dashboard HONDA ACCORD SEDAN 2019 Navigation Manual (in English)
[x] Cancel search | Manufacturer: HONDA, Model Year: 2019, Model line: ACCORD SEDAN, Model: HONDA ACCORD SEDAN 2019Pages: 127, PDF Size: 3.3 MB
Page 2 of 127

The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd., reserves the right, 
however, to discontinue or change specif ications or design at any time without notice and without incurring any obligation.
Accessories Precautions
The GPS antenna is located  in the dashboard. Metallic front or side window tinting can  seriously degrade or obstruct GPS recept ion.
Signal noise from devices such as radar detectors, vehicle tracking devices, remote starters, and  additional amplifiers can disrupt the navigation system. If you 
install any such item, install it away from the navigation display and antenna.
Important Safety Information
Avoid focusing on the screen or manually operating the system controls while driving.
Certain on-screen controls are disabled when driving, however most of t he voice c
o
 mmands continue to function. Pull to the side of the road if you need to devote 
more attention and time to look at  the screen or access additional menus.
Route guidance may conflict with street closures, road constructi on, 
 detours, and out-of-date map data.
The system itself may also have limitations. Verify route information by carefully observing roads, signs, and signals. Always  use your own judgment an
 d obey 
traffic laws.
2
System Limitations P.  106
NOTICEThis vehicle’s navigation display, if so  equipped, includes mercury-containing com ponents. Upon removal, please reuse, recycle,  or dispose of as hazardous waste.Clean the screen with a soft, damp cloth. You may use a mild cleaner intended for use on navigation screens.
3 WARNING
Using the navigation system while driving can take your 
attention away from the road, causing a crash in which you 
could be seriously injured or killed.
Only operate system controls when the conditions permit you 
to safely do so.
 00X31-TVA-8100       
           
  2019 Accord Navigation Manual               NM-08519 
Page 9 of 127

7
Quick Reference GuideDuring Route Guidance
During route guidance, route information is displayed on the map screen.
You can see the detailed informat ion on the turn list
  screen.
Map Screen
Guidance Screen
Dashboards (P75)
Next guidance indicator 
(P75)
Distance to the next guidance point and street name of 
next guidance point.
Select to get next voice guidance.
Queue indicator 
Where To? 
(P54)
Calculated route
Current street name 
Waypoint
Street name of next 
guidance point
Distance to next 
guidance point
Estimated time to 
next guidance point
Day or Night Mode
Press the   button to manually 
switch between Day and Night modes.
Turn-by-Turn Directions
The next guidance point appears on 
the Driver Information Interface.
Day ModeNight Mode
Remaining 
distance Street name of next 
guidance point
Next driving maneuver is 
approaching. 
Page 19 of 127

17
System Setup
Voice Control System
Your vehicle has a voice control system that allows hands-free operation of the 
navigation system functions.
The voice control system uses the   and  buttons on the steering wheel and a 
microphone near the map lights on the ceiling.
For details of the   button,  button and microphone position, see the Owner's 
Manual.
Voice Recognition
To achieve optimum voice recognition wh en using the navigation voice control 
system:
• Make sure the correct screen is displa yed 
 for the voice command that you are 
using. The system recogniz es only certain commands.
Available navigation commands:
2 Voice Commands P.  118
• Close the windows and moonroof.
• Adjust the dashboard and side vents so air does not blow onto the microphone 
on
  the ceiling.
• Speak in a clear, natural speaking voice without pausing between words.
• Reduce any background noise if possible.  The 
 system may misinterpret your 
command if more than one person  is speaking at the same time.
1Voice Control System
When you press the   button, the system prompts 
you to say a voice command. Press and release the   button again to bypass  this prompt and give a 
command.
1 Voice Recognition
The voice control system can only be used from the 
driver’s seat because  the microphone unit removes 
noises from the front  passenger’s side. 
Page 77 of 127

75Continued
Navigation
Driving to Your Destination
Viewing the Route
This section describes how to follow the route guidance to your destination.After calculating the route to your 
destination, 
the route is displayed on 
the map screen.
2 During Route Guidance  P. 7
As you drive, the system tracks your 
position on the map in real time and 
provides guidance as you approach 
each guidance point on the route.
The following options are available:
• Select the next guidance indicator to  replay the 
 voice guidance for the next 
maneuver.
• Select the text bar on the top of the  map to display 
 the turn list screen.
2Turn List Screen  P. 77
• Select the queue indicator to  display queued notifications.
2Alert and Notification Banners  P. 78
• Select   to display the map tools window.
2Map Tools P.  83
• Select  to cancel the route guidance and remove your current route.
2Canceling Your Route  P. 10
■ Map Screen
1
Viewing the Route
When your phone is connected to  Bluetooth® 
HandsFreeLink ®, the navigation screen  will switch to 
the incoming call screen when receiving a call.
Select the vehicle icon to view the  Where Am I? 
screen. 2 Viewing the Current Location Information  
P. 87
You can stop your vehicle en  route (e.g., to rest, stop 
for gas, etc.), and then continue on your route.
If you did not complete y our route, the navigation 
restarts when you re start your vehicle.
The next guidance indicator does not appear in the 
following cases.
•The vehicle speed is 3 mph (4.8 km/h) or less•The GPS signal is weak
•The vehicle position on the  map and current vehicle 
position do not match
Next guidance indicator
DashboardsQueue indicator 
Page 78 of 127

