GMC TERRAIN 2019 Get To Know Guide

1
Review this Quick Reference Guide for an overview of some important features in your GMC Terrain. Some optional equipment described in this guide may not be included in your vehicle. More information can be found in your Owner’s Manual and at my.gmc.com/learn. For easy reference, keep this guide with your Owner’s Manual in your glove box.
gmc.com
2019 TERRAIN
GETTING TO KNOW YOUR
Certain restrictions, precautions, and safety procedures apply to your v\
ehicle. Please read your Owner’s Manual for complete instructions.
Instrument Panel . . . . . . . . . . . . . .2Remote Keyless Entry Transmitter . . . . . . . . . . . . . . . . . . .4Keyless Access System . . . . . . . . .4Keyless (Pushbutton) Start . . . . . .5Auto Engine Stop/Start Operation . . . . . . . . . . . . . . . . . . . .5Electronic Precision Shift Transmission . . . . . . . . . . . . . . . . . .6Electric Parking Brake . . . . . . . . . .6Steering Wheel Adjustment . . . . .7Front Seats . . . . . . . . . . . . . . . . . . .7
Rear Seats . . . . . . . . . . . . . . . . . . .8Wipers and Washers . . . . . . . . . . .8Lighting . . . . . . . . . . . . . . . . . . . . . .9Universal Remote System . . . . . . .9Climate Controls . . . . . . . . . . . . .10Driver Information Center . . . . .11Audio Steering Wheel Controls 11Infotainment System . . . . . . . . . .12Bluetooth System . . . . . . . . . . . .144G LTE Wi-Fi Hotspot . . . . . . . . .15Wireless Charging . . . . . . . . . . . .15
Vehicle Personalization . . . . . . . .15Teen Driver . . . . . . . . . . . . . . . . . .15Driver Assistance Systems . . . . .16Cruise Control . . . . . . . . . . . . . . .18Traction Select System . . . . . . . .18Hill Descent Control . . . . . . . . . .19Tire Pressure Monitor . . . . . . . . .19Power Programmable Liftgate .19Roadside Assistance . . . . . . . . . .20myGMC Mobile App . . . . . . . . . .20GMC Owner Center . . . . . . . . . . .20

2
Turn Signal Lever/IntelliBeam ButtonF
Driver Information Center
Steering Wheel Adjustment Lever
Audio Next-Previous Favorite Station Controls (behind steering wheel)
Windshield Wipers Lever
Engine Start-Stop ButtonCruise Control/Forward Collision AlertF/Heated Steering WheelF Buttons
Power Mirror/Window Controls
Power Liftgate ControlF
INSTRUMENT PANEL
Audio Volume Controls (behind steering wheel)
Driver Information Center Controls/Voice Recognition Buttons
Memory Seat ButtonsF
Exterior-Interior Lamp Controls/Electric Parking Brake Switch
Check Engine
Engine Oil Pressure
Lane Keep Assist Warning
Airbag Readiness
Cruise Control Set
Service Electric Parking Brake
Traction Control/StabiliTrak Active
Charging System
Security
Seat Belt Reminder
Brake System Warning
Electric Parking Brake
IntelliBeam Lighting
Symbols

3
Refer to your Owner’s Manual to learn about the information being relayed by the lights, gauges and indicators of the instrument cluster.
See In Brief in your Owner’s Manual .
Infotainment System Touch Screen
Driver Mode Control/Hill Descent Button/Lane Keep Assist ButtonF
USB ports/Auxiliary Input/Accessory Power Outlet
Infotainment System ControlsHazard Warning Flashers Button
Park Assist/Automatic Parking Assist ButtonsF
Climate Controls
Passenger’s HeatedF/Ventilated Seat ButtonsF
Electronic Precision Shift Transmission Controls
Driver’s HeatedF/Ventilated Seat ButtonsF
Lights On Reminder
Antilock Brake System Warning
Low Tire Pressure
Power Steering Warning
Vehicle Ahead
StabiliTrak Off
2 Passenger Seat Belt Reminder
F Optional equipment

