infotainment GENESIS G90 2023 Owner's Manual
[x] Cancel search | Manufacturer: GENESIS, Model Year: 2023, Model line: G90, Model: GENESIS G90 2023Pages: 676, PDF Size: 14.16 MB
Page 130 of 676
4-20
Instrument Cluster, Armrest touchscreen, Infotainment system
Low beam indicator light
This indicator light illuminates:
When the headlights are on.
Light ON indicator light
This indicator light illuminates:
When the parking lamps or headlights
are on.
High Beam Assist indicator
light
This indicator light illuminates:
When the high-beam is on with the light
switch in the AUTO position.
• White: When High Beam Assist is
ready to operate.
• Green: When High Beam Assist is
operating.
If your vehicle detects oncoming or
preceding vehicles, High Beam Assist
will switch the high beam to low beam
automatically.
For more details, refer to “High Beam
Assist (HBA)” section in chapter 5.
AUTO HOLD indicator light
This indicator light illuminates:
• White: When you activate Auto Hold
by pressing the AUTO HOLD switch.
• Green: When you stop the vehicle
completely by depressing the brake
pedal with Auto Hold activated.
• Yellow: Whenever there is a
malfunction with the Auto Hold
function.
If this occurs, have the vehicle inspected
by an authorized retailer of Genesis
Branded products.
For more details, refer to “Electronic
Parking Brake (EPB)” section in chapter
6.
004_RS4_HMA.indd 4-202022-04-06 3:02:32
Page 132 of 676
4-22
Instrument Cluster, Armrest touchscreen, Infotainment system
Press START button with key
(if equipped)
This message is displayed if you press
the Engine Start/Stop button while the
warning message “Key not detected” is
displayed.
At this time, the immobilizer indicator
light blinks.
Check BRAKE SWITCH fuse
This message is displayed if the brake
switch fuse is disconnected.
You need to replace the fuse with a new
one before starting the engine.
If that is not possible, you can start the
engine by pressing the Engine Start/
Stop button for 10 seconds in the ACC
position.
Shift to P or N to start engine
This message is displayed if you try to
start the engine in any other position
except P (Park) or N (Neutral).
Information
You can start the engine with the gear
in N (Neutral). But, for your safety, we
recommend that you start the engine with
the gear shifted to P (Park).
Battery discharging due to external
electrical devices (if equipped)
This message is displayed if the 12V
battery voltage is weak due to any
non-factory electrical accessories (ex.
dashboard camera) while parking. Be
careful that the battery is not discharged.
If the message appears after removing
the non-factory electrical accessories,
have the vehicle inspected by an
authorized retailer of Genesis Branded
products.
Check rear wheel steering system
(if equipped)
This message is displayed if the rear
wheel steering system or related
devices is not working properly. Also,
The warning light will illuminate on the
cluster. If the message appares after
engine is restarted, have the vehicle
inspected by an authorized retailer of
Genesis Branded products.
004_RS4_HMA.indd 4-222022-04-06 3:02:32
Page 134 of 676
4-24
Instrument Cluster, Armrest touchscreen, Infotainment system
Lights
OJWEV041023LOJWEV041023L
This indicator displays which exterior
light is selected using the lighting
control.
You can activate or deactivate Wiper/
Lights display function from the Settings
menu in the infotainment system screen.
Select:
-Setup Ÿ Vehicle Ÿ Cluster Ÿ Content
Selection Ÿ Wiper/Lights Display
See additional information in supplied
Infotainment Manual.
Wiper
OJX1049008LOJX1049008L
This indicator displays which wiper speed
is selected using the wiper control.
You can activate or deactivate Wiper/
Lights display function from the Settings
menu in the infotainment system screen.
Select:
-Setup Ÿ Vehicle Ÿ Cluster Ÿ Content
Selection Ÿ Wiper/Lights Display
See additional information in supplied
Infotainment Manual.
004_RS4_HMA.indd 4-242022-04-06 3:02:33
Page 136 of 676
4-26
Instrument Cluster, Armrest touchscreen, Infotainment system
The LCD display modes can be changed by using the control switches.
Switch Operation Function
APress MODE button for changing gauge mode
B
PressSELECT/RESET switch for selecting pop up
SELECT/RESET switch for entering or exiting widget
navigation mode
Press and holdSELECT/RESET switch for selecting certain pop up
SELECT/RESET switch for hiding or showing widget
mode
Press 3 timesSELECT/RESET switch for resetting the selected Normal
view mode
Tap up, down,
left, right When in widget mode, the switch is used to navigate the
widgets.
