start stop button GENESIS G90 2023 Owners Manual

2-6
Vehicle Information, Consumer Information and Reporting Safety Defects
1. Instrument cluster .................................. 4-4
2. Horn ........................................................5-57
3. Driver’s front air bag ............................. 3-59
4. Engine Start/Stop button ....................... 6-5
5. Infotainment system ...........................5-168
6. Hazard warning flasher button .............. 8-2
7. Automatic climate control system ...... 5-121
8. Passenger’s front air bag ..................... 3-59
9. Glove box ............................................. 5-152
10. Rotary shifter (Rotary gear shift dial) ....6-11
11. Infotainment system controller ..........5-16812. Wireless charging system pad ............ 5-158
13. Wireless charging system indicator ... 5-158
14. Seat Warmer/ ........................................ 3-33
Air ventilation seat ................................ 3-36
15. Parking/View button ............................ 7-118
16. Drive mode button ................................6-61
17. Parking Safety button .......................... 7-134
18. Door close button .................................. 5-41
19. USB port ...............................................5-166
20. USB charger ......................................... 5-157
21. Power outlet ......................................... 5-156
The actual shape may differ from the illustration.
ORS011004
,167580(173$1(/29(59,(:

3-13
03
Seat massage function (for driver’s
seat) (if equipped)
ORS031016
Use the massage function to relax after
a long drive, or when resting inside the
vehicle.
1. While the Engine Start/Stop button is
in ‘ON’ position, press the massage
button on the driver’s seat door to
start the function.

[The light indicating massage
intensity level illuminates.
2. Press the button again to set the
intensity level.

[Each time you press the button, the
intensity setting of the Massage it is
changed as follows:
+LJK

3-19
03
NOTICE

[Do not press the Relax (REST) mode
switch again while operating the
seat positions for Relax (REST)
mode. It may abruptly stop the seat
movement.

[When you operate the seat control
switch while adjusting the seat
positions for the Relax (REST) mode,
it stops the automatic seat position
adjustment. In this case, manually
adjust the seat positions.

[Any items, which occupy the front
passenger's seat, may get damaged
while automatically adjusting the
seat positions for the Relax (REST)
mode. Do not put any items on the
front passenger's seat.
Information

[Relax (REST) mode switches for
adjusting the front passenger’s seat do
not operate in the following situations
when:
-The Engine Start/Stop button is in
the OFF position.
-A passenger occupies the front
passenger’s seat.
-An item occupies the front
passenger’s seat.
-The front passenger’s door is open.
-The front passenger’s seatbelt is
fastened.

[Relax (REST) mode for rear left seat
is unavailable under the following
circumstances when:
-The driver’s seat is positioned back
too far.
-The driver’s seatback is reclined
back too much.

[Operating range of the Relax (REST)
mode of the rear left seat may vary
depending on the position of the
driver’s seat.
Information

[The seat position changes to Relax
(REST) mode while the button M is
pressed. The seat stops moving when
the button M is released.

[The forward and rearward position for
the rear seats are adjusted based on its
current position. The starting position
may differ.

[Operating the seat control switch while
the seat is being adjusted for Relax
(REST) mode stops the seats from
moving.
To adjust the seats again, use the
control switch and adjust manually.

3-21
03
Information
Return function switch for adjusting the
front passenger's seat do not operate in
the following situations when:

[The Engine Start/Stop button is in the
OFF position.

[A passenger occupies the front
passenger's seat.

[An item occupies the front passenger's
seat.

[The front passenger's door is open.

[The front passenger's seatbelt is
fastened.
Information

[The seat position changes to Return
mode while the button O is pressed.
The seat stops moving when the button
O is released.

[Operating the seat control switch while
the seat is being adjusted for Return
mode stops the seats from moving.
To adjust the seats again, use the
control switch and adjust manually.
Calf support adjustment (if equipped)
ORS031027
ORS032155N
Place your leg on the calf support and
adjust its angle to relax.

[Control switch (Type A)
Slide the calf support switch
diagonally upward or downward to
adjust the angle.

[Armrest touchscreen (Type B)
1. Press
from the left side menu
on the armrest touchscreen.
- Seat adjustment screen is
displayed.
2. Press the adjustment button on
the lower part of the rear seat to
be adjusted, and select the calf
support function.
3. Press the arrows of the desired
direction to adjust the angle of the
calf support.

