dashboard HONDA ACCORD HYBRID 2023 User Guide
[x] Cancel search | Manufacturer: HONDA, Model Year: 2023, Model line: ACCORD HYBRID, Model: HONDA ACCORD HYBRID 2023Pages: 627, PDF Size: 23 MB
Page 163 of 627

161
uuOpening and Closing the Trunk uTrunk Main Switch
Controls
Trunk Main Switch
The trunk main switch disables the trunk 
release button on the remote transmitter, 
trunk release button on the trunk lid, and 
trunk opener under the driver’s side lower 
corner of the dashboard to protect luggage in 
the trunk.
1. Make sure the rear seat-back is not folded 
down.
2. Turn off the trunk main  switch in the glove 
box.
3. Lock the glove box.
Emergency Trunk Opener
The trunk release lever allows you to open the 
trunk from inside for your safety.
Slide the release lever in the direction of the 
arrow.
1Trunk Main Switch
If you need to give the ke y to someone else, remove 
the built-in key from the  keyless remote by pushing 
the release button, and give the remote as a valet 
key.
ON
OFF
Main Switch
1 Emergency Trunk Opener
Parents should deci de if their children should be 
shown how to use this feature.
Lever
23 ACCORD 4D US HEV MAP-3130B6000.book  161 ページ  2022年10月13日 木曜日 午後4時50分 
Page 174 of 627

uuOperating the Switches Around the Steering Wheel uPOWER Button
172
Controls
When the power mode is set to any mode 
other than OFF and yo u remove the keyless 
remote from the vehicle and shut the door, an 
alarm will sound. If th e alarm continues to 
sound, place the keyless remote in another 
location.
■When the power mode is in 
ACCESSORY
The alarm will sound from outside the vehicle.
■When the power mode is in ON
An alarm will sound both inside and outside 
the vehicle. In addition, a warning indicator 
will appear on the instrument panel.
■Keyless Remote Reminder1 Keyless Remote Reminder
When the keyless remote is within the system’s 
operational range, and the driv er’s door is closed, the 
warning function cancels.
If the keyless remote is taken out of the vehicle after 
the power system has been turned on, you can no 
longer change the  POWER button mode or restart 
the power system. Always make sure if the keyless 
remote is in your vehi cle when you operate the 
POWER  button.
Removing the keyless remote from the vehicle 
through a window does not  activate the warning 
buzzer.
Do not put the keyless remo te on the dashboard or in 
the glove box. It may cause the warning buzzer to go 
off. Under some other cond itions that can prevent 
the vehicle from locating the keyless remote, the 
warning buzzer may also go off even if the keyless 
remote is within the system’s operational range.
23 ACCORD 4D US HEV MAP-3130B6000.book  172 ページ  2022年10月13日 木曜日 午後4時50分 
Page 180 of 627

178
uuOperating the Switches Around the Steering Wheel uAuto High-Beam
Controls
Auto High-Beam
The front sensor camera detects the light  sources ahead of the vehicle such as the 
lights of a preceding or oncoming vehicle, or  street lights. When you are driving at 
night, the system automatically switches  the headlights between low beam and high 
beam depending on the situation.
■Activating the system
When all of the following conditions have been met, the auto high-beam indicator 
comes on and between the high beam  and low beam switches automatically 
depending on the situation. •The power mode is in ON.
• The light switch is in  AUTO.
• The lever is in the low beam position.
• The headlights have  been automatically 
activated.
• It is dark outside the vehicle.
If the auto high-beam indicator does not co me on even when all the conditions have 
been met, carry out either of the procedur es below and the indicator will come on.
• Pull the lever toward you and release it.
• Turn the light switch to   th en turn the light switch to  AUTO.
■How to Use the Auto High-Beam
1Auto High-Beam
The auto high-beam system  does not always operate 
in every situation. This syst em is just for assisting the 
driver. Always observe your  surroundings and switch 
the headlights between high beam and low beam 
manually if necessary.
If you find the timing of beam changes inconvenient 
for driving, change the  headlight beams manually.
The range and the distance at which the camera can 
recognize varies de pending on conditions 
surrounding your vehicle.
Regarding the handling of  the camera mounted to 
the inside of the windshiel d, refer to the following.
2 Front Sensor Camera  P. 479
For the auto high-beam to work properly:
•Do not place an object that reflects light on the 
dashboard.
•Keep the windshield around the camera clean.
•When cleaning the windshield, be careful not to 
apply the windshield cleans er to the camera lens.
•Do not attach an object, sticker, or film to the area 
around the camera.
•Do not touch the camera lens.
If the camera receives a st rong impact, or repairing of 
the area near the camera is  required, consult a dealer.
Light Switch
Auto High-Beam 
Indicator
23 ACCORD 4D US HEV MAP-3130B6000.book  178 ページ  2022年10月13日 木曜日 午後4時50分 
Page 191 of 627

