rear view mirror GMC ACADIA 2021 Get To Know Guide

7
POWER SEAT ADJUSTMENTSF
A. Seat Adjustment
Move the horizontal control to move the seat forward or rearward and to tilt, raise
or lower the seat.
B. Seatback Recline Adjustment
Move the vertic al control to recline or raise the seatback.
C. Lumbar Support Adjustment
Press the rear control to adjust the amount of lumbar support.
SET MEMORY SEAT POSITIONSF
With the ignition On or in Accessory mode:
1. Adjust the seat and power outside mirrors to the desired positions.
2. Press and release the SET button on the
driver’s door. A beep will sound.
3. Immedia tely press and hold button 1 or 2
until two beeps sound.
To store a s eat position for more clearance when exiting the vehicle, repeat these steps using the Exit
button instead of button 1 or 2 .
RECALL MEMORY SEAT POSITIONSF
Press and hold button 1, 2 or Exit until the seat and mirrors reach the set position.
The memory/exit positions can be programmed to be recalled automatically.
To set the Memory Rec all options, go to Settings > Vehicle > Seating Position.
FRONT SEATS
HEAD-UP DISPLAYF
The Head-Up Display (HUD) projects some operating information on the windshield. Temporary information, such as audio changes and navigationF maneuvers, also may be displayed. The HUD controls are located on the left side of the instrument panel.
HUD HUD
Lift up or press down to adjust the position of the image.
It cannot be adjusted side-to-side.
INFO
Press to select from four displays: Speed View; Audio/Phone
View; Navigation View; and Performance View.
+ – Brightness
Lift up  or  pres s  down  to  brighten  or  dim  the  dis play.  Hold  down  to  tu rn  off  the  dis play.
See Instruments and Controls in your Owner’s Manual.
F Optional equipment
See Seats and Restraints in your Owner’s Manual.
AC
B

18
CRUISE CONTROL
SETTING CRUISE CONTROL
1. Press the On/Off button. The Cruise Control symbol will illuminate in white on the
instrument cluster.
2. When traveling at the des ired speed, press the SET– button to set the speed. The
symbol will illuminate in green on the instrument cluster.
ADJUSTING CRUISE CONTROL
RES+ Resume/Accelerate
Press to resume a set speed. When the
system is active, press to increase speed.
SET– Set/Coast
When the system is active, press to decrease
speed.
Cancel
Press to cancel the Cruise Control without erasing the set speed from memory. Pressing the
brake pedal will also cancel the Cruise Control.
The set  speed  is eras ed  when  Cru ise  Control  or  the  vehicle  ignition  is tu rned off.
ADAPTIVE CRUISE CONTROLF
The system maintains the Cruise Control set speed and a following gap — the time between
your vehicle and a vehicle detected directly ahead — by accelerating or braking automati -
cally while you continue to steer.
Press the Following Gap button to select  a  following  gap  s etting  of  Far,  Mediu m,  or Near. This is also  the  Forwa rd  Collis ion  AlertF setting.
Press and hold the Cancel button to switch between regular Cruise Control and Adaptive Cruise Control.
See Driving and Operating in your Owner’s Manual.
F Optional equipment
REAR CAMERA MIRRORF
The rear  camera mirror  provides  a  wider,  les s obs tructed  field  of  view  to  as sist  when  driving, changing lanes and  c hecking  tra ffic c onditions. 
A. On/Off
Pull or push the lever at the bottom of the mirror to tu rn  the  video  dis play  on  or  off. 
B. Selection Control
Press and release the button to select the brightness, zoom, or tilt setting.
C.
Adjustment
Press and release either button to adjust the selected setting.
See Keys, Doors and Windows in your Owner’s Manual.
ABC