air GREAT WALL DEER 2006 Repair Manual

BE-22Body Electric System
Lighting System
Small lamp system
SF
fuse
small lamp switch
10
ON
OFF
8
front small lamp
rear small lamp
license lamp
instrument lighting system
defroster switch lamp
alarming switch lamp
front fog-lamp switch lamp
rear fog-lamp switch lamp
tail-door switch lamp
CD switch lamp
air-conditioner panel lamp
cigarette lighter switch lampfront fog lamp switchON
OFF
6
rear fog-lamp switchONOFF
N
front fog lamp indicating lamp
front left fog lamp
front rear fog lamp
rear fog lamp indicating lamp
left rear fog lamp
right rear fog lamp
combined switch
front fog lamp switch
rear fog-lamp switch
1 2 3 4
65 1 2 3 4 5 6
7 8 9 10 1 2
3 4 5
8 9 10 11 12
19 18 17 16 15 6 7
13 14
21 20
battery
small lamp relay foglamp relay

BE-26Body Electric System
Lighting System
Inspection on Common Failure
FailurePossible Causes Repairing approaches Remark
Only one lamp doesn
t work Burn off bubble
Grounding failure of socket or wiringChange the bubble
Make reparation as required.
Abnormal steering signal Burn off horn fuse Change the fuse and check to see Dr SF
whether there is short circuit
Failure of steering signal flasher Check the flasher
Failure of steering signal/alarming switch Check the switch
Wiring or groun ding failure Make reparation as required. One side of the steering Failure of steering signal switch Check the switch
signal doesnít flash Wiring or grounding failure Make reparation as required. Alarming lamp doesn
t Change the fuse and check to see Change the fuse and check Dr SF
workBurn off horn fuse whether there is short circuit
Failure of steering signal flasher Check the flasher
Failure of steering signal/alarming switch Check the switch
Wiring or grounding failure Make reparation as required. The front combination Burn off fuse Change the fuselamp don
t work
Failure of large lamp relay Check the relay
Failure of combinationswitch Check the switch
Wiring or grounding failureMake Make reparation as required
Burn off fuse in tail lamp Change the fuse and check
whether there is short circuit
Burn off maxi-fuse Change the maxi-fuse;
Failure of combined switch Check the switch;
Wiring or grounding failure Make reparation as required. Upper beam lamp doesn
t work Failure of combination switch Check the switch
Wiring or grounding failure Make reparation as required
The rear combined tail lampand
license lamp don
t work

BE-32Body Electric System
Combination Instrument
Combination instrument
Electric circuit diagram

  



^N ^NS _N _ N P
DraêaáÉëÉärear fog lamp indicating lamp
rear window/defroster indicating lamp
upper beam indicating lamp
front fog-lamp indicating lamp
A13
B3

connected
with
negative
pole
A10
connected
with
positive
pole
A2
connected
with
negative
polewater
thermometer
tachometer
speedometerconnected with sensor
connected with revolution signal
connected with sensor anode
connected with sensor
fuel gauge
connected with sensor
braking liquid level indicating lamp
parking brake indicating lamp
safety airbag indicating lamp
low oil pressure indicating lamp
engine failure indicating lamp
four wheel drive indicating lamp
generator preheating indicating lamp
fuel alarming indicating lamp
accumulator charging indicating lamp
ABS failure indicating lamp
left turn indicating lamp
right turn indicating lamp
instrument interior
lighting lamp
liquid crystal back-light lamp
A1A16 B1 A5 A6A7 A8 A9 B6 B8 B9B10 B11A12 B4
A15
A14
A10
connected
with
positive
pole
A3
A4
B12
B13
B5
A13
B3

connected
with
negative
pole
A10
connected
with
positive
pole
A2
connected
with
negative
pole
liquid crystal back-light lampinstrument interior
lighting lamp
rear fog lamp indicating lamp
upper beam indicating lamp
front fog-lamp indicating lamp
water
thermometer
tachometer
speedometer
fuel gaugeconnection with sensor
connected with revolution signal
connected with sensor anode
connected with sensor
connected with sensor
oil-water separation indicating lamp
safety belt indicating lamp
parking brake indicating lamp
braking liquid level indicating lamp
low oil pressure indicating lamp
engine failure indicating lamp
four wheel drive indicating lamp
generator preheating indicating lamp
fuel alarming indicating lamp
accumulator charging indicating lamp
ABS failure indicating lamp
left turn indicating lamp
right turn indicating lamp
A1 A16 B1
A5 A6 A7A8
A9 B6 B8
B9 B10
B11 A4A12 A14 A15B4
A10
connected
with
positive
pole
A3
B12
B13
B5