189Continued
Controls
Seats
Front Seats
Adjust the driver’s seat as far back as possible 
while allowing you to ma intain full control of 
the vehicle. You should be able to sit upright, 
well back in the seat and be able to 
adequately press the pedals without leaning 
forward, and grip the steering wheel 
comfortably. The passenger’s seat should be 
adjusted in a similar manner, so that it is as far 
back from the front airbag in the dashboard 
as possible.
■Adjusting the front power seat(s)*
1 Seats
Always make seat adjustments before driving.
Move back.
Allow sufficient 
space.
■Adjusting the Seat Positions
1
Front Seats
The National Highway Traffic Safety Administration 
and Transport Cana da recommend that drivers allow 
at least 10 inches (25 cm)  between the center of the 
steering wheel and the chest.
You can recall a previously saved driving position in 
profile settings using the  audio/information screen.
2 Profile Settings  P. 295
3WARNING
Sitting too close to a front airbag can result 
in serious injury or death if the front 
airbags inflate.
Always sit as far back from the front 
airbags as possible  while maintaining 
control of the vehicle.
Horizontal 
Position 
Adjustment
Height 
Adjustment 
(Driver’s seat 
only)
Seat-back Angle 
Adjustment Lumbar Support 
Adjustment 
(Driver’s seat only)
* Not available on all models
23 ACCORD 4D US HEV MAP-3130B6000.book  189 ページ  2022年10月13日 木曜日 午後4時50分 
Page 217 of 627

Continued215
uuClimate Control System uUsing Automatic Climate Control
Controls
Use the system when the power system is on.
1. Press the AUTO  button.
2. Adjust the interior temperature using the dr iver’s side or passenger’s side control 
dial.
3. Press the   (on/off)  button to cancel.
■Switching between the recirc ulation and fresh air modes
Press the   (recirculation) button and switch the mode depending on 
environmental conditions.
Recirculation mode (indicator on): Recirculates air from the vehicle’s interior through 
the system.
Fresh air mode (indicator off): Maintains  outside ventilation. Keep the system in 
fresh air mode in normal situations.
1 Using Automatic Climate Control
For directions on the proper handling of the front 
seat heaters
* and seat ventilation*, refer to the 
following page. 2 Front Seat Heaters
* P. 211
2 Front Seat Heaters and Seat Ventilation* 
P. 212
Floor and 
defroster 
vents
Floor ventsDashboard and floor 
vents, and back of 
the center console
*
Dashboard vents 
and back of the 
center console
*
AUTO
 Button
Driver’s Side 
Temperature 
Control Dial
 (Recirculation) 
Button
Fan Control Dial
A/C (Air Conditioning) 
Button Passenger’s 
Side 
Temperature 
Control Dial
 (on/off) Button
 (Windshield Defroster) 
Button
* Not available on all models
23 ACCORD 4D US HEV MAP-3130B6000.book  215 ページ  2022年10月13日 木曜日 午後4時50分 
Page 271 of 627

269
uuAudio System Basic Operation uHondaLink ® Service
Features
Your subscribed telematics service provider can check your vehicle’s condition.
■Virtual Dashboard
You can remotely check the mileage, fu el range, and oil life in your app.
■Remote start and stop the engine
You can remotely turn the power system on and off using your app the same way 
as the keyless remote.
■Geofence Alert
You can receive a notifi cation anytime your vehicle enters or leaves a region set by 
you.
■Speed Alert
You can receive a notification when your  vehicle has exceeded a speed limit set by 
you.
■Personal Data Wipe
You can reset your audio and navigation system settings to factory defaults with the 
app.
■Wi-Fi hotspot
Vehicle provides a 4G LTE network environment as a Wi-Fi router to use a tablet or 
a smartphone in your vehicle.
■Convenient Features1 Convenient Features
The contact information of your provider, your user 
ID, and PIN will be give n when you subscribe to 
HondaLink ®. If you forget any of the above, contact a 
Honda dealer, or go to  hondalink.honda.com.
23 ACCORD 4D US HEV MAP-3130B6000.book  269 ページ  2022年10月13日 木曜日 午後4時50分 
Page 277 of 627