uu Driving to Your Destination  u Viewing the Route
76
Navigation
• Select the map dashboards when you want  to change the information that is 
displayed. Select the following options:
Elevation , Direction , Location , Arrival , Distance , Arrive In , Via Arrival , Via 
Distance , Via In .
The intersection view screen displays a view  of th
 e upcoming intersection and which 
lane you should be driving.
■ Intersection View Screen
1
Viewing the Route
Turn-by-Turn Directions
The next guidance point  appears on the Driver 
Information Interface.
The Turn-by-Turn directions  may not be displayed if 
the information cannot be received correctly. 
Page 104 of 127

102
uu Troubleshooting  u Guidance, Routing
Troubleshooting
Guidance, Routing
ProblemSolution
The navigation system does not route me the same 
way I would go or the same way as other mapping 
systems.The navigation system attempts to generate the optimal route. You can change the 
route preferences used wh en calculating a route.
2Calculation Mode  P. 41
The street I’m on is not  shown on the map screen.The mapping database is constantly undergoing revision.
The vehicle position icon is not following the road. ●Check that the GPS antenna  (located in the dashboard) is not blocked. For best 
reception, remove items from the dashboar d, such as radar detectors, cellular 
phones, or loose articles.
●Metallic tinting or other aftermarket devices can interfere with GPS reception. 
Please consult your dealer.
2 GPS  P. 106
How do I stop the map from rotating as I drive 
along?1. Press the   button.
2. Select
   > Settings  > M ap and Vehicle > Driving Map View .
3. Check that  Dri
 ving Map View is set to Track Up  or 3D.
4.Select  North Up and then select  Save.
The “Arrival time” displa y sometimes increases 
even though I am  getting closer to my destination.The “Arrival time” is based on the speed limit on each road. Depending on the 
traffic conditions, the “Arrival time” may be calculated to be earlier or later.
My elevation (shown when  I display the current 
position) seems to fluc tuate even though my 
elevation has not changed.This is normal. The elevation can vary ±100 ft (30 m) due to GPS calculation errors.
2 GPS P.  106
My elevation is missing on the “current position” 
screen.The elevation is only displayed if the GP S antenna can receive signals from at least 
four satellites. Try moving the vehicle into  an open area. The elevation is also not 
displayed if the calculated elevation is zero or below sea level. 
Page 108 of 127

106
Reference Information
System Limitations
GPS
The signals received from GPS satellites are 
extremely weak (less than a millionth of the 
strength of a local FM station) and require 
an unobstructed view of the sky. The GPS 
antenna is located in  the dashboard. The 
signal reception can easily be interrupted or 
interfered with by the following:
• Metallic window tint on the front or side  wind
 ows
• Cellular phones, PDAs, or other electronic 
d
 evices docked in a cradle or lying loose 
on the dashboard
• Remote starters or "hidden" vehicle 
tracking system
 s mounted near the 
navigation unit
• Audio electronic devices mounted near 
the nav
 igation unit
• Trees, tall buildings, highway overpasses,  tunnels, or overhead 
 electrical power 
wires GPS is operated by the U.S. Department of 
Defense
. For security  reasons, there are 
certain inaccuracies bu ilt into GPS for which 
the navigation system must constantly 
compensate. This can cause occasional 
positioning errors of up to several hundred 
feet (meters).
Address Calculation
The destination icon shows only the 
approximate location of a destination 
address. This occurs if the number of 
possible addresses is different from the 
number of actual addr esses on a block. For 
example, the address  1425 on a 1400 block 
with 100 possible addresses (because it is 
followed by the 1500 block) will be shown a 
quarter of the way down the block by the 
system. If there are only  25 actual addresses 
on the block, the actual  location of address 
1425 would be at the end of the block.
Database
The digitized map database reflects 
conditions as they existed at various points 
in time before production. Accordingly, 
your database may contain inaccurate or 
incomplete data or information due to the 
passage of time, road construction, 
changing conditions, or other causes.
For example, some places/landmarks may 
be missing when 
 you search the database 
because the name was misspelled, the place 
was improperly categorized, or a place/
landmark is not yet in the database. This is 
also true for police st ations, hospitals, and 
other public institutions. Do not rely on the 
navigation system if you need law 
enforcement or hospital services. Always 
check with local in formation sources.