HONDA CIVIC 2009 8.G Owners Manual

To go back one step in a command
process, say ‘‘Go back,’’ or press
the HFL Back button.
If nothing is said while HFL is
listening f or a command, HFL will
time out and stop its voice
recognition, then prompt you with
available options or help
inf ormation. The next time you
press the HFL Talk button, HFL
begins listening f rom the point at
which it timed out.
To end a command sequence at
any time, press and hold the HFL
Back button, or press and release
the HFL Talk button, wait for the
beep, and say ‘‘Cancel.’’ The next
time you press the HFL Talk
button, HFL begins from its main
menu.When you f inish a command
sequence, HFL returns to idle. For
example, when you store the name
‘‘Eric,’’ the HFL system response
is ‘‘Eric has been stored.’’ The
next time you press the HFL Talk
button, HFL begins from its main
menu.
Your Bluetooth
compatible phone
with Hands Free Prof ile must be
paired to HFL bef ore you can make
and receive hands-free calls. To
conf irm that your phone is
Bluetooth
compatible, visit , or call (888)
528-7876. In Canada, call (888) 9-
HONDA-9. Your phone retailer
should also be able to conf irm that
your phone is Bluetooth
compatible. HFL does not allow you to pair
your phone if the vehicle is
moving.
For pairing, your phone must be in
its discovery mode (searching f or
a Bluetooth related device).
Up to six phones can be paired to
HFL.
The f ollowing procedure works f or
most phones. If you cannot pair
your phone to HFL with this
procedure, ref er to your phone’s
operating manual, visit
,callthe
HandsFreeLink
consumer
support at (888) 528-7876, or call
your phone retailer. In Canada,
call (888) 9-HONDA-9.
Your phone’s battery may drain
f aster when it is paired to HFL.
handsf reelink.honda.com
handsf reelink.honda.com
Bluet oot hHandsFreeL ink
Pairing Your PhoneNOT E:
216
——y
y
(#y
y

»¼
Î Î
CONT INUED
Press and release the Talk button.
Af ter the beep, if you say ‘‘Yes.’’
HFL responds ‘‘Entering phone
set up: pair menu. The pairing
process requires operation of your
Bluetooth phone. For saf ety, only
perf orm this f unction while the
vehicle is stopped.’’
HFL responds ‘‘For proper system
f unction a compatible Bluetooth
phone is required. Please visit the
HandsFreeLink
website, listed in
the owner’s manual, f or a list of
approved phones and other system
inf ormation. HandsFreeLink is
waiting to pair with a Bluetooth
phone. From your phone, search
f or Bluetooth devices and select
HandsFreeLink.’’
During the pairing process, turn
of f any previously paired phones
bef ore pairing a new phone.
Each time a phone is paired with
HFL, the system selects a pairing
code randomly or sequentialy. You
can switch this setting between
random mode and f ixed mode. To
select a pairing code setting
between Random and Fixed, ref er
to page .
If af ter three minutes your phone
is not ready to pair or a phone is
not f ound, the system will time out
andreturntoidle.
Park your vehicle. With your
phone on and the ignition switch in
the ACCESSORY (I) or ON (II)
position, press and release the
Talk button.
HFL prompts ‘‘Welcome to
Bluetooth HandsFreeLink. This
system enables hands-f ree usage
of a mobile phone. Bef ore using
this system, a phone needs to be
paired or connected with
HandsFreeLink. Would you like to
pair a phone now? Press the
Bluetooth HandsFreeLink Talk
button, and after the beep, say Yes,
to begin the pairing process, or No,
to continue.’’
HFL responds ‘‘When prompted
by your mobile phone, enter the
pairing code: 1234 .’’
Go to Step 4.
1.
2.
:
222
For example
To pair your f irst phone, f ollow theprompts on the HFL system:
Bluet oot hHandsFreeL ink
Features
217
——y
y
(#yy

»¼
Steps 4 and 5 show a
common way to get your phone into
its discovery mode (searching f or a
Bluetooth related device). If these
steps do not work on your phone,
ref er to the phone’s operating
manual. Follow the prompts on your phone
to get it into its discovery mode.
The phone will search f or HFL.
When it comes up, select
HandsFreeLink f rom the list of
options displayed on your phone.
Press and release the Talk button.
Af ter the beep, if you say No, HFL
responds ‘‘Would you like to hear
the Bluetooth HandsFreeLink
tutorial now? Press the Talk
button and af ter the beep, say yes
to begin the tutorial, or say No to
exit HandsFreeLink.’’
If you say Yes, HFL will begin the
tutorial. Follow the prompts on
HFL. When asked by the phone, enter
the four-digit code from step 3 into
your phone.
HFL responds ‘‘HandsFreeLink
has connected to a new phone. A
name is needed to identif y this
phone. Press the Talk button and
say a name. For example, John’s
phone.’’Press and release the Talk button.
After the beep, say the name you
want to use. For example, say
‘‘John’s phone.’’
HFL responds ‘‘ John’s phone
has been successf ully paired.’’
HFL responds ‘‘Would you like to
hear the Bluetooth
HandsFreeLink tutorial now?
Press the Talk button and after
the beep, say Yes to begin the
tutorial, or say No to exit
HandsFreeLink.’’
If you press and release the Talk
button and say ‘‘Yes,’’ HFL begins
Tutorial. If you say ‘‘No,’’ HFL
returns to idle.
3.
6.
4. 5.
Bluet oot hHandsFreeL ink
218
NOTE:
——y
y
(#yy

