brake GMC SIERRA 1996 Manual Online
[x] Cancel search | Manufacturer: GMC, Model Year: 1996, Model line: SIERRA, Model: GMC SIERRA 1996Pages: 404, PDF Size: 21.57 MB
Page 358 of 404

Long Trip/Highway Maintenance Schedblt: -- Gasoline Enginee
30,000 Miles (50 000 km)
0 Change engine oil and filter (or every
12 months, whichever occurs first).
An Emission Corztrol Service.
0 Lubricate chassis components; see footnote #
(or every 12 months, whichever occurs first).
0 Check readfront axle fluid level and add
fluid as needed. Check constant velocity
joints
and axle seals for leaking. :k:f:
0 For Two-Wheel-Drive vehicles only: Clean and repack the front
wheel bearings (or at
' each brake relining, whichever occurs first).
0 Replace fuel filter. An Emission Cmrd Ser-vice. 3'
0 Vehicles With GVWR Above 8,500 lbs.
Only: Inspect shields and underhood
insulation for damage or looseness. Adjust
or replace as required.
Tlzis is L[ Noise Emissiorz
Control Service.
Appliccrble only to \vhiclt~s sol~i in
the United Stutes.
0 If your engine has a thermostatically
controlled cooling fan, inspect all hoses
and ducts
for proper hook-up (or every
12 months, whichever occurs first). Be sure
the valve works properly.
This is a Noise
Emissior~
Control Service. Applicwble only to
vehicles sold in the United Stutes.
7-32
ProCarManuals.com
Page 359 of 404

Long Tripmighway Maintenance Schedule -- Gasoline Engines
37,500 Miles (62 500 km)
0 Change engine oil and filter (or every
12 months, whichever occurs first).
An Et12ission Control Service.
0 Lubricate chassis components; see footnote #
(or every 12 months, whichever occurs first).
Check readfront axle fluid level and add fluid
as needed. Check constant velocity joints and
axle seals for leaking.
**
0 Rotate tires. See “Tire Inspection and Rotation”
in the Index for proper rotation pattern and
additional information. During tire rotation,
check brake calipers for freedom of movement.
Refer to the appropriate
GM service manual for
proper caliper service procedures.
I ACTUAL MILEAGE I SERVICED BY I
45,000 Miles (75 000 km)
0 Change engine oil and filter (or every
12 months, whichever occurs first).
An Emissiorl Cuntr-ol Service.
0 Lubricate chassis components; see footnote #
(or every 12 months, whichever occurs first).
El Check readfront axle fluid level and add
fluid
as needed. Check constant velocity
joints and axle seals for leaking.
:w
0 Vehicles With GVWR Above 8,500 lbs.
Only: Inspect shields and underhood
insulation for damage or looseness. Adjust
or replace
as required. This is LZ Noise Enaission
Control
Service. Applicwble oldy to whicles sold in
tlw United Stntes.
(Continued)
7-33
ProCarManuals.com
Page 361 of 404

Manual transmission fluid doesn’t require change.
DATE ACTUAL MILEAGE SERVICED BY:
52,500 Miles (87 500 km)
0 Change engine oil and filter (or every
12 months, whichever occurs first).
An Ewissioi1 Control Service.
0 Lubricate chassis components; see footnote ##
(or every 12 months, whichever occurs first).
0 Check readfront axle fluid level and add fluid
as needed. Check constant velocity joints and
axle seals for leaking.
**
0 Rotate tires. See “Tire Inspection and Rotation”
in
the Index for proper rotation pattern and
additional information. During tire rotation,
check brake calipers for freedom of movement.
Refer to the appropriate
GM service manual for
proper caliper service procedures.
~ ~ ~~
DATE ACTUAL MILEAGE SERVICED BY:
ProCarManuals.com
Page 362 of 404

