ignition HONDA ACCORD COUPE 2011 8.G Technology Reference Guide

A U T O D O O R L O C K SProgram how and when the vehicle doors automatically lock and unlock.
Default Lock SettingProgramming the Auto Door Unlock Setting
The doors are preset to
lock when your vehicle
reaches about 1\f mph.
Default Unlock Setting
Only the driver’s door is
preset to unlock when
you shift into Park (P).
Programmable Auto Door Lock\bUnlock Settings
Below are the options you can choose. See Auto Door Locking/Unlockingin your owner’s
manual for instructions on programming these settings.
AUTO \fOOR UNLOCK
Auto Unlock
(all doors)
When you turn
the ignition OFFWhen you shift into Park
Auto Unlock
(only driver’s door)
When you turn
the ignition OFFWhen you shift into Park
Turn off
Auto Unlock
Operate manually
AUTO \fOOR LOCK
Auto Lock
When you
reach 1\f mphWhen you shift out of Park
Turn off
Auto Lock
Operate manually
1. Close all doors. Shiftinto Park.
2.Turn the ignition switch to ON (II).4. Within 5 seconds\b turnthe ignition
switch to LOCK (\f).
3. Press and hold the unlock side of
the master lock switch for about 1\f
seconds. In that time\b you will hear
three clicks.
23
To program all doors to unlock when you shift to Park:
11 Accord 2D TRG\fATG_NEW STYLE 8/3/2010 10\f49 AM Page 3

89
DRIVING POSITION MEMORY SYSTEM (DPMS) (if equipped)
Store a driver’s seat position into memory for each remote transmitter.
Programming DPMS
Note\bA stored memory position is linked to the corresponding keyless remote (1
or 2). Each item begins to adjust when you unlock the driver’s door with the remote
and enter the vehicle.
1. Turn the ignition switch to
ON (II). Shiftinto Park (P).
2. Adjust your seat to the preferred
setting. 3.
Press and hold the SET button
until you hear a beep\b then release.
4. Press and hold the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
Paddle Modes
P A D D L E S H I F T I N G *( i f e q u i p p e d )
Manually shift your vehicle’s gears up or down. Useful for engine braking or when
driving in hilly terrain or cornering.
Pull () to shift down. Pull(
+ ) to shift up.
* V6 automatic transmission model only
DPaddle Shift Mode
•
Move the shift lever to the D position.
• Pull (+) or () to shift to a higher or lower
gear.
• The selected gear number is displayed on the gear position indicator.
• When the vehicle’s speed is constant or when you press the accelerator pedal\b the mode
returns to automatic.
Sequential Shift Mode
• Move the shift lever to the S position.
• Pull (+) or () to manually shift between first
and fifth gears.
• The M indicator and selected gear number are displayed on the gear position indicator.
• Move the shift lever to the D position to
cancel this mode.
11 Accord 2D TRG\fATG_NEW STYLE 8/3/2010 10\f51 AM Page \b