tow bar GMC YUKON 2009 Get To Know Guide

The accelerator
and brake
pedals can be
adjusted to a
comfortable and
safe operating
position by using
the switch located on the center console
below the climate controls.
Press the top arrow on the switch to
move the pedals away from you and
press the bottom arrow on the switch
to move the pedals toward you.
The pedals cannot be adjusted when the
vehicle is in Reverse or when cruise
control is activated.
See Section 2 of your Owner Manual.
Getting to Know Your Yukon/Yukon Denali8
Memory Settings (if equipped)
Adjustable Pedals (if equipped)
2nd-Row Seats
The heated rear seat controls are on the
rear control panel, located on the back
of the floor console.
(Heated Seat):Press the button
to turn on the heated seat and cycle
through the temperature settings.
See Section 1 of your Owner Manual.
Heated and Cooled Seats
(if equipped)
The following heated and cooled front
seat controls are located on the front
doors:
(Heated Seat):Press the bottom
button to turn on the heated seat.
(Cooled Seat):Press the top button
to turn on the cooled seat.
Continue to press the desired button to
cycle through the temperature settings
of High (three indicator lights), Medium
(two indicator lights), Low (one indicator
light), and Off (no indicator lights).
See Section 1 of your Owner Manual.
The memory buttons are located on
the driver’s door. Settings can be
programmed for the driver’s seat (the
lumbar setting is saved only on vehicles
equipped with cooled seats), outside
mirrors and the adjustable pedals
(if equipped) for two drivers.
To save memory settings:
1. Adjust the driver’s seat, outside
mirrors and pedals to a comfortable
position.2. Press and hold button 1 or 2 until two
beeps sound.
Repeat these steps for a second driver.
To recall the settings, press memory
button 1 or 2 with the vehicle in Park.
If the Remote Keyless Entry transmitter
is used to enter the vehicle and the
memory seat recall feature is on (see
Customization Features), the settings
will be recalled automatically.
Easy Exit Seat
The easy exit seat button is located
between the two memory buttons.
With the vehicle in Park, press the
(Easy Exit) button to move the driver’s
seat to the exit position.
If the easy exit seat feature is on (see
Customization Features), automatic seat
movement will occur when the key is
removed from the ignition.
See Section 1 of your Owner Manual.