wheel bolt torque HONDA CIVIC HYBRID 2005 7.G Owners Manual
[x] Cancel search | Manufacturer: HONDA, Model Year: 2005, Model line: CIVIC HYBRID, Model: HONDA CIVIC HYBRID 2005 7.GPages: 228, PDF Size: 3.15 MB
Page 182 of 228
Lower the vehicle to the ground
and remove the jack.Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
f acility.
Tighten the wheel nuts to:
Remove the center cap before
storing the f lat tire in the trunk
well.Place the flat tire face down in the
sparetirewell.
Remove the spacer cone f rom the
wing bolt, turn it over, and put it
back on the bolt.
Securetheflattirebyscrewing
the wing bolt back into its hole.
Put on the spare tire. Put the
wheel nuts back on f inger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is f irmly against
the hub. Do not try to tighten
them f ully.
12.
13. 14.
15.16.
17.
18.
Changing a Flat T ire
180
WING BOLT
SPACER
CONE
80 lbf·ft (108 N·m , 11 kgf·m)