lumbar support GMC TERRAIN 2020 Get To Know Guide

7
STEERING WHEEL ADJUSTMENT
FRONT SEATS
F Optional equipment
With the vehicle parked, push down the lever under the steering column to adjust the steering wheel. The steering wheel can be moved up or down and in or out. Pull up the lever to lock the steering wheel in place.
See Instruments and Controls in your Owner’s Manual.
POWER SEAT ADJUSTMENTSF
A. Seat Adjustment
Move the horizontal control to move the seat forward or rearward and to tilt, raise or lower the seat.
B. Seatback Recline Adjustment
Move the top of the vertical control to recline or raise the seatback.
C. Lumbar Support Adjustment
Press and hold the rear control to adjust the lumbar support.
SET MEMORY SEAT POSITIONSF
With the ignition On or in Accessory mode:
1. Adjust the seat and power outside mirrors to the desired positions.
2. Press and release the SET button on the driver’s door. A beep will sound.
3. Immediately press and hold button 1 or 2 until two beeps sound.
To store a seat position for when exiting the vehicle, repeat these steps using the Exit button instead of button 1 or 2.
RECALL MEMORY SEAT POSITIONSF
Press and hold button 1, 2 or Exit until the seat and mirrors reach the set position.
The memory/exit positions can be pro-grammed to be recalled automatically.
To set Seat Entry Memory and Seat Exit Memory, go to Settings > Vehicle > Seating Position.
FOLD-FLAT FRONT PASSENGER SEATBACK
1. Lower the head restraint and move the seat as far back as possible.
2. Lift the recline lever (D) and fold the seatback forward.
To raise the seatback, lift the recline lever and fully raise the seatback.
See Seats and Restraints in your Owner’s Manual.
BAC
D