transmission HONDA CLARITY PLUG IN HYBRID 2018 Owners Manual

14
Quick Reference Guide Power Source Electric Hybrid Engine
EV indicator
POWER / CHARGE
Gauge The readings on the blue bar The readings on the white bar
Driving state Light to mid acceleration or cruise ●
Only the electric motor provides
propulsion to the wheels. Mild to heavy acceleration ●
The electric motor provides
propulsion to the wheels. ●
The engine drives the generator,
supplying electricity to the electric
motor for added power or to the
High Voltage battery for charging. The vehicle is cruising at a higher
speed. ●
Propulsion is provided by the
engine, coupled through the gears
to the transmission. This is
indicated by the gear icon in
the display.
Energy flow Comes
on Goes
off18 CLARITY PHEV CSS-31TRW6000.book 14 ページ ２０１７年８月３１日　木曜日　午後２時 ４９分

31
Quick Reference Guide
Driving (P 369)
Electronic Gear Selector (P 382)
● Select ( P
and depress the brake pedal when turning on the power.
Park
Press the ( P
button.
Used when parking or before turning the power on or off.
Transmission is locked.
Reverse
Press back the ( R
button.
Used when reversing.
Neutral
Press the ( N
button.
Transmission is not locked.
Drive
Press the ( D
button.
Used for normal driving.Gear Position Indicator
The gear position indicator
and the shift button
indicator indicate the
current gear selection.
Gear Position Indicator Shift Button
Indicator● Gear selection
* Not available on all models18 CLARITY PHEV CSS-31TRW6000.book 31 ページ ２０１７年８月３１日　木曜日　午後２時 ４９分

38
Quick Reference Guide Why doesn’t the curved
blue line in the meter
appear even when the EV
indicator is on? The vehicle is performing a system check. 2 Auto Engine Stop/Start (P13)
Why does the beeper
sound when I start driving? The beeper sounds when the driver and/or front passenger are
not wearing their seat belts.
Why does a beeper sound
when I walk away from the
vehicle after I close the
door? The beeper sounds if you move outside the walk away auto lock
operating range before the door completely closes. 2 Locking the doors and trunk (Walk away auto lock) (P 140)
Pressing the electric
parking brake switch does
not release the parking
brake. Why? Press the electric parking brake switch with the brake pedal
depressed.
Depressing the accelerator
pedal does not release the
parking brake
automatically. Why? ●
Fasten the driver’s seat belt. ●
Check if the transmission is in ( P
or ( N
. If so, select any other
position.18 CLARITY PHEV CSS-31TRW6000.book 38 ページ ２０１７年８月３１日　木曜日　午後２時 ４９分

90 uu Indicators u
Instrument Panel Indicator Name On/Blinking Explanation Message
READY Indicator ●
Comes on when the vehicle is
ready to drive. ●
May go off if the POWER SYSTEM or
transmission system indicator comes on. 2 Turning on the Power P. 376
Malfunction
Indicator Lamp ●
Comes on when you set the power
mode to ON, and goes off either
when the power system is on or
after several seconds if the vehicle
did not start. If “readiness codes”
have not been set, it blinks five
times before it goes off. ●
Comes on if there is a problem
with the emissions control system. ●
Blinks when a misfire in the
engine's cylinders is detected. ●
Readiness codes are part of the on board
diagnostics for the emissions control
systems. 2 Testing of Readiness Codes P. 572 ●
Comes on while driving - Have your
vehicle checked by an authorized Honda
Clarity Plug-In Hybrid dealer. ●
Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the power system for 10
minutes or more, and wait for the engine
to cool down. Then, t ake the vehicle to an
authorized Honda Clarity Plug-In Hybrid
dealer. 2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 547
12-Volt Battery
Charging System
Indicator ●
Comes on when you set the power
mode to ON, and goes off when
the power system is on. ●
Comes on when the 12-volt
battery is not charging. ●
Comes on while driving - Turn off the
climate control system and rear defogger
in order to reduce electricity
consumption. 2 If the 12-Volt Battery Charging
System Indicator Comes On P. 54618 CLARITY PHEV CSS-31TRW6000.book 90 ページ ２０１７年８月３１日　木曜日　午後２時 ４９分

92 uu Indicators u
Instrument Panel Indicator Name On/Blinking Explanation Message
Transmission
System Indicator ●
All the gear positions may light for
several seconds, and go off. ●
When all the gear positions illuminate,
immediately stop your vehicle in a safe
place. ●
Indicators go off if there is no problem.
However, even if they go off, take your
vehicle to an authorized Honda Clarity
Plug-In Hybrid dealer for inspection. ●
The indicated current gear
selection blinks if there is a
problem with the transmission
system. ●
Avoid sudden start and acceleration, and
stop in a safe place immediately. ●
Have your vehicle checked by an
authorized Honda Clarity Plug-In Hybrid
dealer. ●
The indicated current gear
selection or all the gear positions
blink if you cannot select ( P
due
to a transmission system failure. ●
The engine can be activated as a
temporary measure. 2 If the Transmission System Indicator
Blinks along with the Warning
Message P. 552 ●
Set the parking brake when parking. ●
Have your vehicle checked by an
authorized Honda Clarity Plug-In Hybrid
dealer immediately.18 CLARITY PHEV CSS-31TRW6000.book 92 ページ ２０１７年８月３１日　木曜日　午後２時 ４９分

