reset GMC YUKON XL DENALI 2005 Owners Manual

Getting Started
Before you begin to operate the navigation system, read
this manual thoroughly to become familiar with it and
to understand how the system works.
The navigation system allows you to do the following:
Plan a route with provided turn-by-turn route
and map guidance with voice prompts.
Select a destination using various methods
and choices.
The information in the system may not always be
complete. Road conditions such as prohibited turns,
detours, and construction zones, change frequently.
It is important to consider whether you can follow
the directions given by the system for the current
conditions.
When getting started, you may set the navigation system
to your preference using various options. You will also
need to know how to perform various functions to begin
route guidance. Reference the following topics for
further information:
Setting Radio Station Presets
To set preset radio stations, do the following:
1. Press the power/volume knob to turn the audio and
navigation system on.
2. Press the BAND hard key to access the band menu
and select the desired band. You may choose
between AM, FM1, FM2, and XM1, and XM2
(if equipped).
3. Use the tuning knob or the SEEK hard key arrows
to select a station.
4. Touch and hold one of the six screen buttons at the
bottom of the screen until you hear a beep or see
the station displayed on the selected preset button.
Setting the Time
To set the time, do the following:
1. Press the power/volume knob to turn the audio and
navigation system on.
2. Press the CONFIG hard key.
3. Touch the Clock screen button.
4. Touch the appropriate Time Zone screen button.
5. Touch the Daylight Savings screen button.
The time is now set. Touch the Manual Adjust screen
button if you need to further adjust the time. The radio will
use the GPS satellite to set the time. The vehicle needs
to be in an open area to receive the signal.
1-4

Entering an Address, Point of Interest,
Home and Preset Destinations
Before you enter an Address, Point of Interest, Home or
any Preset Destination, you must select the appropriate
search area that contains the nal destination you
wish to enter. Your vehicle must be stopped to perform
this operation.
Setting the Search Area
To set the search area, do the following:
1. Press the power/volume knob to turn the audio and
navigation system on.
2. Insert the DVD map disc into the radio CD slot.
3. A notice may appear. Touch the NEXT screen
button to proceed.
If the radio is already on with a map disc inserted,
push the NAV hard key.
4. Touch the DEST screen button.
5. Touch the Change screen button.
6. Touch the appropriate Search Area numbered
screen button that contains your nal destination.
You will automatically be returned to the
Destination menu.
Entering an Address
You can set a destination by entering a street address.
To enter an address, do the following:
1. Press the power/volume knob to turn the audio and
navigation system on.
2. Insert the DVD map disc into the radio CD slot.
3. A notice may appear. Touch the NEXT screen
button to proceed.
If the radio is already on with a map disc inserted,
push the NAV hard key.
4. Touch the DEST screen button located in the lower
left corner of the map.
5. Verify that the selected Search Area is correct.
6. Touch the Address screen button.
7. Enter the street name using the alpha keypad on
the screen.
Do not enter directional information or street type,
and be sure to use the space symbol screen button
(
U) between street or city names. For example,
the street name N. Royal Oak Rd. should be entered
as royal
Uoak. Use the backspace (V) screen
button for misspellings.
1-5

Setting Home Destination
1. Press the power/volume knob to turn the audio and
navigation system on.
2. Insert the DVD map disc into the radio CD slot.
3. A notice may appear. Touch the NEXT screen
button to proceed.
If the radio is already on with a map disc inserted,
push the NAV hard key.
4. Touch the Nav
y(navigation) menu screen button.
5. Touch the Memory Points screen button.
6. Touch the Register Home screen button.
7. Touch the Address screen button and then enter all
address information.
8. Touch the Register Point screen button to store the
home address as a memory point.
Setting Preset Destinations
1. Press the power/volume knob to turn the audio and
navigation system on.
2. Insert the DVD map disc into the radio CD slot.
3. A notice may appear. Touch the NEXT screen
button to proceed.
If the radio is already on with a map disc inserted,
push the NAV hard key.
4. Touch the Nav
y(navigation) menu screen button.
5. Touch the Memory Points screen button.
6. Touch the Register screen button located under the
Preset Dest column.
7. Touch one of the ve preset buttons.
8. Touch the Address screen button and then enter
the address information.
9. Touch the Register Point screen button to store the
memory point.
1-7

