f as “Mobile” in the
\fownloa\fe\f Contacts.
e.g.) Call “John Smith” on Mobile
●Call at
Work You can call a person \firectly to
the number that is save\f as “Work” in the
\fownloa\fe\f Contacts.
e.g.) Call “John Smith” at Work
●Call at
HomeYou can call a
person \firectly to
the number that is save\f as “Home” in the
\fownloa\fe\f Contacts.
e.g.) Call “John Smith” at Home
●Call on
Other You can call a
person \firectly to
the number that is save\f as “Other” than
“Mobile, Home, or Work” in the \fown -
loa\fe\f Contacts.
e.g.) Call “John Smith” on Other
●Dial Number Displays a screen where you can say a
phone number to \fial.
●Dial You can \firectly say the number to call.
e.g.) Dial 111 555 1\q234
H_DH 19MY_G5.0[USA_EU]AVN_B1MS7BD001_.indb 82018-06-29 오전 10:28:38

6-10 I Voice Recognition
Comman\fOperation
 Fin\f A\f\fress>
• You can search for a \fesignate\f POI
name or a\f\fress via the network service.

e.g.) Fin\f “Starbucks”, Fin\f “Starbucks” in
Seattle
• If ‘Use Network’ is selecte\f in the Voice
recognition menu, a Genesis Connecte\f
Services subscription is require\f to use the
POI search feature.
• If ‘Use Network’ is not checke\f the
Navigation system will use the on-boar\f
map \fatabase on the\q SD MAP Car\f.
 Fin\f A\f\fress in

• Fin\fs the a\f\fress in \q an\f sets it\q as
the \festination.
e.g.) Fin\f A\f\fress in \qCalifornia
• To fin\f an a\f\fress, you shoul\f say “House
Number
→
Street →
City”
e.g.) 300 (Three Ze\qro Zero) Main Stree\qt,
Almon\f
Comman\f Operation
 Fin\f
Imme\fiately fin\fs . For \fetail of ,
see “Fin\f ” List.
e.g.) Fin\f “Banks”
 Frequently
Visite\f Points You can select a location from the list of your
frequently visite\f points. Say the number of
the location you want.
 A\f\fress Book Access the a\f\fress \qbook screen.
 Previous Points Displays a list combining Previous
Destinations, Frequently Visite\f Points, an\f
Previous Starting Points all together.
You can then set a \festination by saying the
list number.
 Previous
Destinations Displays a list of recent \festinations that you
can return to by saying the number in the list.
 Previous
Starting Points Displays a list of recent starting points that
you can return to by saying the number in the
list.
 Traffic
Information Moves to the Traffic Information menu screen.
 Go Home Set the \festination\q to your home.
Your home must first be set in the Navigation
system.
Information
• Shoul\f promote the server base\f system better, by informing the user
there is improve\f speech recogniti\qon, larger \fatabase\q content.
H_DH 19MY_G5.0[USA_EU]AVN_B1MS7BD001_.indb 102018-06-29 오전 10:28:38

Voice Comman\fs I 6-1\q1
Comman\fOperation
 Go to Work Set the \festination\q to your work\boffice.
Your work\boffice must first be set in the
Navigation system.
 Change Home You can change the location save\f as your
home.
 Change Work You can change the location save\f as your
work.
 Pause Route Pause the navigation gui\fance.
 Resume Route Resume the navigation gui\fance.
 Turn Gui\fance
On Turns on the voice gui\fance syste\qm.
 Turn Gui\fance
Off Turns off the voice gui\fance syste\qm.
 Zoom In Zooms in on the na\qvigation map.
 Zoom Out Zooms out from the\q navigation map.
 Cancel Route Cancels the route to the fixe\f \festination
an\f exits gui\fance.Comman\f
Operation
 Destination
Information Tells you the remaining \fistance an\f time to
your \festination.
 Route Options Moves to the Route Op\qtions menu screen.
 Emergency
Services Displays a list of nearest Police Station,
Hospital, Dealershi\qp, or Roa\f Assistanc\qe.
You can then set a \festination by saying the
list number.
 Police Stations Displays a list of the ne\qarest police statio\qns.
You can then set a \festination by saying the
list number.
 Hospitals Displays a list of the ne\qarest hospitals.
You can then set a \festination by saying the
list number.
 Dealerships Displays a list of the ne\qarest car \fealershi\qps.
You can then set a \festination by saying the
list number.
 Roa\fsi\fe
Assistance Displays a list of the nearest roa\f assistance
locations.
You can then set a \festination by saying the
list number.
 Show Route Displays a map overview of the entire route
to your \festination.
H_DH 19MY_G5.0[USA_EU]AVN_B1MS7BD001_.indb 112018-06-29 오전 10:28:38
06

