lock GMC YUKON 2007 Get To Know Guide

Getting to Know YourYukon/Yukon Denali4
Vehicle Symbols
Following are examples of symbols you
may find on your vehicle. It is importantto become familiar with them, as theyalert you to various vehicle operatingconditions.
Air Bag Readiness Light
Air Conditioning (A/C)
Antilock Brake System
Warning Light
Brake System Warning Light
(Parking Brake Set)
Cruise Control SetHeadlamps
Malfunction Indicator Lamp
(Check Engine Light)
Off
Off/On
On
Rear Window Defogger
Safety Belt Reminder Light
2
Safety Belt Reminder Light,
Passenger
Security Light
StabiliTrak Warning Light
Tire Pressure LightTow/Haul Mode Light
Traction Control Off Light
Driver Information Center
Your vehicle’s Driver Information Center
(DIC) provides vehicle information, vehi
cle warning messages and vehicle fea
ture customization. The DIC messageswill be shown on your instrument panel
cluster display. To operate the DIC, theignition switch must be on.
DIC Buttons
The DIC buttons are located on the right
side of the instrument panel cluster.
(Trip/Fuel):Press this button to
display the odometer, trip odometer, fuel
range, average economy, fuel used,
timer, transmission temperature, instantaneous economy (if equipped) andActive Fuel Management™ indicator
(if equipped).

5
(Vehicle Information):Press
this button to display the oil life,English/Metric units, tire pressure andtire pressure system programming
(if equipped), engine hours and RemoteKeyless Entry programming.
(Customization):Press this button
to customize certain vehicle features toyour preference.
(Set/Reset):Press this button to set
or reset certain vehicle functions as wellas acknowledge DIC messages.
Customization Features
To customize features:
1. With the vehicle in Park, turn on the
ignition.
2. Press the (Customization) button
to display available customizationfeatures.
3. With the desired customization
feature displayed, press the (Set/Reset) button to access thefeature settings.
4.Press the button to scroll through
the available settings.
5. With the desired setting displayed,
press the button to select it.
6. To exit the Feature Settings menu,
press the button until EXITFEA
TURE SETTINGS is displayed and
then press , or press the button or thebutton.
Customization features include:
• Auto Door Lock — Automatically
locks the vehicle doors
• Auto Door Unlock — Automatically
unlocks the vehicle doors
• Remote Door Lock — Type of feed
back from Remote Keyless Entrylocking
• Remote Door Unlock — Type of feed
back from Remote Keyless Entryunlocking
• Delay Door Lock — Delays locking
doors and liftgate after exiting
• Exit Lighting — Amount of time the
exterior lamps remain on after exiting
• Approach Lighting — Exterior lamps
turn on when using Remote KeylessEntry
• Chime Volume — Increases the
volume level
• Park Tilt Mirrors (if equipped) —
Automatically tilts down the outsidemirrors when in Reverse
• Easy Exit Seat (if equipped) —
Automatically moves back the driver’s
seat when the key is removed from
the ignition
• Memory Seat Recall (if equipped) —
Automatically recalls the driver’s seatposition when using Remote KeylessEntry
• Remote Start (if equipped) —
Enables remote vehicle start
• Factory Settings — Sets all features
to the factory default
• Exit Feature Settings

Getting to Know YourYukon/Yukon Denali6
Warnings and Messages
The DIC provides a variety of vehicle
messages (depending on optional equipment) as well as warnings if a problemis sensed in a vehicle system.
To acknowledge a message and clear it
from the display, press any of the DICbuttons. Some urgent messages cannot
be cleared from the DIC display.
If your vehicle is equipped with OnStar
and a warning message appears, youcan press the blue OnStar button and
speak to an OnStar Advisor. In many
vehicles, OnStar Advisors can accesscertain diagnostic information and cantell you how serious the condition is andwhat you should do about it.
See Section 3 of your Owner Manual.
The Remote
Keyless Entry
(RKE) transmitter includes
the followingfunctions:
(Remote
Vehicle Start)
(if equipped): If
your vehicle hasthis feature, itcan be used tostart the engine.
(See Remote Vehicle Start.)
(Lock):Press this button to lock all
the doors. If enabled through the DriverInformation Center (DIC), the parkinglamps will flash once and/or the horn willchirp to indicate locking has occurred.
(Unlock):Press this button to unlock
the driver’s door. If the button is pressedagain within five seconds, all remainingdoors will unlock. If enabled through theDIC, the parking lamps will flash once toindicate unlocking has occurred.
(Liftglass):Press and hold this
button to open the liftglass.
(Power Liftgate) (if equipped):
Press and hold this button to open or
close the liftgate. The taillamps will flashand a chime will sound to indicate theliftgate is activated.
(Vehicle Locator/Panic Alarm):Press this button to locate your vehicle.
The parking lamps will flash and thehorn will sound three times.
Note:Your vehicle’s warnings and mes
sages provide critical information thatcan prevent damage to your vehicle.Review your Owner Manual to becomefamiliar with the information displayedand the action required.
Remote Keyless Entry
SAFETY & SECURITY

