lights GMC YUKON 2006 Get To Know Guide

3
SeeSection3ofyourOwnerManual.
A
B
C
D
E
F
G
InstrumentPanelCluster
Yourvehicle’sinstrumentpanelis
equippedwiththisclusteroronevery
similartoit.
Theinstrumentpanelclusterincludes
thesekeyfeatures:
A.TransmissionTemperatureGauge
(ifequipped)
B.TachometerC.SpeedometerandTransmission
GearSelector
D.OilPressureGauge
E.FuelGauge
F.Voltmeter
G.EngineCoolantTemperature
Gauge
H.DriverInformationCenter(DIC)
andOdometer
NOTE:
SeeSection3ofyourOwner
Manualformoreinformationabout
whatthelights,gaugesandindica
torsonyourvehicle’sinstrument
paneltellyouaboutyourvehicle’s
operation.
H
YukonYukonDenali 06 Beta3 5/19/05 10:03 AM Page 3

5
Automatic Climate Control
System (if equipped)When on, the automatic interior dimming
rearview mirror automatically dims to the
proper level to minimize glare from lights
behind you when it’s dark outside.
Turn the selfdimming function
on or off
• Press and hold for approximately
eight seconds.
Use the OnStar system
• Press to connect to an OnStar®
Advisor.
• Press to answer or end a call
from the OnStar
®Center or Personal
Calling.
•Press in an emergency to connect
to an OnStar
®Advisor who can con
tact the nearest emergency services
provider.
Turn the outside temperature displaysand compass readings on or off
• Press .
Display temperature
• Press and hold for four seconds
(until the display blinks) to toggle
between °C and °F.Once the desired
°C or °F is displayed, release the
button. Wait four seconds and the
temperature will be displayed.
See Section 2 of your Owner Manual.
Adjust settings for automatic
operation
• Push the AUTO button (“A” above)
and adjust the temperature knob (“B”
above) to the desired temperature.
When automatic operation is active,
the system will control the inside
temperature, air delivery, air inlet and
fan speed.
Set same temperature for driver and
front passenger
• Press and hold the AUTO button for
four seconds.
• Turn the passengerside temperature
knob to select a different temperature
for the passenger.
Select air distribution manually
• Press and release the Mode
button (“C” above) until the desired
source of air is indicated on the
display.
The Mode feature allows you to select
air delivery to the floor, the instrument
panel outlets, or the windshield outlets.
Manually raise or lower fan speed
•Press the upper or lower portion of the
Fan Control button (“D” above).
A B
C
D
YukonYukonDenali 06 Beta3 5/19/05 10:03 AM Page 5

Getting to Know YourYukon/Yukon Denali8
SixDisc CD Changer
(Denali models only)
Quick Load
• Press LOAD (“A” above) for approxi
mately three seconds. The lowest
available number will flash.
• Wait for amber lights to flash on sides
of slot (“B” above) before inserting
CD. The next available number will
flash and accept another CD until all
are occupied.
• To exit Quick Load, press either a
number with a CD in it or LOAD.
Quick Unload
• Press EJECT ( ) for approximate
ly three seconds; all CDs will eject
from highest number to lowest.
Load 1 CD
• Press LOAD; all available numbers
will flash amber.
• Select the number desired.
• Wait for amber lights to flash on sides
of slot before inserting CD.
• Insert CD.
• Repeat to load more CDs.
Unload 1 CD
• Press EJECT ( ).
• Press number for CD desired.
Play a CD
• Option 1: Select the number for the
CD desired (wait eight seconds).
• Option 2: Press 5/SIDE button on
radio face to scroll through CDs.
Select CD Track
• Option 1:
PREV/NEXT on
radio.
• Option 2: SEEK
arrows on radio.
• Option 3: SEEK
arrows on steering
wheel.
See Section 3 of your Owner Manual.
A
B
Touch Screen Navigation
Entertainment System
(if equipped)
Your vehicle’s Navigation Entertainment
System provides you with detailed maps
of all major highways and roads
throughout the United States. After you
enter a destination, the system provides
Note:CDs with any labels may jam in
the CD player.Label a CD using a per
manent marker. If more than one CD is
inserted into the slot at one time, or if
scratched or damaged CDs are played,
the CD player could be damaged. When
using the CD player, use only CDs in
good condition without labels; load one
CD at a time; and keep the CD player
and the loading slot free of foreign
materials, liquids and debris.
YukonYukonDenali 06 Beta3 5/19/05 10:03 AM Page 8

