width HONDA ACCORD 2002 CL7 / 7.G Owners Manual

µµ µµÎ Î Î
Î Î
Î Î
Î
Î Î
ÎÎÎ Î
Î
Specif ications
T echnical Inf ormation342
Dimensions
Weights Capacities
Air Conditioning
Capacities 188.8 in (4,795 mm)
1.45 US gal (5.5
, 1.21 Imp gal)
1.43 US gal (5.4, 1.19 Imp gal)
1.85 US gal (7.0
, 1.54 Imp gal)
1.82 US gal (6.9, 1.52 Imp gal)
70.3 in (1,785 mm)
56.9 in (1,445 mm)
106.9 in (2,715 mm)
61.2 in (1,555 mm)
60.4 in (1,535 mm)
HFC-134a (R-134a)
25 27 oz (700 750 g) 4.5 US qt (4.3
, 3.8 Imp qt)
4.2 US qt (4.0
, 3.5 Imp qt)
5.9 US qt (5.6
, 4.9 Imp qt)
2.0 US qt (1.9
, 1.7 Imp qt)
2.1 US qt (2.0, 1.8 Imp qt)
2.6 US qt (2.5, 2.2 Imp qt)
6.4 US qt (6.1
, 5.4 Imp qt)
2.6 US qt (2.5
, 2.2 Imp qt)
Excluding the oil remaining in the engine.
Including the coolant in the reserve tank and that remaining in the
engine.
Reserve tank capacity: 0.16 US gal (0.6
, 0.13 Imp gal)
4.8 US qt (4.5
, 4.0 Imp qt)
57.3 in (1,455 mm)
1.48 US gal (5.6
, 1.23 Imp gal)
1.98 US gal (7.5
, 1.65 Imp gal)
4.6 US qt (4.4
, 3.9 Imp qt)
5.3 US qt (5.0
, 4.4 Imp qt)
3.1 US qt (2.9
, 2.6 Imp qt)
7.6 US qt (7.2
, 6.3 Imp qt)
Length
Width
Height
Wheelbase
Track
Gross vehicle weight rating See the certification label attached
to the driver’s doorjamb. Engine
coolant
Engine oil
Manual trans-
mission oilAutomatic
transmission
fluid
Windshield
washer
reservoir
ND-OIL8
Refrigerant type
Charge quantity
Lubricant type
16 18 oz (450 500 g)
Fuel tank Approx. Front Rear
6-cylinder models Change
ManualAutomatic
Total ManualAutomatic
Change Including
filter
Without
filter
Total
Change Total
Change Total
U.S. Cars
Canada Cars
1: 2:
3 : 6-cylinder models
:
6-cylinder models
:
17.12 US gal (64.8, 14.26 Imp gal)
1 2 3 3
333 3

µ
The treadwear grade is a compara-
tive rating based on the wear rate of
the tire when tested under controlled
conditions on a specif ied government
test course. For example, a tire
graded 150 would wear one and one-
half (1 1/2) times as well on the
government course as a tire graded
100. The relative perf ormance of
tires depends upon the actual condi-
tions of their use, however, and may
depart signif icantly f rom the norm
due to variations in driving habits,
service practices and dif f erences in
road characteristics and climate. The traction grades, f rom highest to
lowest, are AA, A, B, and C. Those
grades represent the tire’s ability to
stop on wet pavement as measured
under controlled conditions on
specif ied government test surf aces
of asphalt and concrete. A tire
marked C may have poor traction
perf ormance.
Warning: The traction grade
assignedtothistireisbasedon
straight-ahead braking traction tests,
and does not include acceleration,
cornering, hydroplaning, or peak
traction characteristics.
All passenger car tires must conf orm
to Federal Saf ety Requirements in
addition to these grades.
Quality grades can be f ound where
applicable on the tire sidewall
between the tread shoulder and the
maximum section width. For
example:
The tires on your car meet all U.S.
Federal Saf ety Requirements. All
tires are also graded for treadwear,
traction, and temperature perform-
ance according to Department of
Transportation (DOT) standards.
The f ollowing explains these
gradings.
T echnical Inf ormation
DOT T ire Quality Grading (U.S. Vehicles)
Treadwear Traction AA, A, B, C
T readwear 200
Traction AA
Temperature A
Unif orm T ire Quality Grading
345