7
Press and hold the button to activate the
panic alarm. The parking lamps will flashand the horn will sound for 30 seconds.
Press the button again or turn the ignition to Run to cancel the panic alarm.
See Section 2 of your Owner Manual.
To arm the content theftdeterrent alarm
system, lock the doors using the RKE
transmitter. The security light on theinstrument panel cluster will flash forapproximately 30 seconds to indicate
the alarm is activated. To disarm thesystem, unlock the doors using the RKE
transmitter.
The alarm system will not be armed or
disarmed if the doors are locked or
unlocked with a key, the manual doorlock or the power door lock switch.
See Section 2 of your Owner Manual.
The OnStar system provides invehicle
safety, security and phone services,
available 24 hours a day, 7 days aweek. These services are easily
accessed using the three OnStar
buttons located on the inside rearview mirror.
For more information about OnStar
features, refer to the OnStar Owner’s
Guide and enclosed audio CD in yourglove box.
See Section 2 of your Owner Manual.
The power seat controls for the driver
and front passenger seats are locatedon the outboard side of the seats.
Power Seat: Use the control (A) to
move the seat forward/rearward andup/down as well as to raise/lower thefront or rear of the seat cushion.
Power Recline (if equipped): Use the
control (B) to recline/raise the seatback.
Power Lumbar (if equipped): Use the
control (C) to increase/decrease lumbarsupport and to raise/lower the height ofthe support.
See Section 1 of your Owner Manual.
Power Seat Controls
(if equipped)
A
B
C
Content TheftDeterrent System
OnStar®(if equipped)
COMFORT

9
Adjustable Pedals (if equipped)
The accelera
tor and brakepedals canbe adjusted
to a comfortable and safeoperatingposition byusing the switch located on the centerconsole below the climate controls.
Press the top arrow on the switch to
move the pedals away from you andpress the bottom arrow on the switch tomove the pedals toward you.
The pedals cannot be adjusted when the
vehicle is in Reverse or when cruisecontrol is activated.
See Section 3 of your Owner Manual.
To help block the glare of the sun, the
sun visor can be detached from the cen
ter mount and moved along the sliderod.
See Section 2 of your Owner Manual.
The climate control system includes the
following functions:
(Fan):Turn the fan control knob to
increase or decrease fan speed.
(Off):Turn the fan knob to the Off
position to turn off the system.
(Air Conditioning):Press this but
ton to turn the air conditioning system
on or off.
Sun Visor Adjustment
Manual Climate Controls(Recirculation):
Press this button
to recirculate inside air through the vehi
cle. This mode keeps outside air fromentering the vehicle.
Temperature Control:Rotate the
thumbwheels to raise or lower the temperature setting(s).
AUX (Rear Climate Control):Press this
button to turn the rear climate control
system on or off.
Airflow Modes
Turn the airflow control knob to change
the direction of the airflow. The knob canbe positioned between two modes for awide range of airflow adjustments.
(Vent):This mode directs air to the
instrument panel outlets.
(BiLevel):This mode directs air to
the instrument panel outlets and flooroutlets.
(Floor):This mode directs most of
the air to the floor outlets and some air
to the side window outlets and windshield. Recirculation cannot be selectedin this mode.
(Defog):This mode directs air to
the windshield, floor outlets and sidewindow outlets. Recirculation cannot beselected in this mode.
(Defrost):This mode directs most
of the air to the windshield and some airto the side window outlets. Recirculationcannot be selected in this mode.
(Rear Window Defogger):Press
this button to activate the rear window
defogger. The defogger will shut offautomatically or can be turned off by
pressing the button again.
See Section 3 of your Owner Manual.

