change time GMC YUKON 2007 Get To Know Guide

13
Setting the Speed Compensated
Volume (if equipped)
With Speed Compensated Volume, the
radio automatically adjusts the volumeto compensate for road noise as vehiclespeed changes.
To set Speed Compensated Volume:
1. Set the radio volume to the desired
level.
2. Press the MENU button to display the
radio setup menu.
3. Press the pushbutton below the auto
volume label on the radio display.
4.Press the pushbutton under the
desired setting (Off, Low, Medium
or High) to select the level ofcompensation.
The compensation will be set once the
display times out after 10 seconds.
Setting the Time
To set the time:
1.Press the (Clock) button. Or, if
equipped, press the MENU button
until the clock option is displayed;
and then press the pushbutton located under the clock option label. The
HR, MIN, MM, DD, YYYY labels will
appear on the display.
2. Press the pushbutton under any of
the labels to be changed.
3.Press the pushbutton again, the right
SEEK arrow or the FWD button toincrease the numbers. Press the leftSEEK arrow or the REV button todecrease the numbers. Rotating theTune knob also will increase or
decrease the selected label.
4. Press the Clock or MENU button
again to set the currently displayedtime and date.
MP3 Capability
Your audio system has MP3 playing
capability. A CDR containing MP3 audiotracks will play automatically when
inserted into the CD player. An MP3symbol will be displayed.
Portable Audio Player
A portable audio player, such as an MP3
player or cassette player, can be connected to the auxiliary input jack locatedon the radio. When connected, the radioautomatically begins playing audio fromthe player over the vehicle speakers.
Radio Data System (if equipped)
When you tune to a Radio Data System
(RDS) station, the station name and callletters will appear on the display instead
of the frequency. RDS stations may alsoprovide the time of day, a program type
for current programming and the nameof the program being broadcast.
RDS features are available for use only
on FM stations that broadcast RDSinformation. RDS relies on receivingspecific information from these stationsand will work only when the informationis available.
See Section 3 of your Owner Manual.

17
This feature allows you to start the
engine from outside the vehicle by using
the Remote Keyless Entry (RKE) trans
mitter. The remote start capability mustbe turned on using the Driver
Information Center.
The vehicle’s automatic climate control
system (if equipped) will default to aheating or cooling mode based onoutside temperature, and the manualclimate control system will turn on at
the same setting as when the vehicle
was last turned off.
Starting the Vehicle
To remote start the vehicle:
1.
Aim the RKE transmitter at the vehicle.
(Transmitter range is within approximately 200 feet of the vehicle.)
2. Press and release the (Lock)
button on the transmitter.
3. Immediately press and hold the
(Remote Start) button for about four
seconds. When the vehicle starts, theparking lamps will turn on. The engine
will continue running for 10 minutes.
4.Repeat these steps for a 10minute
time extension. Only two consecutive
remote starts are allowed.
When you enter the vehicle after a
remote start, the key must be insertedinthe ignition and turned to the Run
position before driving.
Canceling a Remote Start
To turn off the engine instead of driving
after a remote start:
• Press and hold the (Remote Start)
button until the parking lamps turn off.
• Press and release the Hazard
Warning Flashers button. Press it
again to turn off the flashers.
• Turn the key in the ignition switch to
the Run position and then off.
See Section 2 of your Owner Manual.
The power running boards extend from
beneath the vehicle when any side door
is open. The vehicle must be stationary
for the running boards to operate. Todisable the running boards, press the
(Running Boards) disable button on
the instrument panel. Press the button
again to turn the running boards back on.
See Section 2 of your Owner Manual.
The turn signal lever includes an auto
matic lane change signal feature.
To signal a lane change, raise or lower
the lever until the arrow on the instrument panel cluster starts to flash, and
then release the lever. The turn signalwill automatically flash three times. If the
Tow/Haul mode is selected, the turn signal will automatically flash six times.
See Section 3 of your Owner Manual.
Remote Vehicle Start
(if equipped)
Note: Remote Vehicle Start will not
operate if the key is in the ignition, thehood or liftgate is open, or the Check
Engine light is illuminated on the instru
ment cluster.
Auto Turn Signal
Power Running Boards
(if equipped)