BE-33Body Electric System
Combination Instrument
Electric circuit diagram (continued)
SF
A3 connected
with negative pole
A1 connected
with positive pole
B8 connected
with negative
pole
B7connected
with positive
pole
A4 connecting
with lighting
switch
A6 connected
with negative
pole
pressure-regulating
potential deviceirect-current
power supply
5-9Vdrive power
supply
110VEL
luminous
plate
left turn indicating lamp
right turn indicating lamp
upper beam indicating lamp
rear fog lamp indicating lamp
rear window/defroster indicating lamp
front fog-lamp indicating lamp
water
thermometer
tachometer
connected with sensor
connected with revolution signal
speedometer
digital clock
fuel gaugeconnect to the cathode of sensor
connected with sensor anode
connected with sensor
connected with sensor
back door indicating lamp
parking brake indicating lamp
safety airbag indicating lamp
low oil pressure indicating lamp
engine failure indicating lamp
four wheel drive indicating lamp
generator preheating indicating lamp
fuel alarming indicating lamp
accumulator charging indicating lamp
ABS failure indicating lamp75
B9
B2 A15 B1 A9 B11 B10
A14 B4 B6 A12
B14 connected
with positive
pole
B7 connected
with positive
pole
A11 A5A7 B12B5 B13 A16A13 B16 B15
A2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
In this drawing, A stands for the white plugging
elements, B for black plugging elements, they
use the same numerical order.
instrument
plugging element

BE-38Body Electric System
Backup Radar System
Inspection on Common Trouble
Failure Judgment Methods
No backup radar display (no
system start notification when
the reverse gear is engaged)Check whether the plugging elements of power supply
of back up radar control box are in well connection as
shown in drawing H in next page.(when the reverse
gear is engaged, touch the detector, if there is vibration,
which shows the detector is powered.
Check whether the wire harness of inner mirror in
electric room and that on the top of body are in well
connection as shown in the drawing A in next page
Check whether the wire harness of back up radar
control box is well connected with that of chassis
and that on the top of body.
Rotate the vehicle key to the ACC position and
engage the reverse gear, then measure to see whether
the back up power supply reaches to 12 V with the
multi-meter of 50 V of voltage, refer to the
red
and black
positions shown in the drawing in next
page.
If the voltage reaches 12 V, change the backup
radar control box in trial firstly, then the inner
mirror in electric room, finally change the roof
wire harness and the chassis.
No backup radar display (but
there is start notification when
the reverse gear is engaged)
remark: such trouble occur
under the blocking condition.Check whether the power supply of back up radar
is well located, see the red and position in the
drawing of next page.
Check and align the plugging element.Poor properties of ultrasonic wave
Change the ultrasonic detector heads.
Continuous back up radar red
lamp alarming (remark: there
is no obstacle within 0.5 m away
from the detector head)Check whether the detectors in the two circuit of
back up radar control box is well plugged, see the
marked positions F, G in the drawing of next page.
Check and well connect those plugging elements
Poor connection of the left/right ultrasonic detector head
Poor performance of back up radar control box.Check and well connect those plugging elements
Change the ultrasonic detector head
Change the back up radar control box.
Vehicle modelpc
Alarming by mistake
The rear standby tire is removedConduct the inspection operation for the rear
standby tire at the spacious place
fail to detect the obstacle
The detector head doesn
t workChange the detector head
There is dirt on detector headClean the detector head
Rear standby tire inspection1. engage the reverse gear for five times repeatedly within ten seconds at the spacious place so that the red
lamp on the screen flash three times, the system will automatically remember the standby tire status.
2. When the body height varies or the stand by tire is opened, make a new inspection for the rear stand by
tire to ensure the backup radar in normal operation.
Seven section of lamp display
Column I
1.49m-1.3m Column II
1.29m-1.1m
Column III
1.09m-0.9m Column IV
0.89m-0.75m
Column V
0.74m-0.6m column VI
0.59m-0.45m
Column VII

0.45m
Remark: the right and left LED display the direction and distance of obstacle respectively for driver
reference.If the voltage fails to reach 12 v, check the power
supply system of original vehicle
s large wires
to restore the voltage to 12 V.
Vehicle model SL SK
fail to detect the obstacle
Trouble description Repairing and treatment approaches

BE-45Body Electric System
Wiping and Washing System
Inspection on Common Trouble
Trouble Possible causes Repairing approaches
Make reparation as required;
Check the washer motor;
Check the brusher switch;
Make reparation as required. Washer has no action The washer hose or nozzle is blocked;
Failure of washer motor;
Failure of washer switch;
Wiring failure.Failure of motor switch;
Check the brusher switch;
Make reparation as required. Brusher has no action at the
intermissive gearFailure of brusher switch;
Wiper or grounding failure;
Check the wiping motor.Failure of brusher motor;
Brusher or grounding failure;
Check the brusher motor;
Make reparation as required. Burn out of brusher fuse;
Failure of brusher switch;
Change the fuse and check whether there
is short circuit;
Check the brusher switch. Brusher cannot move or cannot
return to the stop position