4
The Keyless Access System enables operation of the doors, ignition and liftgate without removing the Remote Keyless Entry transmitter from your pocket or purse . The transmitter must be within 3 feet of the door being unlocked or within 3 feet of the liftgate.
KEYLESS UNLOCKING
With the transmitter within range:
Press the lock button on the driver’s door handle to unlock the driver’s door; press it again within 5 seconds to unlock all doors .
Press the lock button on a passenger door handle to unlock all doors .
Press the touchpad on the liftgate handle to open the liftgate .
KEYLESS LOCKING
With the ignition off, the transmitter removed from the vehicle, and all doors closed:
Press the lock button on any door handle to lock all doors immediately .
If Passive Locking is turned on, all doors will lock automatically after a short delay .
Note: To change the keyless locking and unlocking settings, go to Settings > Vehicle > Remote Lock, Unlock, Start.
Lock
Press to lock all doors .
Unlock
Press to unlock the driver’s door . Press again to unlock all doors .
Power LiftgateF
Press twice to open or close the liftgate . Press once to stop power liftgate operation .
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle . The exterior lamps will flash and the horn will sound .
Press and hold to activate the alarm . Press again to cancel the alarm .
Note: To change the remote settings, go to Settings > Vehicle > Remote Lock, Unlock, Start.
Remote Vehicle StartF
Press and release the Lock button and then immediately press and hold the but-ton until the turn signal lamps flash to start the engine from outside the vehicle . After entering the vehicle, turn on the ignition .
• During a remote start, the engine will run for 15 minutes . Repeat these steps to run the engine for an additional 15 minutes . A remote start can be extended once .
• Press and hold the button until the parking lamps turn off to cancel a remote start .
Remote Start Auto Heated/Ventilated SeatsF:
Select the Remote Start Auto Heat Seats or Remote Start Auto Cool Seats option in the Vehicle Settings to have the heated or ventilated seats turn on during a remote start . The seat button indicators do not illu-minate and the temperature performance of the unoccupied seats may be reduced during a remote start .
KEYLESS ACCESS SYSTEM
See Keys, Doors and Windows in your Owner’s Manual .F Optional equipment
REMOTE KEYLESS ENTRY TRANSMITTER
See Keys, Doors and Windows in your Owner’s Manual .

5
KEYLESS (PUSHBUTTON) START
AUTO ENGINE STOP/START OPERATION
F Optional equipment
The Remote Keyless Entry transmitter must be in the vehicle to turn on the ignition .
STARTING THE ENGINE
With the vehicle in Park or Neutral, press the brake pedal and then press the E N G I N E S TA R T/ S T O P button to start the engine . The green indicator on the button will illuminate .
Note: If the Remote Keyless Entry transmitter battery is weak, place the transmitter in the driver-side cupholder in the center console to enable the engine to start. Replace the transmitter battery as soon as possible.
STOPPING THE ENGINE/OFF
Shift to Park and press the E N G I N E S TA R T/ S T O P button to turn off the engine.
Power will be available for 10 minutes to operate the audio system until the driver’s door is opened and to operate the windows and sunroofF until any door is opened .
ACCESSORY MODE
With the engine off and the brake pedal NOT depressed, press the E N G I N E S TA R T/ S T O P
button to place the ignition system in the accessory mode . The amber indicator on the button will illuminate .
See Driving and Operating in your Owner’s Manual .
An automatic stop/start system has been integrated with the engine to help conserve fuel . While driving, when the brake pedal is applied and the vehicle is at a complete stop, the automatic stop/start system may turn off the engine, depending on operating conditions. When the engine is off, the tachometer gauge will read AUTO STOP. Upon releasing the brake pedal or applying the accelerator pedal, the engine will restart . After parking the vehicle and turning off the engine, the tachometer gauge will read OFF.
The engine may remain running or restart when the vehicle is stopped if:
• A minimum vehicle speed is not reached .
• The engine or transmission is not at the required operating temperature .
• The outside temperature is not in the required operating range .
• The transmission is in any gear other than Drive (D) .
• The battery charge is low .
• The climate control system requires the engine to run based on the current settings .
• The Auto Stop time is greater than 2 minutes .
See Driving and Operating in your Owner’s Manual .