23
the vehicle is required, the system
should be turned off.
To turn off the traction control part of the
system, press the (StabiliTrak) button located below the climate controlson the instrument panel.
To turn off the traction control and stabil
ity enhancement systems, press andhold the button for five seconds.
When the system is turned off, the
StabiliTrak light will illuminate.
See Section 4 of your Owner Manual.
The Tire Pressure Monitor alerts you
when a significant reduction in pressureoccurs in one or more of your vehicle’s
tires by illuminating the (Low Tire
Pressure) warning light, which will remain
on until you correct the tire pressure.You
may also have a CHECK TIRE PRESSURE message appear on the DIC (ifequipped).
Correcting the Tire Pressure
When the low tire pressure warning light
illuminates, you must fill the tire to the
proper tire inflation pressure. The Tireand Loading Information label shows thecorrect inflation pressure for the tireswhen they’re cold. “Cold” means yourvehicle has been sitting for at least threehours or driven no more than one mile.
You can temporarily remove the DIC mes
sage by acknowledging it with your DIC
controls. However, at the next vehiclestartup, the DIC message will reappear ifthe tire pressure has not been corrected.
During cooler conditions, the low tire
pressure warning light may appear whenthe vehicle is first started and then turn
Tire Pressure Monitor
off as you start to drive the vehicle. This
could be an early indicator that your tirepressures are getting low and need tobe inflated to the proper pressure.
See Section 5 of your Owner Manual.
The Oil Life System calculates engine oil
life based on vehicle use and displays
CHANGE ENGINE OIL in the Driver
Information Center (DIC) when it’s nec
essary to change your engine oil and fil
ter. The Oil Life System should be reset
to 100% only following an oil change.
Reset the Oil Life System using the DIC:
1. Turn on the ignition.
2. Press the (Vehicle Information)
button until the DIC displays OIL LIFEREMAINING.
3. Press and hold the (Set/Reset)
button until 100% is displayed.
4. Turn off the ignition.
Reset the Oil Life System without the DIC:
1. Turn on the ignition, with the engine off.
2. Fully press and release the accelera
tor pedal slowly three times withinfive seconds.
3.If the CHANGE ENGINE OILmes
sage flashes, the system is reset;
otherwise, repeat the procedure.
4.Turn off the ignition.
See Section 5 of your Owner Manual.
Resetting the Engine
Oil Life System
Note: The Tire Pressure Monitor can
alert you about low tire pressure, but itdoesn’t replace normal monthly tiremaintenance.

Getting to Know YourYukon/Yukon Denali24
15854822 B
Roadside Assistance
My GMLink
The GMC Owner Center at My GMLink
is a complimentary service for GMCowners, a onestop resource to enhanceyour GMC ownership experience.Exclusive member benefits includeonline service reminders, vehicle main
tenance tips, online owner manual, spe
cial privileges and more. Sign up todayat www.mygmlink.com.
Certain restrictions, precautions and safety procedures apply to your vehicle. Please read your Owner
Manual for complete instructions. All information contained herein is based on information available at the
time of printing and is subject to change without notice. Copyright 2006 by GM Corp. All rights reserved.
!15854822=B!
1800GMC8782
(18004628782)
TTY Users: 18888892438As the proud owner of a new GMC
vehicle, you are automatically enrolled in
the GMC Roadside Assistance program.This valueadded service is intended to
provide you with peace of mind as you
drive in the city or travel the open road.
GMC’s Roadside Assistance tollfree
number is staffed by a team of technically
trained advisors, who are available
24 hours a day, 365 days a year. The
advisors can provide minor repair infor
mation or make arrangements to tow
your vehicle to the nearest GMC dealer.
GMC will provide the following services
for 3 years/36,000 miles (60,000 km),atno expense to you:
• Fuel delivery
•Lockout service (identification
required)
•Tow to nearest dealership for warranty
service
• Flat tire assistance
• Jump starts
In many instances, mechanical failures
are covered under GMC’s comprehensive
warranty. However, when other servicesare utilized, our advisors will explain any
payment obligations you might incur.
OWNER INFORMATIONFor prompt and efficient assistance when
calling, please provide the following information to the advisor:
• Location of the vehicle
• Telephone number and your location
• Vehicle model, year and color
• Vehicle mileage
• Vehicle Identification Number (VIN)
• Vehicle license plate number
GMC reserves the right to limit services
or reimbursement to an owner or driver
when, in GMC’s judgment, the claimsbecome excessive in frequency or type
of occurrence.
Roadside Assistance and OnStar®
(if equipped)
If your vehicle is OnStarequipped, press
the blue OnStar button and the vehiclewill send your current GPS location to an
OnStar Advisor who will speak to you,
assess your problem, contact Roadside
Assistance and relay your exact location
so you will get the help you need.