door lock GREAT WALL PEGASUS 2006 Owner's Guide

B0-13
Adjustment of Rear Door
(Dr SL SK SF SY SJ)
1. Adjust the door along the front-back and vertical direction;
(upper side)
Screw off the hinge nuts on the body side for the adjustment.
(lower side)
Screw off the hinge nuts on the side body for the adjustment.
2. Adjust the door along the left-right and vertical direction.
3. adjust the door lock clip
(a) Screw off the mounting bolts of lock clip and tap the lock
clip with hammer to adjust its position.
(b) Screw on the fixing nuts of lock clip.
Disassembly of Rear Door
1. Tear down the elevator handle (Dr)
Pull out the spring snapping ring with dishcloth and tear down
the elevator handle and sleeve.
2. Tear down the indoor handle;
(a) Take spart the screw and slide the handle forwardly.
(b) Take down the handle from the controlrod Vehicle Body
Rear Door

B0-16
(SJ)
(a) Tear down the four fixing bolts of elevator bracket;
(b) Tear down fixing bolts of three elevators;
(c) Disassemble the elevator through the auxiliary hole. Vehicle Body
Rear Door
11. Tear down the lock ring inside the vehicle;
Disconnect the connecting bar to tear down the lock ring inside
vehicle body.
12. Tear down door lock and the outdoor handle with lock
barrel:
(a) Disconnect the outdoor with lock barrel from the con-
necting bar.
(b) Tear down three screws and door lock.
(c) Tear down the two bolts and the outdoor handle with lock
barrel.
(d) Tear down the spring snapping ring and lock barrel.
Change of Glass
(Dr SF)
1. Tear down the glass bracket with screwdriver or similar
tool.
2. Coat the black glue on the inner side of glass bracket
liner.
3. Tap the glass bracket with rubber hammer to encase it.
Tear down the bolts on gear panel with the pliers or similar
tool.
4. Tear down the bolts of door window glass bracket to take the
glass out.
SJ
a
Dr
a:35mm
bb:80mm(manual)
65mm(electric)
SF

B0-17
Assembly of rear door
1. Coat the MP lubricant on the parts before mounting
(a) Coat the MP lubricant on the sliding face and gear of
glass elevator;
Notice: Do not coat the MP lubricant on the spring of
glass elevator.
(b) Coat the MP lubricant on the sliding face of door lock. Vehicle Body
Rear Door
2. Mount the outdoor handle with lock barrel and door lock:
(a) Mount the lock barrel on the outdoor handle with spring
snapping ring.
(b) Mount the outdoor handle and the lock barrel with two
bolts;
(c) Mount the lock door with three screws; and
(d) Connect the connecting bar to the outdoor handle.
3. Mount the inside lock ring
Mount the inside lock ring and connect the connecting bar.
4. Mount the glass elevator:
(a) Put in the elevator through the auxiliary hole;
(b) Mount three fixing bolts of elevator (for manually-
operated elevator);
Mount four fixing bolts of elevator (for electric elevator)
(c) Mount the small sliding track and tighten the fixing bolts
temporarily;
(SJ)
(a) Put in the elevator through the auxiliary hole;
(b) Mount three fixing bolts of elevator;
(c) Mount four fixing bolts of elevator bracket.
SJ
SJ

B0-47Vehicle Body
Tailgate
9. Tear down the tailgate lock
Tear down the three screws from the tailgate to tear down the
lock
Change of Glass
1. Tear down the glass bracket with screwdriver or with
similar tool.
2. Coat the polyurethane glue, seize the gasket on the
glass and coat the glass glue at outside of the gasket.
3. Encase the glass bracket by tapping it with rubber
hammer.
Tailgate Assembly of
Assembly the tailgate in the reverse order of the disassembly
approaches.
Notice: coat the lubricant on the sliding face, elevator
gear and door lock before mounting the parts.
120mm
105mm
outside