»¼
»¼
CONT INUED
To pair another phone, do this: To rename a paired phone, do this:
With your phone on and the
ignition switch in the
ACCESSORY (I) or ON (II)
position, press and release the
Talk button. After the beep, say
‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Pair.’’
Repeat steps 2 through 6 on pages and . Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Edit.’’ HFL
responds ‘‘Which phone would like
to edit? Press the Talk button, and
say a name, or say List, to hear the
names of the paired phones’’
Press and release the Talk button.
After the beep, say the name of
the phone you want to rename.
For example, say ‘‘John’s phone.’’
HFL responds ‘‘What is the new
name f or John’s phone? Press the
Talk button and say a name.’’
Press and release the Talk button.
Af ter the beep, say the new name
of the phone. For example, say
‘‘Lisa’s phone.’’
HFL responds ‘‘The name has
been changed.’’
With only one paired phone, f or
example, John’s phone , HFL
responds ‘‘What is the new name
f or John’s phone ?’’ Then go to
step 4.
2. 3.
1.
2.3.
1.
4.
217 218
Bluet oot hHandsFreeL ink
Features
219
——y
y
(#yy

»¼
»¼
To delete a paired phone, do this: To list all paired phones, do this:
Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’
Press and release the Talk button.
Af ter the beep, say ‘‘List.’’
HFL responds by listing the name
of each paired phone. When all
phones paired to the system have
been read, HFL responds ‘‘The
entire list has been read.’’
‘‘Go back’’ or ‘‘Cancel’’ does not
delete the phone.
HFL responds ‘‘The phone has
been deleted.’’
Press and release the Talk button.
Af ter the beep, if you say
‘‘Continue.’’
HFL responds ‘‘Preparing to
delete John’s phone. Press the
Talk button and say Continue;
otherwise say Go Back or Cancel.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’
Press and release the Talk button.
After the beep, say the name of
the phone you want to delete. For
example, say ‘‘John’s phone.’’ HFL
responds ‘‘Would you like to delete
John’s phone? Press the Talk
button and say Yes or No.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Delete.’’
HFL responds ‘‘Which phone
would like to delete? Press the
Talk button and say a name, or say
list, to hear the names of the
paired phone.’’
With only one paired phone, f or
example, John’s phone , HFL
responds ‘‘Would you like to delete John’s phone ?’’ Then go to
step 4.
1.
4. 5.
2. 3.
2.
1.
Bluet oot hHandsFreeL ink
220
——y
y
(#yy

»¼
CONT INUED
To f ind out the status of the phone beingused, do this: To change f rom the currently linked
phone to another paired phone, do this:
Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’ Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’If no other phones are f ound or
paired, the f irst phone remains
linked. For example, HFL
responds ‘‘No other paired phones
were f ound/have been paired.
Returning to John’s phone .’’
Press and release the Talk button.
After the beep, say ‘‘Status.’’ For
example, HFL responds ‘‘John’s
phone is linked. Battery strength
is three bars. Signal strength is
f ive bars, and the phone is
roaming.’’
Some Phones may not send the
status information to the HFL
system. Press and release the Talk button.
Af ter the beep, say ‘‘Next phone.’’
HFL responds ‘‘Searching f or the
next phone.’’
The system then disconnects the
linkedphoneandsearchesfor
another paired phone. If the
system f inds it, f or example, HFL
responds ‘‘Paul’s phone is linked.’’
2.
1.
1.
2.
Bluet oot hHandsFreeL ink
Features
221
——y

y
(#yy

When you pair your phone to HFL,
the HFL system will automatically
select a pairing code at random or in
order. You can customize this setting
mode between Random and Fixed. If
you select the f ixed mode, the HFL
system will select a pairing code
sequentially.Press and release the Talk button.
Af ter the beep, say ‘‘Set Pairing
Code.’’
HFL responds ‘‘Each time a phone
is paired with HandsFreeLink, a
pairing code is used f or security.
This code can be randomly
generated by HandsFreeLink, or
f ixed, which is needed f or some
Bluetooth devices with a preset
pairing code. Would you like to set
the pairing code as Random or
Fixed?’’
Press and release the Talk button.
Af ter the beep, to select the f ixed
mode, say ‘‘Fixed.’’
HFL responds ‘‘What is the f our-
digit number you would like to see
as the pairing code? Press the Talk
button and say the number.’’Press and release the Talk button.
Af ter the beep, say a desired f our-
digit number. For example, say‘‘1000.’’
HFL responds ‘‘1000. Is this
correct? Press the Talk button and
say Yes or No.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’ If the number is not correct, say
‘‘No.’’ HFL goes back to step 3.
HFL responds ‘‘HandsFreeLink
willusethiscodewhenpairingtoa
Bluetooth device.’’
Press and release the Talk button.
Af ter the beep, if the number is
correct, say ‘‘Yes.’’
1. 2. 3.4. 5. 6.
To change the setting mode, do this:
Bluet oot hHandsFreeL ink
Set t ing a Pairing Code
222
——y
y
(#yy