Activate the automatic headlamp
system
• Turn the exterior lamps knob to
AUTO. The automatic headlamp
system will turn on the front and
rear lamps.
Manually illuminate the parking
lamps, sidemarker lamps, taillamps,
instrument panel/radio lights, license
plate lamps and roof marker lamps
(if equipped)
• Turn the exterior lamps knob to the
parking lamp position ().
Manually activate the headlamps, all
exterior tail/sidemarker lamps and
the instrument panel/radio lights
• Turn the exterior lamps knob to this
position ( ).
Turn the fog lamps
(if equipped) on
or off
• Press the fog lamp
button located on
the left side of the
instrument panel.
An indicator lamp will illuminate when
the fog lamps are on.
See Section 3 of your Owner Manual.
Getting to Know YourYukon/Yukon Denali12
Automatic Headlamp Controls
Turn off Daytime Running Lamps
(DRL) and automatic headlamps
• Turn the exterior lamps knob (located
to the left of the steering wheel) to
Off ( ) and release.
Power Folding Mirrors
(if equipped)
Fold mirrors
• Move the
selector switch
located above
the mirror
control (“A”
right) to
the center
position.
• Press the right
side of the
fourway control pad (“B” above)
to fold in the mirrors.
• Press the left side of the fourway
control pad to fold out the mirrors.
If the mirrors have been folded manual
ly, they must be moved through the
power folding cycle three times to reset
them in their tracks.
See Section 2 of your Owner Manual.
A
B
Note:Your DRLs or automatic head
lamps will reengage at the next key
cycle.
YukonYukonDenali 06 Beta3 5/19/05 10:04 AM Page 12

15
•Headlamp Delay: 3 Min
•Headlamp Delay: Off
Perimeter Lights
(The headlamps and backup lamps will
come on for 40 seconds, if it is dark
enough, when unlocking the vehicle with
the Remote Keyless Entry transmitter.)
•Perimeter Lights: On
•Perimeter Lights: Off
Easy Exit Seat
(The driver’s seat moves to the exit
position when the key is removed from
the ignition.)
•Easy Exit Seat: Off
•Easy Exit Seat: On
Curb View
(The outside rearview mirror(s) tilt down
when the vehicle is shifted into
Reverse.)
•Curb View: Off
•Curb View: Passenger
•Curb View: Driver
•Curb View: Both
Alarm Warning
(The feedback received when the alarm
is active.)
•Alarm Warning: Both
•Alarm Warning: Off
•Alarm Warning: Horn
•Alarm Warning: Lamps
Language
(The Driver Information Center display
language.)
•Language: English
•Language: Français (French)
•Language: Español (Spanish)
Display Units
(The units in which all information will be
displayed.)
•Display Units: English
•Display Units: Metric
See Section 3 of your Owner Manual.
Odometer/Trip Settings
(if equipped)
Press the trip information button
to scroll through the Odometer,Trip A,
Trip B, Tire Pressures, Timer and
Engine Hours choices on the Driver
Information Center.
Odometer
This mode shows the total distance the
vehicle has been driven in either miles
or kilometers. Pressing the reset stem
located on the instrument cluster with
the vehicle off will also display the
odometer.
Trip A
This mode shows the current distance
traveled since the last reset for TRIP A
in either miles or kilometers.
Trip B
This mode shows the current distance
traveled since the last reset for TRIP B
in either miles or kilometers.
YukonYukonDenali 06 Beta3 5/19/05 10:04 AM Page 15