3-22
Safety System
Information
Opening the door will return the calf
support to its original position.
CAUTION
Do not sit or place heavy objects on the
calf support. It may damage the system.
WARNING

[When lowering or raising the calf
support, be careful not to have your
hands or legs caught under the front
seats or other surrounding parts of
the calf support. Unexpected injuries
may occur.

[Do not allow children to adjust the
switch. Unexpected injuries may
occur.

[Make sure that the footrest and calf
support do not interfere with each
other while adjusting. The body parts
or objects may be damaged if it is
caught in the interference.
Rear seat massage function (if
equipped)
Use massage seat to relax after a long
drive, or when resting inside the vehicle.
ORS031033
Massage button
1. While the Engine Start/Stop button is
in ‘ON’ position, press the massage
button on the rear passenger seat
door to start the function.

[The light indicating massage
intensity level illuminates, and the
massage function will start.
2. Press the button again to set the
intensity level.

[Each time you press the button, the
intensity setting of the Massage is
changed as follows:
+LJK

3-40
Safety System
Seat Belt Warning Light
Front seat belt warning
ORS031046
As a reminder to the driver and front
passenger, the seat belt warning light will
illuminate for approximately 6 seconds
each time the Engine Start/Stop button
is in the ON position regardless of belt
fastening.
If the seat belt is not fastened, the
warning chime will sound for about 6
seconds and the waning light will stay
ON until the seat belt is fastened.
If the seat belt is not fastened, when
vehicle speed is between 5.5 mph (9
km/h) and 12 mph (20 km/h) the warning
light will continue to illuminate and
warning chime will sound until the seat
belt is fastened.
If the seat belt is not fastened, when
vehicle speed is above 12 mph (20 km/h),
the warning light will blink and warning
chime will sound for approximately 100
seconds. (warning chime will sound in
three stages)
WARNING
Riding in an improper position
adversely affects the front passenger’s
seat belt warning system. It is important
for the driver to instruct the passenger
to be seated properly as instructed in
this manual.
Information

[Although the front passenger seat is not
occupied, the seat belt warning light
will blink or illuminate for 6 seconds.

[The front passenger’s seat belt warning
may operate when luggage is placed on
the front passenger seat.

3-45
03
NOTICE
The sensor that activates the SRS
control module is connected with the
pre–tensioner seat belts. The SRS air
bag warning light on the instrument
cluster will illuminate for approximately
three to six seconds after the Engine
Start/Stop button is in the ON position,
and then it should turn off.
If the pre-tensioner is not working
properly, the warning light will
illuminate even if the SRS air bag is not
malfunctioning. If the warning light
does not illuminate, stays illuminated
or illuminates when the vehicle is being
driven, have the pre-tensioner seat
belts and/or SRS control module be
inspected by an authorized retailer of
Genesis Branded products as soon as
possible.
Information

[Pre-tensioner seat belts may be
activated in certain frontal or side
collisions or rollover situations.

[When the pre-tensioner seat belts are
activated, a loud noise may be heard
and fine dust, which may appear to be
smoke, may be visible in the passenger
compartment. These are normal
operating conditions and are not
hazardous.

[Although it is non-toxic, the fine dust
may cause skin irritation and should
not be inhaled for prolonged periods.
Wash all exposed skin areas thoroughly
after an accident in which the pre-
tensioner seat belts were activated.
WARNING

[Fasten your seat belt while sitting
properly in an upright position to
maximize the effectiveness of the
pre-tensioner seat belt system.

[A pre-tensioner seat belt system
is designed to activate only once.
Replace the pre-tensioner seat belt
system, if it was activated in an
accident.
Pre-Active Seat Belt (PSB)
(if equipped)
The purpose of the Pre-Active Seat Belt is
to tighten the seat belt when a collision
is sensed, during emergency braking, or
when a loss of control is sensed.
NOTICE
Pre-Active Seat Belt is a supplementary
system. Pre-Active Seat Belt activates
only when the passenger is wearing his/
her seat belt.
Pre-Active Seat Belt operation
In order to maximize the safety of the
passenger, Pre-Active Seat Belt system
operates as below.

[Full retraction
The seat belt is tightened when:
- Emergency braking situation occurs
- Losing control of the vehicle
- The vehicle senses a collision
- Driving on a slippery frozen road
- Unstable rolling of the vehicle
occurs

[Slack removal
Tightens a lose seat belt when
the seatbelt is fastened.

[Belt parking
Tightens a loose seat belt when the
seat belt is unfastened.