111uu Indicators u Driver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
Message Condition Explanation●
Appears when you set the power mode to ON
without fastening the driver’s seat belt. ●
Appears if the gear positi on has been automatically
changed to ( P
and the driver attempts to take the
vehicle out of ( P
but does not have his or her
seatbelt fastened. ●
Fasten the seat belt properly before you start to drive. 2 Shift Operation P. 384●
Appears when you try to change the gear position
without depressing the brake pedal while the
transmission is in ( P
or ( N
. ●
Depress the brake pedal, then select a shift button.●
Appears when you try to change the gear position
without releasing your foot off the accelerator pedal
while the transmission is in ( P
or ( N
. ●
Release your foot off the acce lerator pedal, then select
a shift button.●
Appears when the transmission system temperature
is too high. ●
Park in a safe place, and a llow the system to cool down
sufficiently.●
Appears when you depress the accelerator pedal
while the transmission is in ( N
. ●
Release the accelerator pedal. ●
Depress the brake pedal, then select a shift button to
start driving.18 CLARITY PHEV CSS-31TRW6000.book 111 ページ ２０１７年８月３１日　木曜日　午後２時４９分

112 uu Indicators u Driver Information Interface Wa rning and Information Messages
Instrument Panel Message Condition Explanation●
Appears when the parking button is pressed while
the vehicle is moving. ●
Appears if you change the gear position to ( R
while
the vehicle is moving forward, or to ( D
while the
vehicle is reversing. ●
Make sure that the vehicle comes to a stop before
operating the select button.●
Appears if there is a proble m with the electric system. ●
Appears when you set the power mode to OFF while
driving. ●
Immediately stop in a safe place and set the parking
brake. ●
Resume driving if the message disappears. ●
If there is a problem with the transmission system, the
transmission system indicator comes on. 2 Transmission System Indicator P. 92●
Appears when the vehicle is stopped with the driver’s
seat belt unfastened and th ere is a chance that the
vehicle may roll unintentionally. ●
Press the ( P
button before releasing the brake pedal
when idling, parking, or exiting the vehicle. 2 Shift Operation P. 384●
Appears for a few seconds if you have not pressed
the ( N
button long enough to initiate Neutral-Hold
mode. 2 If you want to keep the transmission in
( N
position [car wash mode] P. 386●
Appears when you press and hold ( N
button for
more than 2 seconds. ●
Disappears when you set the g ear position to other than
( N
. 2 If you want to keep the transmission in
( N
position [car wash mode] P. 38618 CLARITY PHEV CSS-31TRW6000.book 112 ページ ２０１７年８月３１日　木曜日　午後２時４９分

131uu Gauges and Driver Information Interface u Driver Information Interface
Continued
Instrument Panel
■ Drive Cycle Score/Lifetime Points
Appear for a few seconds when you set the power mode to VEHICLE OFF (LOCK).
Each has three stages. Depending on your driving style, the leaf icon(s) and the
gauge increase or decrease to indicate that you have reached a different stage of
fuel economy.
■ Resetting the Drive Cycle Score
1. Make sure the transmission is in ( P
. Turn the power mode to ON.
2. If ECON mode is on, press the ECON button to turn it off.
3. Turn the power mode to VEHICLE OFF (LOCK).
4. Turn the power mode to ON again.
u Make sure to complete steps fro m 4 through 6 within 30 seconds.
5. Depress the brake pedal twice.
u The color of the ambient meter wi ll change from white to green.
u When the Fuel Efficiency Backlight setting on the audi o/information display
is off, the color stays white.
6. Press the ECON button twice.
u The color of the ambient mete r will turn to monochrome.
7. Turn the power mode to VEHICLE OFF (LOCK). Advancing to
2nd Stage Advancing to
3rd Stage
Receding to
2nd Stage Receding to
3rd StageLifetime PointsDrive Cycle Score18 CLARITY PHEV CSS-31TRW6000.book 131 ページ ２０１７年８月３１日　木曜日　午後２時４９分

159uu Operating the Switches Around the Steering Wheel u POWER Button
Continued
Controls
If you leave the vehicle for 30 to 60 minutes with the transmission in ( P
and the
power mode in ACCESSORY, the vehicle au tomatically goes into the mode to
VEHICLE OFF (LOCK) to avoid draining the 12-volt battery.
If you open the driver’s door when the power mode is set to ACCESSORY, a warning
beep sounds.
■ Automatic Power Off
■ Power Mode Reminder 18 CLARITY PHEV CSS-31TRW6000.book 159 ページ ２０１７年８月３１日　木曜日　午後２時４９分

171uu Operating the Switches Around the Steering Wheel u Driving Position Memory System *
Controls
1. Set the power mode to ON. Adjust the
driver’s seat to the desired position.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press and hold memory button ( 1
or ( 2

within five seconds of pressing the SET
button.
u Once the seat position has been
memorized, the indicator light on the
button you pressed stays on and you will
hear the double-beep.
1. Put the transmission into ( P
.
2. Apply the parking brake.
3. Press a memory button ( ( 1
or ( 2
).
u You will hear the beeper, and the
indicator light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.■ Storing a Position in Memory 1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat position before the double-
beep.
• You set the power mode to any position except
ON.Memory Button 1
Memory Button 2
SET Button
■ Recalling the Stored Position 1 Recalling the Stored Position
The seat will st op moving if you:
• Press the SET button or memory button ( 1
or ( 2
.
• Adjust the seat position.
• Put the transmission into a position other than ( P
.Memory Buttons18 CLARITY PHEV CSS-31TRW6000.book 171 ページ ２０１７年８月３１日　木曜日　午後２時４９分