When not in widget mode, the switch is used to change
to previous or next song.
C, Press UP, DOWN switch for changing View modes
View Modes
View modes Explanation
Driving Assist viewDriving Assist view displays the status of the vehicle’s Driver
Assistance systems
Map view Show map and navigation related information
Normal viewShow trip computer or widget on center without background
information
The information provided may differ depending on which functions are applicable
to your vehicle.
LCD Display Control
ORS041018ORS041018ORS041017 ORS041017
LCD DISPLAY
004_RS4_HMA.indd 4-262022-04-06 3:02:33
Page 138 of 676
4-28
Instrument Cluster, Armrest touchscreen, Infotainment system
ORS042028NORS042028N
Accumulated info
Accumulated trip distance, average fuel
economy, and total driving time are
displayed.
The information is accumulated starting
from the last reset.
To manually reset the information,
press the
button three times on the
steering wheel when Accumulated Info is
displayed. The trip distance, the average
fuel economy, and total driving time will
reset simultaneously.
ORS041031LORS041031L
Auto stop (if equipped)
AUTO STOP display shows the elapsed
time of engine stop by Idle Stop and Go
system.
To manually reset the information, press
the
button three times on the steering
wheel when ‘AUTO STOP’ is displayed.
For more details, refer to “Idle Stop and
Go (ISG)” section in chapter 6.
ORS041032LORS041032L
Tire pressure
The tire pressure of each tire is displayed.
For more details, refer to “Tire Pressure
Monitoring System (TPMS)” section in
chapter 8.
ORS041030LORS041030L
Driving force distribution (if equipped)The distribution status of the driving
power of the front and rear wheels are
displayed when Auto 4WD mode is
activated.
For more details, refer to "Four Wheel
Drive (4WD)" section in chapter 6.
004_RS4_HMA.indd 4-282022-04-06 3:02:34
Page 139 of 676
4-29
04
ARMREST TOUCHSCREEN
The armrest touchscreen on the rear
seat allows occupants to access various
functions of the vehicle. Tap the screen
twice quickly to start.
Information
Functions available from the armrest
touchscreen may vary depending on
vehicle specifications.
Operating the touchscreen
Press the button on the upper left or
right of the screen to either: display
home screen, lock or turn off the screen.
ORS031106LORS031106L
ORS031107LORS031107L
1. Home: Returns to the home screen.
2. LOCK: Locks the rear armrest touch
screen and infotainment system
controller to disable its operation.
Press LOCK again to unlock. Only the
POWER button can be operated while
locked.3. POWER: Turns off the touchscreen.
The touchscreen automatically turns
off if there are no movements in the
screen for 2 minutes. You can change
the settings from the display menu.
Using Touchscreen Functions
To use convenience functions, press the
menus from the home screen or the left
side menu of the touchscreen.
4. Climate: Heater and air conditioner
can be operated from the rear seat.
For more details, refer to “Automatic
Climate Control System” section in
chapter 5 or “Seat warmers”, “Air
ventilation seats” section in chapter 3.
5. Seat: Adjusts seat positions and
operates convenience functions
equipped on the rear seat. For more
details, refer to “Rear seats” section in
chapter 3.
6. Massage (if equipped): Operates
body massage functions. For more
details, refer to “Rear seats” section in
chapter 3.
7. Shades: Operates powered sunshades
for the rear seats. For more details,
refer to “Panorama sunroof”, “Rear
side window sunshades” and “Rear
window sunshade” section in chapter
5.
8. Lights: Turns on or off the indoor
lighting. Adjusts the color temperature
and brightness of the lighting. For
more details, refer to “Interior lights”
section in chapter 5.
9. Setup: Access to other functions
or changes the setting of the
touchscreen. For more details, refer to
“Setting touchscreen” section in this
chapter.
004_RS4_HMA.indd 4-292022-04-06 3:02:35
Page 140 of 676
4-30
Instrument Cluster, Armrest touchscreen, Infotainment system
Setting Touchscreen
Press Setup from the main menu of the
touchscreen.
Settings for other functions can be
accessed on the left side of the Setup
(
) menu.
• Fragrance (if equipped): Select the
fragrance for pleasant riding. For more
details, refer to “Built in diffuser”
section in chapter 5.
• Seat (if equipped): Select different
seat modes for rear right seat
occupant. For more details, refer to
“Seats” section in chapter 3.