8-\f I Other \beatures8-\f I Other \beatures
Climate
Press the CLIMATE key for the climate system to see status infor-
mation in the full \-screen display.
When multimedia is in use, the climate system information will be
displayed over the top when you control the temperature (TEMP)
or turn on the air condit\-ioning (A/C).
Name Description
Set the
temperature of
the driver's seat
and passenger
seats Displays the configured temperature settings
for the driver's seat and the passenger seats.
Cooling or heating will continue until the tem-
perature matches the configured temperature
settings.
The interior temperature is isplayed in units of 1 °\b.
Air directionDisplays the configured a\-ir direction setti\-ngs.
Air volumeDisplays the configured a\-ir volume settings.
Cooling/ heating
control status
(AUTO) Displayed when the
AUTO
key is pressed
and cooling/heating operates automatically
according to the configured temperature set -
tings.
AUTO will be turned off when you try to
do the following with AUTO on: - Control the air \-volume
- Control the air \-direction
- Turn the air condition\-ing (A/C) on/off
- Turn on the moisture removal function
for the windscreen
Air conditioning
control status Displayed when the A/C key is pressed
and the air conditi\-oning starts cooling/heating.
Other Features
H_DH 19MY_G5.0[USA_EU]AVN_B1MS7BD001_.indb 22018-06-29 오전 10:28:40

Climate I 8-3
NameDescription
Simultaneous temperature
settings for the
driver's seat and
the passenger
seats (SYNC)Displayed when the SYNC key is pressed
and the temperatures of the driver's seat and
the passenger seats can be configured at the
same time.
Outside Temperature Displays the current temperature outside the
vehicle.
Settings
Goes to the Climate Settings screen.Smart
Ventilation, Auto-Defog System and Rear
Climate Control ca\-n be turned on and off.
Alert for
excessive
amount of
internal CO
\f
Displayed when a high level of internal CO\f is
detected as this could cause a feeling of driver
fatigue. Ventilate the internal air.
H_DH 19MY_G5.0[USA_EU]AVN_B1MS7BD001_.indb 32018-06-29 오전 10:28:41
08

8-4 I Other \beatures
Camera
WARNING
When backing up, make sure to follow the guidelines be\-low:
• Before entering your vehicle, always check the area behind your
vehicle.
• Do not solely rely on the rear view camera when backing up. Always
ensure that it is safe to back up by checking behind you and looking
in the rearview mirrors.
• Always back up slowly and stop immediately if you suspect that a person,
especially a child,\- might be behind you.
CAUTION
• The distance shown in the rear view screen may differ from the actual
distance. \bor safety, be sure to visually check the rear, left, and right sides
of your vehicle.
• The color of the parking guidelines displayed in the picture may differ
from the actual scr\-een.
• When booted up, blinking may occur when you switch to a UI scree\-n.
NOTICE
•The rear view screen remains active while you are backing up. When
you move the transmission shift lever to any position other than
the "R" (Reverse) position after backing up, the rear view screen
will be deactivated and the system will display the previous screen
automatically.
•As you steer your vehicle, the parking guides change accordingly to
indicate your vehicle's path.
•Depending on vehicle models, the steering-interactive parking guides
may not be supported.
•If an object comes too close to your vehicle as you are parking the
vehicle, a warning beep will sound. To prevent an accident that might
result if you do not hear the \-beep, you can set the syst\-em to decrease the \-
volume level of any media playing automatically when you are parking
the vehicle. On the Home screen, touch All Menus
▶ Setup ▶ Sound ▶
Priority
▶ Proximity Warning.
H_DH 19MY_G5.0[USA_EU]AVN_B1MS7BD001_.indb 42018-06-29 오전 10:28:41

Navigation Settings \BSound Settings
Display Settings
Bluetoot\f Settings \B
Connected Settings \B
P\fone P\bojection Sett\Bings
Voice Recognition Se\Bttings Date/Time Settings\B Language Settings Keyboa\bd Settings
Sc\been Save\b Settings Advanced Settings System Info
part.9 Setup
H_DH 19MY_G5.0[USA_EU]AVN_B1MS7BD001_.indb 12018-06-29 오전 10:28:42