6
ELECTRIC PARKING BRAKE
ELECTRONIC PRECISION SHIFT TRANSMISSION
The Electronic Precision Shift transmission
control switches are located on the front
console . The selected gear position illuminates in red on the switch . Bring the vehicle to a
complete stop before shifting the transmission .
Park – Press the P button to shift to Park .
Reverse – Pull the R switch to shift to Reverse .
Neutral – Press the N button to shift to Neutral .
Drive – Pull the D switch to shift to Drive .
ELECTRONIC RANGE SELECT (MANUAL) MODE
Electronic Range Select Mode allows you to choose the top gear limit . It can be used to limit the vehicle’s speed when driving on a downhill grade or towing a trailer .
1 . Press the L (Low) button .
2 . Press the + (plus) or – (minus) button to increase or decrease the gear range available . The current gear is displayed on the Driver Information Center .
If vehicle speed is too high or low for the requested gear, the shift will not occur .
CAR WASH MODE
The Car Wash Mode enables the vehicle to remain in Neutral when using automatic car washes. There are different procedures for when the driver remains in or exits the vehicle and for vehicles equipped with a gasoline or diesel engine . Refer to your Owner’s Manual for more information .
See Driving and Operating in your Owner’s Manual .
To apply the parking brake, press the Parking Brake button on the left side of the instrument panel .
To release the parking brake, turn on the ignition, press the brake pedal, and then press the button .
Note: The parking brake will release automatically if the vehicle is running, placed into gear and an attempt is made to drive.
See Driving and Operating in your Owner’s Manual .

7
STEERING WHEEL ADJUSTMENT
FRONT SEATS
F Optional equipment
With the vehicle parked, push down the lever under the steering column to adjust the steering wheel . The steering wheel can be moved up or down and in or out . Pull up the lever to lock the steering wheel in place .
See Instruments and Controls in your Owner’s Manual .
POWER SEAT ADJUSTMENTSF
A. Seat Adjustment
Move the horizontal control to move the seat forward or rearward and to tilt, raise or lower the seat .
B. Seatback Recline Adjustment
Move the top of the vertical control to recline or raise the seatback .
C. Lumbar Support Adjustment
Press and hold the rear control to adjust the lumbar support .
SET MEMORY SEAT POSITIONSF
With the ignition On or in Accessory mode:
1 . Adjust the seat and power outside mirrors to the desired positions .
2 . Press and release the SET button on the driver’s door . A beep will sound .
3 . Immediately press and hold button 1 or 2 until two beeps sound .
To store a seat position for when exiting the vehicle, repeat these steps using the Exit button .
RECALL MEMORY SEAT POSITIONSF
Press and hold button 1, 2 or Exit until the seat and mirrors reach the set position .
The memory/exit positions can be pro-grammed to be recalled automatically .
To set Seat Entry Memory and Seat Exit Memory, go to Settings > Vehicle > Seating Position .
FOLD-FLAT FRONT PASSENGER
SEATBACK
1 . Lower the head restraint and move the seat as far back as possible .
2 . Lift the recline lever (D) and fold the seatback forward .
To raise the seatback, lift the recline lever and fully raise the seatback .
See Seats and Restraints in your Owner’s Manual .
BAC
D