CONT INUED
You can select or change some
settings for the HFL system. Here
are the settings you can select or
change. To do this, make sure your
vehicle is parked safely, with your
phone on and the ignition switch in
the ACCESSORY (I) or ON (II)
position.You can set a f our-digit security
passcode to lock the HFL system
f or security purposes.
If you f orget your passcode, you
cannot activate HFL. Consult your
dealer to cancel the passcode. The incoming notif ication can be
set to a ring tone, a prompt, or no
notif ication. The def ault setting is
aprompt.
Press and release the Talk button.
Af ter the beep, say ‘‘System setup.’’
HFL responds ‘‘System setup
options are security, change
passcode, call notif ication, auto
transf er, and clear. Press the Talk
button and say a command.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Security.’’
HFL responds ‘‘Security is
disabled. Would you like to enable
security? Press the Talk button
and say Yes or No.’’Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’
HFL responds ‘‘What is the f our-
digit number you would like to set
as your security passcode? Press
the Talk button and say the
number.’’
If you say ‘‘No,’’ HFL returns to
idle.
Press and release the Talk button.
Af ter the beep, say the f our-digit
passcode you want to use. For
example,say‘‘1,2,3,4.’’
HFLresponds‘‘1,2,3,4.Isthis
correct? Press the Talk button and
say Yes or No.’’
You can also select a ‘‘System
Clear’’ command to reset HFL
(see page ).
You can change the security
passcode. 3.
1. 2. 4.
244
To set a security passcode, do this:
Bluet oot hHandsFreeL ink
Setting Up the System
Setting a security passcode Selecting the incoming
notif ication
Changing a security passcode
Features
223
——y
y
(#yy

Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’
HFL responds ‘‘Security is on.
Each time the vehicle is turned on,
the passcode will be required to
use the system. If you f orget this
passcode, you must either go to
the dealer to have it reset, or clear
the entire system using the
System Clear command.’’Press and release the Talk button.
Af ter the beep, HFL prompts ‘‘The
system is locked. What is the f our-
digit passcode?’’
Press and release the Talk button.
Af ter the beep, say your f our-digit
passcode.Forexample,say‘‘1,2,3,4.’’
If thepasscodeiscorrect,HFL
responds ‘‘System is unlocked.’’Press and release the Talk button.
Af ter the beep, say ‘‘System setup.’’
HFL responds ‘‘System setup
options are security, change
passcode, call notif ication, auto
transf er, and clear. Press the Talk
button and say a command.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Change
passcode.’’
HFL responds ‘‘What is the f our
digit number you would like to see
as your security passcode? Press
the Talk button and say the
number.’’
If thepasscodeisnotcorrect,please
try again according to the HFL’s
guidance.
Once a passcode is set, HFL will
prompt you f or your passcode each
time the ignition switch is turned to
the ON (II) position and you press
the Talk button. You will only be
askedforthepasscodeonceper
ignition cycle.
You can also select a ‘‘System Clear’’
command to reset HFL (see page). Press and release the Talk button.
Af ter the beep, say your f our-digit
passcode,forexample,say‘‘1,2,3,4.’’
1. 2. 3.
1. 2.3.
5.
244To enter your passcode, do this; To change your security passcode, do this:
Bluet oot hHandsFreeL ink
224
——y
y
(#yy

To set the incoming notif ication, do this:If you say, ‘‘Prompt.’’ HFL responds
‘‘An incoming call prompt will be
used.’’ You will hear a ‘‘You have an
incoming call.’’ prompt when
receiving an incoming call.
If you say, ‘‘Of f ,’’ no audible
notif ication of an incoming call will
be selected. During an incoming call,
thereisnoringtoneorprompt
playback. The audio system will still
mute, and the HFL message or the
HFL notif ication screen will be
displayed.
Press and release the Talk button.
Af ter the beep, say ‘‘System setup.’’
HFL responds ‘‘System setup
options are security, change
passcode, call notif ication, auto
transf er, and clear. Press the Talk
button and say a command.’’
Press and release the Talk button.
After the beep, say ‘‘Call
notification.’’
HFL responds: ‘‘Would you like
the incoming call notif ication to be
aringtone,apromptoroff?’’
Press and release the Talk button.
Af ter the beep, f or example, say
‘‘Ring tone.’’
HFL responds ‘‘A ring tone will be
used.’’ You will hear a ring tone
through the audio speakers to
announce an incoming call.
If thepasscodeiscorrect,HFL
responds‘‘1,2,3,4.Isthiscorrect?
Press the Talk button and say Yes
or No.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’
HFL responds ‘‘Security passcode
has been changed.’’
2.
1. 3.
4. 5.
Bluet oot hHandsFreeL ink
Features
225
——y
y
(#yy