13
Setting the Speed Compensated
Volume (if equipped)
With Speed Compensated Volume, the
radio automatically adjusts the volumeto compensate for road noise as vehiclespeed changes.
To set Speed Compensated Volume:
1. Set the radio volume to the desired
level.
2. Press the MENU button to display the
radio setup menu.
3. Press the pushbutton below the auto
volume label on the radio display.
4.Press the pushbutton under the
desired setting (Off, Low, Medium
or High) to select the level ofcompensation.
The compensation will be set once the
display times out after 10 seconds.
Setting the Time
To set the time:
1.Press the (Clock) button. Or, if
equipped, press the MENU button
until the clock option is displayed;
and then press the pushbutton located under the clock option label. The
HR, MIN, MM, DD, YYYY labels will
appear on the display.
2. Press the pushbutton under any of
the labels to be changed.
3.Press the pushbutton again, the right
SEEK arrow or the FWD button toincrease the numbers. Press the leftSEEK arrow or the REV button todecrease the numbers. Rotating theTune knob also will increase or
decrease the selected label.
4. Press the Clock or MENU button
again to set the currently displayedtime and date.
MP3 Capability
Your audio system has MP3 playing
capability. A CDR containing MP3 audiotracks will play automatically when
inserted into the CD player. An MP3symbol will be displayed.
Portable Audio Player
A portable audio player, such as an MP3
player or cassette player, can be connected to the auxiliary input jack locatedon the radio. When connected, the radioautomatically begins playing audio fromthe player over the vehicle speakers.
Radio Data System (if equipped)
When you tune to a Radio Data System
(RDS) station, the station name and callletters will appear on the display instead
of the frequency. RDS stations may alsoprovide the time of day, a program type
for current programming and the nameof the program being broadcast.
RDS features are available for use only
on FM stations that broadcast RDSinformation. RDS relies on receivingspecific information from these stationsand will work only when the informationis available.
See Section 3 of your Owner Manual.

17
This feature allows you to start the
engine from outside the vehicle by using
the Remote Keyless Entry (RKE) trans
mitter. The remote start capability mustbe turned on using the Driver
Information Center.
The vehicle’s automatic climate control
system (if equipped) will default to aheating or cooling mode based onoutside temperature, and the manualclimate control system will turn on at
the same setting as when the vehicle
was last turned off.
Starting the Vehicle
To remote start the vehicle:
1.
Aim the RKE transmitter at the vehicle.
(Transmitter range is within approximately 200 feet of the vehicle.)
2. Press and release the (Lock)
button on the transmitter.
3. Immediately press and hold the
(Remote Start) button for about four
seconds. When the vehicle starts, theparking lamps will turn on. The engine
will continue running for 10 minutes.
4.Repeat these steps for a 10minute
time extension. Only two consecutive
remote starts are allowed.
When you enter the vehicle after a
remote start, the key must be insertedinthe ignition and turned to the Run
position before driving.
Canceling a Remote Start
To turn off the engine instead of driving
after a remote start:
• Press and hold the (Remote Start)
button until the parking lamps turn off.
• Press and release the Hazard
Warning Flashers button. Press it
again to turn off the flashers.
• Turn the key in the ignition switch to
the Run position and then off.
See Section 2 of your Owner Manual.
The power running boards extend from
beneath the vehicle when any side door
is open. The vehicle must be stationary
for the running boards to operate. Todisable the running boards, press the
(Running Boards) disable button on
the instrument panel. Press the button
again to turn the running boards back on.
See Section 2 of your Owner Manual.
The turn signal lever includes an auto
matic lane change signal feature.
To signal a lane change, raise or lower
the lever until the arrow on the instrument panel cluster starts to flash, and
then release the lever. The turn signalwill automatically flash three times. If the
Tow/Haul mode is selected, the turn signal will automatically flash six times.
See Section 3 of your Owner Manual.
Remote Vehicle Start
(if equipped)
Note: Remote Vehicle Start will not
operate if the key is in the ignition, thehood or liftgate is open, or the Check
Engine light is illuminated on the instru
ment cluster.
Auto Turn Signal
Power Running Boards
(if equipped)

Getting to Know YourYukon/Yukon Denali20
(Dome Lamp Override):Press this
button to turn the dome lamps on or offwhen the doors are open.
See Section 3 of your Owner Manual.
The 2ndrow seats fold and tumble to
provide more cargo space and access tothe 3rdrow seats.
To fold and tumble the seat:
1. Make sure nothing is under or in front
of the seat.
2. Fold the seatback forward by lifting
the release lever located at the bot
tom rear of the seatback on the out
board side of the seat.
3. Tumble the seat forward by lifting the
release lever again.
To unfold the seat:
1.Pull down the seat until it latches to
the floor.
2.Lift up the seatback until it locks in
place. Pull on the seatback to makesure it is locked.
Power Release Seats (if equipped)
To fold and tumble the power release
seat:
1. Shift the vehicle into Park.
2. Make sure nothing is under or in front
of the seat.
3. Press one of
the automatic
release buttons, located
on the overhead consoleand on the panel behind the rear
doors. The seat will fold and tumble
forward automatically.
The seat must be unfolded manually to
return it to the sitting position.
See Section 1 of your Owner Manual.
The split rear seats fold and tumble to
provide more cargo space.
To fold and tumble the seat:
1. Make sure nothing is in front of the
seat.
2. Fold the seatback forward by lifting
the release lever (A) located at thebottom rear of the seatback on theoutboard side of the seat.
3.Tumble the seat forward by lifting the
release lever (B) located to the left of
the handle on the center rear of theseat.
4. Tilt the seat fully forward and lock it in
place.
To unfold the seat:
1.Lower the seat by lifting the release
lever located to the left of the handleon the center rear of the seat.
Folding 2ndRow Seats
Folding 3rdRow Seats
BA