Con Tripmighway Maintenance Schedule -- Gasoline Engines
60,000 Miles (100 000 km)
0 Change engine
oil and filter (or every
12 months, whichever occurs first).
An. Emission Control Service.
0 Lubricate chassis components; see footnote #
(or every 12 months, whichever occurs first).
0 Check readfront axle fluid level and add
fluid as needed. Check constant velocity
joints and axle seals for leaking.
‘w
For Two-Wheel-Drive vehicles only: Clean
and repack
the front wheel bearings (or at
each brake relining, whichever occurs first).
0 Inspect engine accessory drive belt.
c] Replace fuel filter. AII Emissiorz Control Service.
An En?.ission Control Service.
0 Inspect fuel tank, cap and lines for damage
or leaks. Inspect
fuel cap gasket for any
damage. Replace parts as needed.
An Etnission Control Service.
c] Vehicles With GVWR Above 8,500 lbs.
Only: Inspect shields and underhood
insulation for damage or looseness. Adjust
or replace
as required. This is a Noise Emission
Control Service. Applicdde
ouly to wkicles sold in
the United Stms.
0 If your engine has a thermostatically
controlled cooling fan, inspect all hoses
and ducts for proper hook-up (or every
12 months, whichever occurs first). Be sure
the valve works properly.
This is (7 Noise
Elnission Control Service. Applicable
only to
rvhiclps
snl~J in tlw Unitd Stms.
7-36
ProCarManuals.com
Page 363 of 404

Long Tripmighway Maintenance Schedule -- Gasoline Engines
0 Conduct Exhaust Gas Recirculation (EGR)
system inspection as described
in the
service manual.
An Emissiorz Control Service. 3‘
inspection. Check all fuel and vapor lines
and hoses for proper hook-up, routing and
condition. Check that
the purge valve works
properly, if equipped. Replace
as needed.
0 Conduct evaporative control system
At1 Emission Control Service. -f-
I DATE I ACTUAL MILEAGE ISERVICED BYI
67,500 Miles (112 500 km)
0 Change engine oil and filter (or every
12 months, whichever occurs first).
An E1uissim Control Service.
0 Lubricate chassis components; see footnote #
(or every 12 months, whichever occurs first).
0 Check readfront axle fluid level and add fluid
as needed. Check constant velocity joints and
axle seals for leaking. **
0 Rotate tires. See “Tire Inspection and Rotation“
in the Index for proper rotation pattern and
additional information. During tire rotation,
check brake calipers for freedom
of movement.
Refer
to the appropriate GM service manual for
proper caliper service procedures.
I DATE I ACTUAL MILEAGE I SERVICED BY:
7-37
ProCarManuals.com
Page 365 of 404

1 Long Tripmighway Maintenance Schedule -- Gasoline Engines I
82,500 Miles (137 500 km)
Change engine oil and filter (or every
12 months, whichever occurs first).
AI? Emissiorz Control Service.
0 Lubricate chassis components; see footnote #
(or every 12 months, whichever occurs first).
0 Check readfront axle fluid level and add fluid
as needed. Check constant velocity joints and
axle seals for leaking.
**
0 Rotate tires. See ‘‘Tire Inspection and Rotation’’
in the Index for proper rotation pattern and
additional information. During tire rotation,
check brake calipers for freedom of movement. Refer to the appropriate
GM service manual for
proper caliper service procedures.
I DATE I ACTUAL MILEAGE lSERVICED BY I
90,000 Miles (150 000 km)
0 Change engine oil and filter (or every
12 months, whichever occurs first).
An Emission Cmsd Sesvice.
0 Lubricate chassis components;. see footnote #
(or every 12 months, whichever occurs first).
0 Check readfront axle fluid level and add
fluid
as needed. Check constant velocity
joints and axle seals
for leaking. **
0 For Two-Wheel-Drive vehicles only: Clean
and repack
the front wheel bearings (or at
each brake relining, whichever occurs first).
[7 Replace fuel filter. An E~zzission Corztrol Service.
(Continued)
7-39
ProCarManuals.com
Page 366 of 404

Long Tripmighway Maintenance Schedule -- Gasoline Engines I
90,000 Miles (150 000 km) (Continued)
0 Vehicles With GVWR Above 8,500 lbs.
Only: Inspect shields and underhood
insulation for damage or looseness. Adjust
or replace as required. This is (I Noise Emission
Control Service. Applicable
only to vehicles sold if1
the United States.
0 If your engine has a thermostatically
controlled cooling fan, inspect all hoses
and ducts for proper hook-up (or every
12 months, whichever occurs first). Be sure
the valve
works properly. This is a Noise
Emission Control Service.
Appliccdde only to
vehicles
sold in the United States.
I DATE I ACTUAL MILEAGE ISERVICED BY I
97,500 Miles (162 500 km)
0 Change engine oil and filter (or every
12 months, whichever occurs first).
An Eulission Control Service.
0 Lubricate chassis components; see footnote #
(or every 12 months, whichever occurs first).
0 Check readfront axle fluid level and add fluid
as needed. Check constant velocity joints and
axle seals for leaking.
**
0 Rotate tires. See “Tire Inspection and Rotation”
in the Index for proper rotation pattern and
additional information. During tire rotation,
check brake calipers for freedom of movement.
Refer
to the appropriate GM service manual for
ProDer caber service Procedures.
7-40
ProCarManuals.com
Page 370 of 404

