display HONDA ACCORD SEDAN 2020 Navigation Manual (in English)

Continued21
uu Personal Information u Saved Locations
System SetupH
1.Select the vehicle icon.
2. Select Save.
3. Enter a
name of the location.
4.Select Done.
■Saving Your Current Location1
Saving Your Current Location
Vehicle position may not be displayed when:
•The vehicle is traveling off-road.
•The vehicle position da ta cannot be updated.

30
System Setup
Display Mode Settings
Switching Display Mode Manually
Set the screen brightness separately for Day and Night modes. Press the
button to cycle through the displa y
modes (Day to Night to Off).
Press the button.
u The brigh
tness bar is displayed for
a few seconds.
u Select or to adjust the
brightness.
1 Switching Display Mode Manually
You can also adjust the display brightness by sliding
or swiping on the brightness bar.
You can change the touchs creen sensitivity setting.
2 Refer to the Owners Manual.

31
uu Display Mode Settings u Switching Display Mode Manually
System SetupIllumination
controlOperation
buttonSelects Day or Night display mode when the user
wants to change the brightness of the display
temporarily.
Remember: This button overrides all other display
brigh

tness adjustments either set automatically by
the sunlight sensor or manually from the System
settings screen.
Sunlight sensor
*
(see your Owner’s
Manual for
location) If the sunlight sensor detects daylight and the
headlights are
turned on, the system automatically
overrides the Nigh t display and displays the Day
display mode.
Remember: If desired, use the button to
override this automatic choice.
Dash illumination
adjustment knob
(see your Owner’s
Manual for
location)When the headlights are turn ed on, and you wish to
have the Day display mode, adjust the illumination
to the full brightness (beeps).
Remember: Adjust the dash brightness back to
mi

drange to allow auto switching by sensing the
headlights are on or off.
Headlights
(Au
to */On/Off) When turned on, the di
sp
lay changes to Night
display mode.
The previous three controls listed above can
“cancel” this
function.
Remember: Use the button to adjust the
brightness of the display.
* Not available on all models

35
uu Map and Vehicle u Driving Map View (Map Orientation)
System Setup
Driving Map View (Map Orientation)
H u u Settings u Map and Vehicle u Driving Map View
Select the map orientation. 1.Select an option.
2. Select Save.
The following options are available:
• 3D (factory de
fault): Displays the map in 3D with your direction of travel facing
up
wards.
• Tr
ack Up : Displays the map with your direction of travel facing upwards.
• North U
p: Displays the map with north always pointing up.

40
System Setup
Navigation
H u u Settings u Navigation
Changes the navigation settings.
The following options are available:
• Calc
ulation Mode : Sets route preference.
2 Calculation Mode P. 41
• Avoidances : Sets road features to avoid on a route.
2 Avoidances P. 42
• Custom Avoidances : Allows you to avoid sp ecific roads or areas.
2Custom Avoidances P. 43
• Satellite Status : Displays the sa tellite' status.
2Satellite Status P. 47
• GPS Simulator : Stops the system from receiving a GPS signal.
1 Navigation
GPS Simulator is set to off as factory default.
You can access the naviga tion settings from any
screen includes the options menu icon.
Select to open the options menu, and then select
Navigation Settings .

44
uu Navigation u Custom Avoidances
System SetupH u u Settings u Navigation u Custom Avoidances u Add
Av
oidance u Avoid Area
1.Select the upper-right
(left) corner
of the area to avoid. Select Next.
u The icon is displayed on the
map.
2. Select the
lower-left (right) corner
of the area to avoid. Select Next.
3. Select Done.
■Adding an Avoid Area

45
uu Navigation u Custom Avoidances
Continued
System SetupH u u Settings u Navigation u Custom Avoidances u Add
Av
oidance u Avoid Road
1.Select the start
ing point of the
section of road to avoid. Select
Next .
u The icon is displayed on the
map.
2. Select the ending point
of the road
section. Select Next.
3. Select Done.
■Adding an Avoid Road

48
System Setup
Traffic
H u u Settings u Traffic
Sets the traffic feature. Select an option.
The following options are available:
• Tr
affic : Enables the traffic feature.
2 Traffic Information P. 80
•Traffic Alert : Sets whether to receive an alert when traffic may cause a delay.
• Automat
ic Route Optimization : Sets whether to use optimized alternate
routes.
• Cur
rent Provider : Sets the traffic provider to use for traffic data.
• Subscriptions : Displays the lists of the current traffic subscriptions.

50
System Setup
About
H u u Settings u About
Select an option.
The following options are available:
• Syst
em Information : Displays the system information.
• EULAs : Displays end-user license agreements.
• Co
pyright and Acknowledgments : Displays copyright and acknowledgments
informat
ion.
• Resto
re Navigation Settings : Restores navigation settings to the factory
de
faults.
2 Reset Factory Default Settings P. 51

54
Navigation
Entering a Destination
H u
This section describes how to enter a destination for route guidance. Select an option.
The following options are available:
• Key
word or Address, State : Sets a destination by entering a keyword, address
or
state name.
2 Using the Search Bar P. 56
• Searching near : Selects the city to search near.
2 Changing the Search Area P. 57
• Go Home : Sets your home address as the destination.
2 Going Home P. 8
• Search Tools : Sets a destination by searching for a place.
2 Search Tools P. 60
•Saved : Sets a destination by selecting a place stored in the Saved list.
2Saved P. 68
• Recents : Sets a destination by selecting a previous destination.
2 Recents P. 68
• Categories : Sets a destination by selecting a category.
2 Categories P. 67
• myTrips : Sets a destination by selecting a saved route.
2myTrips P. 69
1 Entering a Destination
The Display Audio system can only provide route
guidance from one naviga tion system at a time.
When setting a destination on one system, any active
route guidance with the other system is canceled,
and the system you are currently using will direct you
to your destination.
If you press the butt on on the steering wheel,
select Navigation and then scroll the left selector
wheel, the following items are available. Use the
steering wheel buttons to select the items.
•Go Home
•Recent Destination•Calculation Mode
•Saved Places
•Stop•Save Location
ButtonLeft Selector Wheel