275
uuAudio System Basic Operation uApple CarPlay
Continued
Features
• Maps
Display Apple Maps and use the navigation function just as you would on your 
iPhone.
Only one navigation system (Google Built-In or Apple CarPlay) can give directions 
at a time. When you are using one system,  directions to any prior destination set 
on the other system will be canceled, and the system you are currently using will 
direct you to your destination.
• Honda
Select the Honda  icon to go back to the home screen.
• Go back to the Apple Ca rPlay Dashboard screen.
• Go back to the Apple CarPlay menu screen.
• /
Change the screen size of Apple CarPlay.
Models with Google Built-In
23 ACCORD 4D US HEV MAP-3130B6000.book  275 ページ  2022年10月13日 木曜日 午後4時50分 
Page 410 of 627

uuHonda Sensing ®u Collision Mitigation Braking SystemTM (CMBSTM)
408
Driving
■When the system activates
You can change the distance ( Long/Normal /Short ) between vehicles at which the 
system’s earliest collision alert will come  on through the audio/information screen 
setting options.
2 Customized Features  P. 318
1When the system activates
The head-up warning uses a  lens located at the front 
end of the dashboard.
Do not cover the lens or  spill any liquid on it.
Models with Head-up display
Lens
The system provides visual and audible alerts  of a possible collision, and stops if the 
collision is avoided.
u Take appropriate action to prevent a collision (apply the brakes, change 
lanes, etc.)
Visual Alerts Beep
Audible Alert
Head-up Warning Lights
*
* Not available on all models
23 ACCORD 4D US HEV MAP-3130B6000.book  408 ページ  2022年10月13日 木曜日 午後4時50分 
Page 524 of 627

522
uuMaintenance Under the Hood uOpening the Hood
Maintenance
Opening the Hood
1. Park the vehicle on a level surface, and set 
the parking brake.
2. Pull the hood release handle under the 
driver’s side lower co rner of the dashboard.
u The hood will pop up slightly.
3. Push the hood latch lever (located under 
the front edge of the hood to the center) to 
the side and raise the hood. Once you have 
raised the hood slightly, you can release the 
lever.
4. Remove the support rod from the clamp 
using the grip. Mount the support rod in 
the hood.
When closing, remove the support rod and 
stow it in the clamp, then gently lower the 
hood. Remove your hand at a height of 
approximately 12 inches (30 cm) and let the 
hood close.1 Opening the Hood
NOTICE
Do not open the hood when the wiper arms are 
raised. The hood will strike  the wipers, resulting in 
possible damage to the hood and/or the wipers.
NOTICE
Do not press the engine cover forcibly. This may 
damage the engine cover and component parts.
When closing the hood, check that the hood is 
securely latchedM
If the hood latch lever moves  stiffly, or if you can 
open the hood without lifti ng the lever, the latch 
mechanism should be cl eaned and lubricatedM
3WARNING
The hood support rod can become very hot 
due to heat from the engine.
To ensure against possible burns, do not 
handle the metal section of the rod: Use 
the foam grip instead.
Hood Release Handle
Pull
Lever
Support Rod
Grip
Clamp
23 ACCORD 4D US HEV MAP-3130B6000.book  522 ページ  2022年10月13日 木曜日 午後4時50分 
Page 595 of 627

593
uuFuses uFuse Locations
Handling the Unexpected
21EVTC20 A
22 DBW 15 A
23HAZARD15 A
24 BACKUP FI-ECU 10 A
25IGP15 A
26 − −
27LCM L20 A
28 INJ 20 A
29STOP10 A
30 LCM R 20 A
31IG COIL15 A
32 ICM 10 A
33PCU EWP10 A
34 − −
35−−
38 − −
39IGA10 A
40 IGB 10 A
41−−
42 MON2 7.5 A
43−−
44 − −
45IGPS (LAF)10 A
46 − −
Circuit ProtectedAmps
Located under the dashboard.
Fuse locations are shown on the label under 
the steering column.
Locate the fuse in question by the fuse 
number and label number.
■Interior Fuse Box
Fuse Label
■Circuit protected  and fuse rating
Circuit ProtectedAmps
1P/W DR20 A
2P/W AS20 A
3P/W RR R20 A
4P/W RR L20 A
5OPTION10 A
6SRS10 A
7TRUNK LOCK ACT10 A
8−−
9FR ACC SOCKET20 A
10DOOR LOCK20 A
11METER10 A
12−(10 A)
13OPTION210 A
14MISS SOL10 A
15DR DOOR UNLOCK(10 A)
16−−
17−−
18−−
19−−
20CGW10 A
23 ACCORD 4D US HEV MAP-3130B6000.book  593 ページ  2022年10月13日 木曜日 午後4時50分