Starter Switch Check When
you are doing this check, the vehicle could
move suddenly.
If it does, you or others could be
injured. Follow the steps below.
1.
2.
3.
Before you start, be sure you have enough room
around the vehicle.
Firmly apply both the parking brake
(see “Parking
Brake” in the Index if necessary) and the regular brake.
NOTE: Do not use the accelerator pedal, and be
ready
to turn off the engine immediately if it starts.
On automatic transmission vehicles, try
to start the
engine in each gear. The starter should work only in
PARK (P) or NEUTRAL (N). If the starter works in
any other position, your vehicle needs service.
On manual transmission vehicles, put the shift lever
in NEUTRAL (N), push.the clutch down halfway
and
try to start the engine. The starter should work
only when the clutch is pushed down
all the way to
the floor.
If the starter works when the clutch isn’t
pushed all the way down, your vehicle needs service.
Brake-Transmission Shift Interlock (BTSI)
Check (Automatic Transmission)
I A CAUTION:
When you are doing this check, the vehicle could
move suddenly.
If it does, you or others could be
injured. Follow the steps below.
1.
2.
3.
Before you start, be sure you have enough
room around the vehicle. It should be parked
on
a level surface.
Firmly apply the parking brake (see “Parking Brake”
in the Index if necessary).
NOTE: Be ready to
apply the regular brake
immediately
if the vehicle begins to move.
With the engine off,
turn the key to the RUN
position, but don’t start the engine. Without applying
the regular brake, try
to move the shift lever out of
PARK (P) with normal effort. If the shift lever moves
out of PARK
(P), your vehicle’s BTSI needs service.
7-44
ProCarManuals.com
Page 371 of 404

Steering Column Lock Check
While parked, and with
the parking brake set, try to turn
the key
to LOCK in each shift lever position.
With an automatic transmission, the key should turn
With a manual transmission, the key should turn
to LOCK only when the shift lever is in PARK (P).
to LOCK only when the shift lever is in
REVERSE
(R).
On vehicles with a key release button, try to turn the key
to LOCK without pressing the button. The key should
turn to LOCK
only when you press the key button.
On all vehicles, the key should come out
only in LOCK. Parking Brake and Automatic Transmission
PARK
(P) Mechanism Check
I CAUTION:
When
you are doing this check, your vehicle
could begin to move.
You or others could be
injured and property could be damaged.
Make
sure there is room in front of your vehicle in case
it begins to roll. Be ready to apply the regular
brake at once should the vehicle begin to move.
Park
on a fairly steep hill, with the vehicle facing
downhill. Keeping your foot
on the regular brake, set
the parking brake.
0 To check the parking brake: With the engine running
and transmission in NEUTRAL
(N), slowly remove
foot pressure from the regular brake pedal.
Do this
until the vehicle
is held by the parking brake only.
To check the PARK (P) mechanism’s holding ability:
With the engine running, shift
to PARK (P). Then
release all brakes.
7-45
--- -
ProCarManuals.com
Page 373 of 404

Drive Axle Service
Check readfront axle fluid level and add its needed.
Check constant velocity joints and axle seals for leaking.
Transfer Case (Four-wheel Drive)
Inspection
Every 12 months or at oil change intervals, check front
axle and transfer case and add lubricant
when necessary.
Oil
the control lever pivot point and all exposed control
linkage. Check
vent hose at transfer case for kinks and
proper installation. More frequent lubrication
may be
required
on off-road use.
Brake System Inspection
Inspect the complete system. Inspect brake lines and
hoses for proper hook-up, binding, leaks, cracks,
chafing, etc. Inspect disc brake pads for wear and rotors
for surface condition. For vehicles with rear drum
brakes, also inspect drum brake linings for wear and
cracks. Inspect other brake parts, including drums,
wheel cylinders, calipers, parking brake, etc. Check
parking brake adjustment. You may need to have your
brakes inspected more often
if your driving habits or
conditions result
in frequent braking.
ProCarManuals.com