3-61
03
WARNING
To reduce the risk of serious injury or
death from an inflating side air bag
and front center side air bag, take the
following precautions:

[Seat belts must be worn at all times
to help keep occupants positioned
properly.

[Do not allow passengers to lean their
heads or bodies onto doors, put their
arms on the doors, stretch their arms
out of the window, or place objects
between the doors and seats.

[Hold the steering wheel at the 9
o’clock and 3 o’clock positions, to
minimize the risk of injuries to your
hands and arms.

[Do not use any accessory seat
covers. This could reduce or prevent
the effectiveness of the system.

[Do not hang other objects except
clothes. In an accident it may cause
vehicle damage or personal injury
especially when air bag is inflated.
[Do not place any objects over the
air bag or between the air bag and
yourself. Also, do not attach any
objects around the area the air bag
inflates such as the door, side door
glass, front and rear pillar.

[Do not place any objects between
the door and the seat. They may
become dangerous projectiles if the
side air bag inflates.

[Do not install any accessories on the
side or near the side air bags.

[Do not cause impact to the doors
when the Engine Start/Stop button
is in the ON or START position as this
may cause the side air bags to inflate.

[If the seat or seat cover is damaged,
have the system serviced by an
authorized retailer of Genesis
Branded products.

3-63
03
How Does the Air Bags System
Operate?
ORS032054N
The SRS consists of the following
components:
M Driver’s front air bag module
N Passenger’s front air bag module
O Front center side air bag module
P Side air bag modules
Q Curtain air bag modules
R Front retractor pre-tensioner
S Air bag warning light
T SRS control module (SRSCM) /
Rollover sensor
U Front impact sensors
V Side impact sensors
Side pressure sensors
Driver’s knee air bag module
Driver’s and front passenger’s seat belt
buckle sensors
Rear retractor pre-tensioner (if
equipped)
Occupant classification systemThe SRSCM (Supplemental Restraint
System Control Module) continually
monitors all SRS components while
the Engine Start/Stop button is ON to
determine if a crash impact is severe
enough to require air bag deployment or
pre-tensioner seat belt deployment.
SRS warning light
The SRS (Supplemental Restraint System)
air bag warning light on the instrument
panel displays the air bag symbol
depicted in the illustration. The system
checks the air bag electrical system for
malfunctions. The light indicates that
there is a potential problem with your air
bag system, which could include your
side and/or curtain air bags used for
rollover protection.

3-64
Safety System
WARNING
If your SRS malfunctions, the air bag
may not inflate properly during an
accident, increasing the risk of serious
injury or death.
If any of the following conditions occur,
your SRS is malfunctioning:

[The light does not turn on for
approximately three to six seconds
when the Engine Start/Stop button is
in the ON position.

[The light stays on after illuminating
for approximately three to six
seconds.

[The light comes on while the vehicle
is in motion.

[The light blinks when the engine is
running.
Have an authorized retailer of Genesis
Branded products inspect the SRS
as soon as possible if any of these
conditions occur.
During a moderate to severe frontal
collision, sensors will detect the
vehicle’s rapid deceleration. If the rate of
deceleration is high enough, the control
unit will inflate the front air bags, at the
time and with the force needed.
The front air bags help protect the driver
and front passenger by responding to
frontal impacts in which seat belts alone
cannot provide adequate restraint. When
needed, the side air bags help provide
protection in the event of a side impact
or rollover by supporting the side upper
body area.
[Air bags are activated (able to inflate
if necessary) only when the Engine
Start/Stop button is in the ON or
START position and it can be activated
within about 3 minutes after the
engine is turned off.

[Air bags inflate in the event of certain
frontal or side collisions to help
protect the occupants from serious
physical injury.

[There is no single speed at which the
air bags will inflate. Generally, air bags
are designed to inflate based upon the
severity of a collision and its direction.
These two factors determine whether
the sensors produce an electronic
deployment/inflation signal.

[The front air bags will completely
inflate and deflate in an instant. It is
virtually impossible for you to see the
air bags inflate during an accident. It is
much more likely that you will simply
see the deflated air bags hanging out
of their storage compartments after
the collision.

[In addition to inflating in serious side
collisions, vehicles equipped with a
rollover sensor, side and/or curtain air
bags and front center side air bag will
inflate if the sensing system detects a
rollover.
When a rollover is detected, curtain
air bags will remain inflated longer to
help provide protection from ejection,
especially when used in conjunction
with the seat belts.