clock GMC SIERRA 1996 Owner's Manual

Front Turn Signal Lamps (Sealed Beam Headlamps)
1. Remove the two screws
at the inside edge
of
the parkinghrn signal
lamp assembly.
2. Remove the lamp assembly by swinging it out from
the inside edge and sliding it out at the outside edge.
3. Squeeze the tab on the side of the lamp socket while
turning
the socket counterclockwise.
4. Pull the socket out of the
lamp assembly.
5. Push in gently on the bulb, turn it counterclockwise
and remove
it from the socket.
6. Put the new bulb in the socket, gently press in on the
bulb and turn
it to the right until it is tight.
7. Put the socket back into the lamp assembly and turn
it to the right until it locks.
8. Put the parking/tut-n signal lamp assembly back into
the vehicle and tighten the screws.
6-40
ProCarManuals.com

Front Wrn Signal Lamps
(Composite Headlamps)
1. Remove the screws and
take out the parkinghrn
signal lamp assembly.
3. Pull the socket out of the
lamp assembly.
.
b
4. Push in gently on the bulb, turn it counterclockwise
and remove it from the socket.
5. Put the new bulb in the socket, gently press in on the
2. Squeeze the tab on the.side of the lamp socket while
bulb and turn it to the right 'until it is tight.
turning the socket counterclockwise.
" 6. Put the socket back into the lamp assembly and turn
it socket to the right until it locks.
7. Put the parkinghurn signal lamp assembly back into
the vehicle and tighten the screws.
6-41
ProCarManuals.com

Fender Marker Lamps
(Dual Rear Wheel Pickup Models)
2. Turn the bulb socket
counterclockwise
and remove
it from the
lens assembly.
3. Pull the bulb straight out of the socket.
4. Put a new bulb into the socket and push it in until
it is tight.
5. Put the socket back into the lens assembly and turn it
clockwise to tighten it.
6. Replace the lens and tighten the screws.
6-42
ProCarManuals.com

Sidemarker Lamps
I. Remove the screws and
pull out the parkingkurn
signal lamp assembly.
2. Reach through the opening and turn the sidemarker
bulb socket counterclockwise and remove it.
3. Pull the bulb straight out
of the socket.
4. Put a new bulb into the socket and push it in until
it is tight.
5. Put the socket back into the sidemarker assembly
and turn
it clockwise to tighten it.
6. Replace the parking/turn signal lamp assembly and
tighten the screws.
ProCarManuals.com

4. Push in gently on
the bulb, turn it
counterclockwise
c
. ..
and remove it from
the socket .
5. Put in a new bulb and, pushing in gently, turn it
clockwise
until it is tight.
6. Put the socket back in the latnp assembly and replace
the lens and lens seal.
indshield Wiper Blade l.Lpldcement
For proper type and length, see "Normal Maintenance
Replacement Parts"
in the Index. To replace the
windshield wiper blade assembly:
1
1. Lift the wiper arm and rotate the blade until it is
facing away
from the windshield.
2. Push the release lever and slide the wipcr asselnbly
toward the driver's side
of the vehicle.
3. Install a new blade by reversing Steps I and 2.
ProCarManuals.com

Clock. Setting the ................................ 3-7
Clutch Fluid. Hydraulic
.......................... 6-23
Comfort Controls
................................ 3- I
Compact Disc Care ............................. 3-24
Compact Disc Player
....................... 3.15. 3.17
Compass. Rearview Mirror
with ................... 2-44
Console Storage
................................ 2-49
Control of
a Vehicle .............................. 4-5
Convex Outside Mirror .......................... 2-46
Coolant
....................................... 6-26
Heater. Engine
............................... 2- 12
RecoveryTank
............................... 5-14
Cooling System
................................ 5- 12
Courtesy Transportation
........................... 8-6
Cruise Control
................................. 2-36
Cupholders
.................................... 2-49
Customer Assistance Information
................... 8- I
Customer Satisfaction Procedure .................... 8- I
Customer Assistance for Text Telephone Users ......... 8-3
Damage. Finish
............................... 6-64
Damage. Sheet Metal
............................ 6-64
Daytime Running Lamps
......................... 2-40
Daytime Running Lamps Indicator Light
............ 2-67
Dead Battery
................................... 5-2
Defects. Reporting Safety ......................... 8-8
Defensive Driving ............................... 4- I
Defogger. Rear Window .......................... 3-6
Defog ing and Defrosting
......................... 3-5
Dolby B Noise Reduction 3- I4 8 .......................
Dome Lamps .................................. 2-42
Door Locks
....................................... 2-4
Storagepocket
............................... 2-51
Third
........................................ 2-3
Downshifting
.................................. 2-19
Driver Position ................................. 1-13
Driving
City
........................................ 4-33
Defensive
.................................... 4-1
Drunken ..................................... 4-2
Freeway
.................................... 4-34
Guidelines
.................................. 4-13
In a Blizzard ................................. 4-40
IntheRain
.................................. 4-30
Night
...................................... 4-28
Off-Road
................................... 4-13
OnCurves
................................... 4-8
On Grades While Towing
a Trailer ............... 4-57
On Hill and Mountain Roads
.................... 4-36
OnSnowandIce
............................. 4-38
Throughwater
............................... 4-32
WetRoads
.................................. 4-30
Winter
...................................... 4-38
With a Trailer
................................ 4-55
Drunken Driving ................................ 4-2
Easy Entry Seat
................................ 1-6
Electrical Equipment. Adding ........... 2.12. 3.23. 6-68
Electrical System
............................... 6-68
Electrochromic Day/Night Rearview Mirror .......... 2-44
9-3
ProCarManuals.com