8
REAR WIPER
Turn the end of the lever .
OFF
INT Intermittent Wipes
ON
Rear Washer Fluid
Push the lever away from you to spray washer fluid on the rear window .
RECLINE THE REAR SEAT
Pull the lever (A) on the top of the seatback and move the seatback to the desired posi-tion . Release the lever .
FOLD THE REAR SEATBACK
1 . Press the button on the head restraint . It will fold automatically .
2 . Pull the lever (A) on the top of the seatback and fold the seatback forward . A tab near the lever is visible when the seatback is unlatched .
3 . To fold the seatback from the cargo area, pull the top leverF (B) (passenger’s side seat) or bottom leverF (C) (driver’s side seat) located on the passenger’s side of the rear cargo area .
REAR SEAT REMINDER
A Rear Seat Reminder message may display on the Driver Information Center when the vehicle is turned off. Check the rear seat before exiting the vehicle. The system does not actually detect objects in the rear seat; instead, under certain conditions, it detects when a rear door is opened and closed during a trip, indicating that there may be something in the rear seat .
See Seats and Restraints in your Owner’s Manual .
REAR SEATS
WIPERS AND WASHERS
WINDSHIELD WIPERS
Raise or lower the wiper lever .
HI Fast Wipes
LO Slow Wipes
INT Intermittent Wipes
Rotate the band up for more frequent wipes or down for less frequent wipes .
OFF
1x Single Wipe
Washer Fluid
Pull the lever toward you to spray washer fluid on the windshield.
F Optional equipmentSee Instruments and Controls in your Owner’s Manual .
B
C
A

9
LIGHTING
UNIVERSAL REMOTE SYSTEMF
EXTERIOR LAMP CONTROL
Rotate the knob on the left side of the instru-ment panel to activate the exterior lamps .
Off/On
AUTO
Automatically activates the Daytime Running Lamps (DRLs) or the headlamps and other exterior lamps depending on outside light conditions .
Parking Lamps
Headlamps
Fog LampsF
Press the button to turn the fog lamps on or off.
INSTRUMENT PANEL LIGHTING
Instrument Panel Illumination
Press and release the knob to extend it . Turn the knob to adjust the instrument panel lighting .
INTELLIBEAM SYSTEMF
The IntelliBeam system automatically turns the high-beam headlamps on/off based on traffic conditions . A green indicator displays on the instrument cluster when the system is on; a blue indicator displays when the high-beam headlamps are on .
Press the button on the turn signal lever with the exterior lamp control in the AUTO or Headlamps position to turn the IntelliBeam system on or off.
Note: IntelliBeam activates the high-beam headlamps only when driving over 25 mph. The IntelliBeam system is turned off if the fog lamps are on.See Lighting in your Owner’s Manual .
F Optional equipment
The Universal Remote System on the overhead console enables your vehicle to control 3 dif-ferent devices, ranging from garage doors and gates to home lighting . Go to www.homelink.com for detailed
videos and instructions on how to program the Universal Remote System . For additional
assistance, call 1-800-355-3515 .
See Instruments and Controls in your Owner’s Manual .

10
CLIMATE CONTROLS
F Optional equipment
Fan Speed Control or Driver’s Temperature ControlF
A/C Air Conditioning Control Vent Mode
Fan Speed Control/Power On-OffF
AUTO Automatic OperationF
Recirculation Mode
Rear Window Defog/Heated Outside Mirrors Control
Floor Mode Bi-level Mode
SYNCF Link passenger’s temperature setting to driver’s temperature setting
Defrost Mode
Passenger’s Temperature ControlF Defog Mode
AUTOMATIC OPERATIONF
Press AUTO .
Set the temperature .
The system automatically controls the fan speed, air delivery, air conditioning and
recirculation functions to maintain the set temperature . Allow time for the system to reach the desired temperature . If the functions are manually adjusted, full automatic operation is canceled .
AUTO DEFOGF AND AUTO REAR WINDOW DEFOGF
Auto Defog and Auto Rear Defog automatically turn on when the engine is started .
Go to Settings > Vehicle > Climate and Air Quality to turn the Auto Defog and Auto Rear Defog settings on or off.
See Climate Controls in your Owner’s Manual .
Dual Automatic Climate ControlsF shown