lock GMC TERRAIN 2019 Get To Know Guide
[x] Cancel search | Manufacturer: GMC, Model Year: 2019, Model line: TERRAIN, Model: GMC TERRAIN 2019Pages: 20, PDF Size: 3.52 MB
Page 3 of 20

3
Refer to your Owner’s Manual to learn about the information being relayed by the lights, gauges and indicators of the instrument cluster.
See In Brief in your Owner’s Manual .
Infotainment System Touch Screen
Driver Mode Control/Hill Descent Button/Lane Keep Assist ButtonF
USB ports/Auxiliary Input/Accessory Power Outlet
Infotainment System ControlsHazard Warning Flashers Button
Park Assist/Automatic Parking Assist ButtonsF
Climate Controls
Passenger’s HeatedF/Ventilated Seat ButtonsF
Electronic Precision Shift Transmission Controls
Driver’s HeatedF/Ventilated Seat ButtonsF
Lights On Reminder
Antilock Brake System Warning
Low Tire Pressure
Power Steering Warning
Vehicle Ahead
StabiliTrak Off
2 Passenger Seat Belt Reminder
F Optional equipment
Page 4 of 20

4
The Keyless Access System enables operation of the doors, ignition and liftgate without removing the Remote Keyless Entry transmitter from your pocket or purse . The transmitter must be within 3 feet of the door being unlocked or within 3 feet of the liftgate.
KEYLESS UNLOCKING
With the transmitter within range:
Press the lock button on the driver’s door handle to unlock the driver’s door; press it again within 5 seconds to unlock all doors .
Press the lock button on a passenger door handle to unlock all doors .
Press the touchpad on the liftgate handle to open the liftgate .
KEYLESS LOCKING
With the ignition off, the transmitter removed from the vehicle, and all doors closed:
Press the lock button on any door handle to lock all doors immediately .
If Passive Locking is turned on, all doors will lock automatically after a short delay .
Note: To change the keyless locking and unlocking settings, go to Settings > Vehicle > Remote Lock, Unlock, Start.
Lock
Press to lock all doors .
Unlock
Press to unlock the driver’s door . Press again to unlock all doors .
Power LiftgateF
Press twice to open or close the liftgate . Press once to stop power liftgate operation .
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle . The exterior lamps will flash and the horn will sound .
Press and hold to activate the alarm . Press again to cancel the alarm .
Note: To change the remote settings, go to Settings > Vehicle > Remote Lock, Unlock, Start.
Remote Vehicle StartF
Press and release the Lock button and then immediately press and hold the but-ton until the turn signal lamps flash to start the engine from outside the vehicle . After entering the vehicle, turn on the ignition .
• During a remote start, the engine will run for 15 minutes . Repeat these steps to run the engine for an additional 15 minutes . A remote start can be extended once .
• Press and hold the button until the parking lamps turn off to cancel a remote start .
Remote Start Auto Heated/Ventilated SeatsF:
Select the Remote Start Auto Heat Seats or Remote Start Auto Cool Seats option in the Vehicle Settings to have the heated or ventilated seats turn on during a remote start . The seat button indicators do not illu-minate and the temperature performance of the unoccupied seats may be reduced during a remote start .
KEYLESS ACCESS SYSTEM
See Keys, Doors and Windows in your Owner’s Manual .F Optional equipment
REMOTE KEYLESS ENTRY TRANSMITTER
See Keys, Doors and Windows in your Owner’s Manual .
Page 7 of 20

7
STEERING WHEEL ADJUSTMENT
FRONT SEATS
F Optional equipment
With the vehicle parked, push down the lever under the steering column to adjust the steering wheel . The steering wheel can be moved up or down and in or out . Pull up the lever to lock the steering wheel in place .
See Instruments and Controls in your Owner’s Manual .
POWER SEAT ADJUSTMENTSF
A. Seat Adjustment
Move the horizontal control to move the seat forward or rearward and to tilt, raise or lower the seat .
B. Seatback Recline Adjustment
Move the top of the vertical control to recline or raise the seatback .
C. Lumbar Support Adjustment
Press and hold the rear control to adjust the lumbar support .
SET MEMORY SEAT POSITIONSF
With the ignition On or in Accessory mode:
1 . Adjust the seat and power outside mirrors to the desired positions .
2 . Press and release the SET button on the driver’s door . A beep will sound .
3 . Immediately press and hold button 1 or 2 until two beeps sound .
To store a seat position for when exiting the vehicle, repeat these steps using the Exit button .
RECALL MEMORY SEAT POSITIONSF
Press and hold button 1, 2 or Exit until the seat and mirrors reach the set position .
The memory/exit positions can be pro-grammed to be recalled automatically .
To set Seat Entry Memory and Seat Exit Memory, go to Settings > Vehicle > Seating Position .
FOLD-FLAT FRONT PASSENGER
SEATBACK
1 . Lower the head restraint and move the seat as far back as possible .
2 . Lift the recline lever (D) and fold the seatback forward .
To raise the seatback, lift the recline lever and fully raise the seatback .
See Seats and Restraints in your Owner’s Manual .
BAC
D
Page 20 of 20

20
!84134734=A!
Certain restrictions, precautions and safety procedures apply to your vehicle . Please read your Owner’s Manual for complete instructions . All information contained in this guide is based on the latest information available at the time of printing and is subject to change without notice . Copyright 2018 General Motors . All rights reserved .
We recommend always using ACDelco or genuine GM service parts.
ROADSIDE ASSISTANCE
1-888-881-3302 TTY Users: 1-888-889-2438
As the owner of a new GMC, you are automatically enrolled in the GMC Roadside Assistance program for up to 5 years/60,000 miles, whichever occurs first, at no expense to you. GMC’s Roadside Assistance toll-free number is staffed by a team of trained
advisors who are
available 24 hours a day, 365 days a year, to contact a service provider for light services (fuel delivery, jump-starts, flat tire and lock-outs) or make arrangements to tow your vehicle to the nearest GMC dealer for any repairs .
OnStar Roadside Assistance
If you have a current OnStar Safety & Security plan, push the blue OnStar button or red Emergency button to get the help you need . An OnStar advisor will use GPS technology to pinpoint your vehicle location and contact the nearest service provider .
To learn more about OnStar services, push the blue OnStar button, visit onstar.com, call 1-888-4-ONSTAR (1-888-466-7827), or refer to your Owner’s Manual .
Get to know your vehicle inside and out with the GMC Owner Center . Check out personal-ized information, including an online Owner’s Manual and helpful how-to videos, track your
service history and warranty status, manage your OnStar and Connected Services vehicle plans, review your current Vehicle Diagnostics report (active service required) and more . Create an account today at my.gmc.com .
GMC OWNER CENTER
Download the myGMC app to your compatible smartphone (or device) and, if your vehicle is properly equipped, you can start or turn off your engine, lock or unlock your doors, view key diagnostic information, set parking information and more .
The app is available on select Apple and Android devices . Service availability, features and functionality vary by vehicle, device and data plan . Device data connection required . Visit onstar.com for more details . Download the mobile app from your compatible mobile device’s app store .
MYGMC MOBILE APP
84134734 A