Using Your Home or Preset
Destinations
These destinations are available for selection
while driving.
1. Press the power/volume knob to turn the
audio and navigation system on.
2. Insert the DVD map disc into the radio CD slot.
3. Touch the DEST screen button.
4. Touch the
L(Home symbol) or one of the available
Preset Destination symbols at the bottom of the
Destination screen.
5. Once you begin driving, or if you are already
driving, you will hear an audio prompt to “Proceed
to the highlighted route.” You are now in route
guidance mode.
Canceling Guidance
Guidance will be canceled once you arrive at your nal
destination. To cancel guidance prior to arrival at the
nal destination, do the following:
1. From the map screen, touch the Nav Options
screen button.
2. Touch the Cancel Route screen button.
3. Touch the Yes screen button to conrm
cancellation.
1-8

Map Color (Night):This feature allows you to adjust
the nighttime map appearance. Choose between
Normal, Auto, 1, 2, 3, or 4. The numbered settings vary
the color scheme of the map display. The Auto setting
will change the map appearance automatically every
three months. When the desired color setting has been
selected, press the NAV hard key to view the adjusted
map color.
Calibrate System?:This feature will calibrate wheel
speed to assist in the calculation of vehicle position.
This feature also allows you to manually reposition the
vehicle symbol on the map. You may need to calibrate
the system following a tire change, rotation, or if
your vehicle has been relocated a great distance.
Touch the Yes screen button to calibrate the system, or
the No screen button to leave the calibration as it is.
Select Defaults?:This feature allows you to restore
all available factory default settings in the Nav Setup
menu. Touch the Yes screen button to restore defaults,
or the No screen button to retain the current settings.Memory Points
Touching the Memory Points screen button will display
the Memory Points menu. This menu contains options
for registering, deleting, and editing marked points
stored in memory, such as memory points, preset
destinations, and areas to avoid.
Memory Points:Choosing to add a memory point will
take you to the Destination menu. You may register up to
30 memory points. The name, location, information, and
icon for a memory point may also be edited.
2-14

Preset Dest (Destination):Five preset destinations,
as well as one for home, may be registered or
edited. The ve preset destinations, home, and
Emergency are the only destination selections available
from the Destination menu while the vehicle is moving.
These presets are shown as the home symbol and
numbered presets 1 through 5 at the bottom of
the Destination menu. SeeDestination on page 2-16
for more information on how to register Memory Points
and preset destinations.
Areas to Avoid:Up to 10 areas to avoid may also be
registered from the Memory Points menu. Areas to
avoid include areas such as a high traffic area,
construction area, or any main road or intersection you
wish to avoid. When registering or editing an area to
avoid, the size of the area may also be increased
or decreased by touching the up or down arrow screen
buttons on the scroll bar.
Register Home:Touch this screen button to get
access the Register Home screen. Choose a method of
destination entry and enter the destination you would
like to store as home. Once your entry is complete,
touch the Register Point screen button to store this point
as home. Each time you touch the home symbol from
the bottom of the Destination screen, this destination
will be calculated.Once you have stored a destination as home, the
Register Home screen button will change to read
Delete Home. You may then touch this screen button to
delete the destination you have stored as home.
Del. Prev. Dest. (Delete Previous Destination):
Touch this screen button to delete a previous
destination. A list of previous destinations will be
displayed on the Delete Previous Dest screen. Touch
the screen button next to the previous destination
you wish to delete. You will be asked to conrm your
decision. Touch the Yes screen button to delete
the destination or touch the No screen button to cancel
the deletion.
You may also touch the Del. All screen button from the
Delete Previous Dest screen to delete all previous
destinations listed. You will be asked to conrm this
decision as well. Touch the Yes screen button to delete
all previous destinations or touch the No screen
button to cancel the deletion.
2-15

