washer fluid HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual

HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual CR-V 1997 RD1-RD3 / 1.G HONDA HONDA https://www.carmanualsonline.info/img/13/5778/w960_5778-0.png HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual

Page 103 of 1395

HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual 
22. Remove the radiator caP.
!@ use care when removing the radiatol
cap to avoid scalding by hot coolani or steam.
23. Raise the hoist to full height
24. Remove the front tires/wheels.
25. Remove the

Page 442 of 1395

HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual 
MaintenanceBack-up Light Switch
Transmission Fluid
NOTE: Check the fluid with the engine OFF and vehicle
on level ground.
1. Remove the filler plug. then check the level and
condition of the fluid.
F

Page 444 of 1395

HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual 
Removal
!@@ Make sure the lifts, i8cks. and safety stands
are placed properly {see section 1}.
1. Raise the front of the vehicle, and support it with
safety stands (see section 1).
2. Set the parking

Page 447 of 1395

HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual 
Transmission Assembly
Removal (contdl
6. Remove the cotter pins,
washers, plastic washers.
cable from the levers.
then remove the steel
shift cable, and select
1.
8.
Remove the cable bracket from th

Page 514 of 1395

HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual 
18.
19.
Refill the transmission fluid (see page 13-3)
Install the four upper transmission mounting bolts.
12 x 1.25 mm6it N.m 16.5 kgf m,il7 lbf.ftl
20. Connect the vehicle speed sensor (VSS) connect

Page 677 of 1395

HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual 
Pressure Testing
Changing
NOTE: Keep all foreign particles out of the transmis-
sion.
1. Bring the transmission up to operating temperature
(the radiator fan comes on) by driving the vehicle.
Park th

Page 681 of 1395

HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual 
Transfer Assembly
Removal
@ Make sure the lifts, iacks, and safety
stands are placed properly (see section 11.
1. Raise the front of the vehicle, and make sure it is
supported securely.
2. Set the pa

Page 686 of 1395

HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual 
Transmission
Removal (contd)
8. Disconnect the mainshaft sp€ed sensor, the shift
control solenoid valve, and the linear solenoid con-
necrors,
Remove the drain plug. and drain the automatic
transm

Page 803 of 1395

HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual 
Rear Differential AssemblY
Troubleshooting
Most problems in the unit are to be diagnosed by identifying noises from the gears or bearngs
care should be taken during diagnosis not to confuse differe

Page 804 of 1395

HONDA CR-V 1997 RD1-RD3 / 1.G Workshop Manual 
Maintenance
Differential Fluid
!@ Make sure lifts are placed properly lseesection 1).
1. With the vehicle on level ground, inspect differential
fluid with engine OFF.
2. Remove the oil filler plug, t
Page:   1-10 11-20 next >