belt GREAT WALL SAFE 2006 User Guide

B0-59Body
Safety Belt
Safety belt
1. Driving test (in the security place);
(a) Fix the safety belt of the front seat.
(b) Drive the vehicle at the speed of 16 km/h and brake it
suddenly;
(c) Check the safety belt, which should be lock tightly
without expansion.
Remark: it is required to tear down the mechanism
fittings of the safety belt to make the following static load
test at the security place, in addition, moderate inspection
for the new safety belt should be conducted before
mounting no matter when the new safety belt fittings is
needed to mount.
2. Static test

a) Tear down the lock-type expansion fittings;
(b) Tilt the expansion fittings slowly;
(c) Check the expansion of safety belt, which should be
pulled out when the tilt angle is no more than 15 but not
be pulled out when the tilt angle is more than 45
.
If the requirement is not met, change the safety belt fittings.
Two-point safety belt
(manually operated)
(a) Adjust the safety belt to the moderate length;
(b) Exert the stable load on the belt;
(c) Check whether the safety belt is elongated or not, in such
case, the belt should not be elongated.

B0-61
Safety belt (
)
Element figure
Vehicle Body
Safety Belt
Dr rear seat
SL rear seat
N
m
specified torque
18
18
18
18
18
SY small seat18
18
18

A-6
Torsion moment
Fastening location Applicable vehicle model N*m
Fixing nut of steering wheel
Connecting nut of steering ger and swing arm
Fixing bolt of steering driven arm
Fixing bolt of steering gear
Connecting nut of steering drag rod and swing arm of
steering gear
Connecting nut of steering drag rod and steering driven
arm
Connecting nut of steering drag rod and front brake
Steering limit boltDr SF
SL SK SY SJ
Dr SF
Dr
SF
SL SK SY
SJ
Dr
SF
SL SK SY
SJ
Dr SF
Dr
SF
Dr SF
SJ50
5
30
2
245
25
80
10
142
10
83
10
78
10
96
10
145
10
96
10
78
10
91
10
91
10
59
5
91
10
90
10
Steering system
Specification
Item Applicable vehicle model Specification
Max play of steering wheel
Tension degree of driving belt:
When f=98N New belt
Old beltDr SF
Dr SL SK SF SY SJ
Dr SL SK SF SY SJ6

5-7mm
7-9mm
Specification of Maintenance and Up-Keeping
Steering System