BE-60
Inspection on Common Trouble
Trouble Possible causes Repairing approaches
Burned out fuse Change and check whether there is
short circuit
Wiring failure
Seize-up of electric rocker gear
or mechanical lock
Failure of brush-rocker or lock
out deviceMake reparation as required.
Make reparation as required.
Change
The indicating lamp of electric rocker gear
switch doesn
t workWiring failure
Failure of indicating lamp locates
interior side of switchMake reparation as required.
Change
There is no electricity in the Change the cell
remote controller
Both remote controller cannot
control the CCL
Glass cannot raise automatically after the
car door is locked (top SY SJ)Wiring failure
Failure of Control case of CCL
Brush-rocker switch failureMake reparation as required.
Change
Change
Body Electric System
CCL and Electric rocker Gear System
Electric rocker gears at four
doors don
t work
The CCL at four doors don
t work Burned out fuse Change and check whether there is
short circuit
The electric rocker gear or
CCL at one
door doesn
t work
One remote controller cannot c
ontrol the CCL
Controller box damage Change

BE-63
Trouble Possible causes Repairing approaches Page
Receiver
CD recorderLack of power supply Burned out fuse
Wiring failureChange the fuse and check whether there is
short circuit;
Make reparation as required
Loudspeaker doesn
t work Faalure of loudspeaker
Wiring failureChaange the loudspeaker;
Make reparation as required.
Do not read the tape or disc Receiver failure or Change the receiver or CD recorder
CD recorder failure
AM or FM doesn
t work Receiver or CD recorder failure Change the receiver or CD recorder
VCD Non-opening of devices Aerial failure
Wiring failure
Main machine failureChange or repair it as required;
Make reparation as required.
Change the main device
Neither image nor sound is
broadcastedFailure of main device;
converter box failure plus disc box
failureMake inspection as required and change
the parts with failure
No image when backing up Wiring failure
Failure of video cameraConduct an inspection as required and
change the parts with failure
FM/TV failure Failure of aerial amplifier
Weak signal from TV station
Make an inspection as required and change
the parts with failure
Screen cannot be turned over Unsuitable main device adjustment
Failure of main deviceAdjust according to the application
instruction;change the main device
Disc box cannot be pushed Failure of disc box Make an inspection as required
outside
Bass speaker doesn
t work Wiring failure
Failure of bass speakerMake reparation as required.
Change the bass speaker.
Electric
aerialNon-raising when receiver is
openedWiring failure
Failure of electric aerialMake reparation as required.
Change the electric aerial
Falling seize-up Wiring failure
Failure of electric aerial.Make an inspection as required and change
the parts with failure.BE-64
BE-64
BE-64
BE-65
BE-65
Inspection on Common Trouble
Body Electric System
Acoustical Equipment System

BE-68Body Electric System
Wire Harness Distribution
Housing wire harness
1 back-up lamp switch
2 starter
3 starter
4 oil pressure sensor
5 grounding wire
6 grounding wire
7 connected to protective box II
8 protective box II
9 connected to protective box II
10 starter11 air-conditioner compressor12water temperature sensor
13 washer motor
14 right headlamp
15 right lever-shaped lamp
16 electric horn
17 generator
18 left headlamp
19 left lever-shaped lamp
20 front turn lamp of left side
21 connected to protective box I
1
2
P
4 5 6 7
8
V
1011
12
13
14
NR1617
18
192021
Wire harness distribution
aê

BE-69
SL SK SY SJ
1 connected to cab wire harness
2 connected to cab wire harness
3 odometer sensor
4 back-up lamp switch
5 turn lamp on right side
6 grounding wire
7 brush motor
8 protective box II
9 wire connecting with accumulator anode
10 wire connecting with accumulator anode
11 electromagnetic fan
12 washer motor
13 right fog lamp
14 right turn lamp
15 right headlamp
16 right small lamp17 horn electric horn
18 left turn lamp
19 left small lamp
20 left headlamp
21 left fog lamp
22 pressure switch of air-conditioner
23 generator
24 generator
25 grounding wire
26 turn lamp on left side
27 brake liquid level sensor
28 connected to cab wire harness
29 connected to cab wire harness
30 connected to cab wire harness
31 flasher relay
1
O
3
4
5
6
7
8
9
10
11
12
13
14
151617
18
19
20 21222324252627282930
31
Housing wire harness (continued)
Body Electric System
Wire Harness Distribution