lumbar support GMC YUKON 2009 Get To Know Guide

Manual Lumbar
(if equipped): The
knob is located
on the front of the
driver’s seat lower
cushion on the out-
board side. Turn the
knob forward to increase, and rearward
to decrease, lumbar support.
See Section 1 of your Owner Manual.
7
The power seat controls for the driver
and front passenger seats are located
on the outboard side of the seats.
Power Seat: Use the control (A) to
move the seat forward/rearward and
up/down as well as to raise/lower the
front or rear of the seat cushion.
Power Recline (if equipped): Use the
control (B) to recline/raise the seatback.
Power Lumbar (if equipped): Use the
control (C) to increase/decrease lumbar
support.
Power Seat Controls
(if equipped)
COMFORT
For Remote Door Unlock or Stolen
Vehicle Location Assistance, call
1-888-4-ONSTAR (1-888-466-7827).
Press the OnStar button for more details
and to provide an OnStar Advisor with
your license plate number and emer-
gency contact information. For more
information, refer to your OnStar
Owner’s Guide or visit onstar.com.
See Section 2 of your Owner Manual.
A
B
C
Heated Seats (if equipped)
To operate the heated seats, the engine
must be on. The heated seat operation
turns off when the ignition is turned off.
Front Seats
The heated front seat controls are locat-
ed on the front doors.
(Heated Seatback):Press the top
button to turn on the heated seatback.
(Heated Seat/Seatback):Press the
bottom button to turn on the heated seat
and seatback.
Continue to press the desired button to
cycle through the temperature settings
of High (three indicator lights), Medium
(two indicator lights), Low (one indicator
light) and Off (all indicator lights are off).