Change:If you need to see a more detailed search
area map with a list of states, or to change the search
area, touch the Change screen button. The Search
Area screen will appear. Touch the numbered screen
button to the left of the map that corresponds with
the numbered region you wish to choose.
Delete Dest (Destination):Touch the Delete Dest
screen button from the Destination menu to delete the
current destination.
Once your destination entry is complete, regardless of
which method of entry you used, a screen with the
destination preview menu will be displayed. See
“Destination Preview Menu” later in this section for
more information.Once you have entered the Destination menu, you can
touch the up or down arrow screen buttons to the
left of the menu options to scroll through the pages
of the menu.
To enter a destination, choose from one of the following
destination entry methods:
Preset Destinations
The preset destination entry method allows you to
select destinations that were registered as presets
1 through 5.
These presets, along with the home symbol preset,
are located at the bottom of each page of the
Destination menu. Besides the home preset destination
and Emergency destination entry method, these are
the only presets available for selection while the vehicle
is moving.
2-17

Memory Points
The Memory Points destination entry method allows you
to select a destination by choosing from a list of
marked points on the map that were previously marked.Memory points include up to 30 saved points, ve preset
destinations, and a home location. Selecting the
Memory Points screen button from the Destination
screen allows you to select any one of the marked points
as the active destination. Marked points can also be
sorted by icon, date saved, or alphabetically.
If you choose to register a memory point, you will be able
to select an icon to correspond with that memory point.
You will be given a screen with several icons to choose
from. You can also choose to register that memory point
by using a sound, which you select. To choose a sound,
touch the With Sound screen button.
See “Memory Points” underNavigation Menu on
page 2-7for more information.
2-21

Previous Destination
The Previous Destination entry method allows you to
select a destination by choosing from a list of previously
entered destinations.
Touch the number next to the desired previous
destination to select it.
Emergency
The Emergency destination entry method allows you
to select a destination by choosing from a list of
emergency facilities. The list will vary by area.
Selecting Police Station or Hospital will display a list.
The list can be changed to appear in alphabetical order,
or in order by distance. Besides the home preset
destination and preset destinations 1 through 5,
Emergency is the only destination entry method
available for selection while the vehicle is moving.
2-22

Navigation Audio System
Notice:Before adding any sound equipment to
your vehicle, like a tape player, CB radio, mobile
telephone, or two-way radio, make sure that it can
be added by checking with your dealer. Also,
check federal rules covering mobile radio and
telephone units. If sound equipment can be added,
it is very important to do it properly. Added
sound equipment may interfere with the operation
of your vehicle’s engine, radio, or other systems,
and even damage them. Your vehicle’s systems may
interfere with the operation of sound equipment
that has been added improperly.
Your vehicle has a feature called Retained Accessory
Power (RAP). With RAP, the audio system can be
played even after the ignition is turned off. See
“Retained Accessory Power (RAP)” in Section 2 of
your vehicle’s owner manual for more information.
The audio system is operated using navigation system
menus. The audio menus are explained in this section.
Playing the Radio
O
(Power/Volume):Press this knob to turn the audio
and navigation systems on and off. Turn the knob to
increase or decrease the volume.
Finding a Station
BAND:Press this hard key to access the BAND screen
and to switch between AM, FM1, FM2, XM1, and
XM2, if equipped.
Tuning Knob:Use the tuning knob on the lower
left corner of the navigation system to choose a
radio station.
wSEEKx:Press the SEEK up or the down arrow to
go to the next or previous station and stay there.
To scan stations, press and hold the SEEK up or down
arrow for two seconds until you hear a beep. The radio
will go to a station, play for a few seconds, then go
on to the next station. Press either SEEK arrow again
to stop scanning.
To scan preset stations, press and hold the SEEK up or
down arrow for more than four seconds. You will hear
two beeps and PSCAN will be displayed, along with
the highlighted preset. The radio will go to one of
the preset stations, play for a few seconds, then go on
to the next preset station. Press either SEEK arrow
again to stop scanning presets.
The radio will only seek and scan stations with a strong
signal that are in the selected band.
3-2