• Rear Wireless Charging (if equipped):
Turn on/off the wireless cellphone
charge function for rear seat
occupants. For more details, refer
to “Wireless smart phone charging
system” section in chapter 5.
• Display: Change the screensaver
timeout setting and screen display
method while using massage buttons
from the rear door.
-Screen Time-out: 15 sec, 30 sec, 1
Min, 2 Min (default),5 Min, 10 Min
-Massage Notification/Status
(if equipped): Massage Screen
(default), Pop-up, OFF
• Graphic Themes: Select the display
theme of the screen.
-Use Audio System's Display Theme
(default)
-User-Set Time : Select between
white and black theme, or set the
screen to change automatically to
white theme during the day and
black during the night. • Illumination: Select the brightness of
the screen.
-Adjust Brightness Automatically:
The brightness of the display is
automatically adjusted depending
on outside brightness.
-Manual adjustment: Manually adjust
the brightness to desired level.
Brightness is maintained at the
adjusted level.
-Reset: Returns all settings to
default.
• Blue Light Filter: Select whether to
turn the blue light filter on or off, and
set the color when the blue light lifter
is on.
-Use Blue light filter/color
adjustment: Select or deselect
whether to use the blue light filter,
and adjusts the display color when
the blue light filter is on.
-Auto: Adjusted blue light filter is
turned on automatically when the
surrounding area is dark.
-User-Set Time: Adjusted blue light
filter turns on at the time set.
004_RS4_HMA.indd 4-302022-04-06 3:02:36
Page 141 of 676
4-31
04
VEHICLE SETTINGS íINFOTAINMENT SYSTEMî
ORS041020LORS041020L
Vehicle Settings in the infotainment
system provides user options for a
variety of settings including door lock/
unlock features, convenience features,
driver assistance settings, etc.
Vehicle Settings menu
-Driver Assistance
-Drive Mode
-Active Sound Design
-Head-Up Display
-Cluster
-Climate
-Seat
-Lights
-Door
-Digital key
-Convenience
The information provided may differ
depending on which functions are
applicable to your vehicle.
WARNING
Do not operate the Vehicle Settings
while driving. This may cause
distraction resulting in an accident.
Setting Your Vehicle
ORS041019ORS041019
1. Press the SETUP button on the head
unit of the infotainment system.
ORS041033LORS041033L
2. Select ‘Vehicle’ to change the Vehicle
Settings.
ORS041034LORS041034L
See additional information in supplied
Infotainment Manual.
004_RS4_HMA.indd 4-312022-04-06 3:02:36
Page 146 of 676
5
Infotainment system ......................................................................................5-166USB-C Port ................................................................................................................ 5-166
Antenna ......................................................................................................................5-167
Steering Wheel Remote Controls .............................................................................5-167
Infotainment System ................................................................................................ 5-168
Voice Recognition .................................................................................................... 5-168
Bluetooth® Wireless Technology ............................................................................. 5-169
Bang & Olufsen Sound System ................................................................................ 5-169
5. Convenience Features
Page 148 of 676
5-7
05
Information
[ The side view mirror will fold if
‘Enable on Door Unlock’ is selected
from the Settings menu in the
infotainment system screen. Select:
- 6 H W X S : 9 H K L F O H : & R Q Y H Q L H Q F H :
: H O F R P H 0 L U U R U / L J K W : 2 Q G R R U
unlock
[ The door handle touch sensor will only
operate when the smart key is within
28~40 in. (0.7~1 m) from the outside
door handle.
[ Note that you cannot lock your vehicle
using the door handle touch sensor if
any of the following occur:
-The Smart Key is in the vehicle.
-The Engine Start/Stop button is from
$ & & R U 2 1 S R V L W L R Q
-Any of the doors are open except for
the trunk.
WARNING
Do not leave the Smart Key in your
vehicle with unsupervised children.
Unattended children could press the
Engine Start/Stop button and may
operate power windows, lock the doors
or other controls, or even make the
vehicle move, which could result in
serious injury or death.
Unlocking your vehicle (When the
Two Press Unlock feature is off)
ORS051006
To unlock your vehicle using the door
handle touch sensor or the Smart Key:
1. Make sure you have the smart key in
your possession.
2. Touch the door lock/unlock sensor on
the door handle (the engraved part)
or press the Door Unlock button N on
the smart key.
3. When all doors unlock, door handles
will pop out and the hazard warning
lights will blink two times.