21
2. Pull down the seat until it latches to
the floor.
3. Lift up the seatback until it locks in
place. Pull on the seatback to makesure it is locked.
See Section 1 of your Owner Manual.
Use the Remote Keyless Entry (RKE)
transmitter or the power door lockswitches to unlock the liftgate.
Liftgate:Press the touchpad (A) on
the back of the handle in the center ofthe liftgate; then pull up the liftgate toopen it.
Liftglass:Press the touchpad (B) on the
liftgate, located above the right side ofthe license plate, or use the RKE trans
mitter to unlatch the liftglass.
Power Liftgate (if equipped)
There are several ways to open and
close the power liftgate:
• Press and hold the power liftgate but
ton on the RKE transmitter until theliftgate starts moving.
• Press the touchpad on the liftgate
handle to open.
• Press the button on the bottom of the
liftgate to close.
•Press the (Power Liftgate) switch
on the overhead console inside thevehicle.
To turn off the power liftgate function,
press the (Power Liftgate Off) switchon the overhead console.
See Section 2 of your Owner Manual.
The open/close and vent switches for
the power sunroof are located on the
overhead console. The open/closeswitch has two detents.
(ExpressOpen):Press the rear of
this switch completely (to the second
detent) to expressopen the sunroof. Tostop the sunroof, press the switch again.
To partially open the sunroof, lightly
press and hold the rear of the switch (tothe first detent) until the sunroof reachesthe desired position.
(ExpressClose):Press the front of
this switch completely (to the seconddetent) to expressclose the sunroof. To
stop the sunroof, press the switch again.
To partially close the sunroof, lightly
press and hold the front of the switch (tothe first detent) until the sunroof reachesthe desired position.
(Vent): Press the rear of this switch
to vent the sunroof. Press the switchagain to stop the sunroof.
Press and hold the front of the switch
toclose the sunroof.
See Section 2 of your Owner Manual.
Liftgate and Liftglass Operation
AB
Sunroof (if equipped)

Getting to Know YourYukon/Yukon Denali22
This feature uses ultrasonic sensors on
the rear bumpers to help you avoid col
liding with objects when parking the
vehicle. It operates only at speeds lessthan 3 mph.
The rear parking assist display is locat
ed near the rear window. The lights onthe display provide distance information.Lowtoned beeps play out of the rearspeakers (for objects near the rearbumper).
To turn off the system, press the disable
button located below the climate con
trols on the instrument panel. The indi
cator light will illuminate when the system is off.
See Section 3 of your Owner Manual.
The Universal Home Remote is a com
bined universal transmitter and receiverthat can activate up to three devices,such as garage door openers, entrydoor locks, gates and security systems.
It’s recommended that you read the
instructions in your Owner Manual com
pletely before attempting to program anyof the three channels on the Universal
Home Remote. The engine should be
turned off when programming theremote.
See Section 2 of your Owner Manual.
Ultrasonic Rear Parking Assist
(if equipped)
StabiliTrak is an advanced computer
controlled vehicle stability and tractionenhancement system that assists withdirectional control of the vehicle in
difficult driving conditions. It turns onautomatically every time you start your
vehicle.To limit wheelspin and help maintain directional control, you shouldalways leave the system on. However, if
your vehicle becomes stuck and rocking
StabiliTrak®– Stability Control
System (if equipped)
PERFORMANCE & MAINTENANCE
Universal Home Remote
(if equipped)
Note: Do not use the Universal Home
Remote with any garage door opener thatdoes not have the “stop and reverse” fea
ture or any opener manufactured beforeApril 1, 1982.
6Speed Automatic
Transmission Controls (Denali Models only)
The 6speed automatic transmission has
a unique gear range selection modecalled Driver Shift Control that enablesthe driver to select the range of gearsdesired for the current driving conditions,such as when driving on downhill grades.
To use this feature, move the shift lever
to the Manual (M) position and select alower or higher driving gear using the
+ / – button on the shift lever. The dis
play on the instrument panel cluster will
show the current gear selection.
Press the – (minus) side of the button to
downshift. When slowing to a stop, thevehicle will automatically downshift.
Press the + (plus) side of the button to
upshift. As vehicle speed increases, youwill need to manually upshift.
If current vehicle speed is too high or
too low for the requested gear, the shift
will not occur.
See Section 2 of your Owner Manual.