engine HONDA CR-Z 2011 1.G Owner's Manual

83
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Multi-Information Display
The multi-information display shows the odometer, trip meter, outside temperature, and other fuel economy information.It also displays important messages such as warnings and other helpful information.Switching the Display

■
Press the button or the SEL/RESET button to change the display.
Eco Guide feedback with Eco Drive Bar
OFF
HFL *
Customizable Setting Entry Engine Oil Life Power Flow
MonitorAverage Vehicle SpeedElapsed Time
Average Fuel Economy Records
Average Fuel Economy A
Range
SEL/RESET Button
(Information) Button Shown when
Bluetooth®

HandsFreeLink ®
is activated.
* Not available on all models
Main MenuTable of Contents

85
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Eco Assist Scoring (Real-Time Score)/Eco Guide Feedback
■

■ Real-Time Score
The Eco assist scoring system is a point system you can use to monitor your driving style and its impact on fuel economy. Points are represented by leaf icons on the multi-information display. Leaves are:
Accumulated when your driving style is fuel
•
efficient.Deducted when your style is not fuel
•
efficient.
Reset the System
■
To clear all leaves and lifetime points, complete the following steps within 30 seconds, and do not run the engine.
Automatic transmission (CVT): The shift lever must be in
1.
P.
Manual transmission: The parking brake must be set. Turn the ignition switch to ON
2.
II.
Make sure the NORMAL mode is selected.
3.
Depress the brake pedal twice.
4.
The ambient meter color changes from blue to green.
When the “meter color change” setting on the multi-information display is
off, the color stays in blue.
Press the ECON mode button.
5.
Press the NORMAL mode button.
6.
The ambient meter color turns off.
Turn the ignition switch to LOCK
7.
0.
1st Stage
Leaf Icon
2nd Stage 3rd Stage
Reset the System
If the ECON mode is on in step 2, press the NORMAL mode button. Turn the ignition switch to LOCK
, then go to step 1.
continued
Main MenuTable of Contents

88
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Power Flow Monitor
■
Displays engine and electric motor power flow – whether the system is assisting the engine or charging the battery.
Power Flow Monitor
The displayed power low may not correspond to the ASST/CHRG indicators directly.
Electric Motor Assist Indicator (ASST) P. 8 2 Battery Charge in Progress (CHRG) P. 8 2
Operating
Not operating
Engine Operation IconPower Flow
Power is supplied with the engine and the electric motor is assisting the engine.
The electric motor is charging the IMA
battery.
Power is supplied with only the engine.
Power is supplied with only the engine and the electric motor is charging the
IMA battery.
Main MenuTable of Contents

89
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Engine Oil Life
■
Shows the remaining oil life and Maintenance Minder ™
.
Maintenance Minder ™
P.241
Bluetooth

■®
HandsFreeLink ®
*
Shows your paired cell phone’s information.
Bluetooth ®
HandsFreeLink ®
P.173
* Not available on all models
Main MenuTable of Contents

99
Controls
Locking and Unlocking the Doors
Key Types and Functions
This vehicle comes with the following keys:Keys

■
Use the key to start and stop the engine, and to lock and unlock all the doors and hatch. You can also use the remote transmitter to lock and unlock the doors and hatch.
Key Number Tag

■
Contains a number that you will need if you purchase a replacement key.
Key Types and Functions
All of the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.
Immobilizer System P.1 0 5
The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics: Do not leave the keys in direct sunlight, or

•
in locations with high temperature or high humidity.Do not drop the keys or set heavy objects on

•
them.Keep the keys away from liquids.

•
Do not take the keys apart except for replacing

•
the battery.
If the circuit in the keys are damaged, the engine may not start, and the remote transmitter may not work.If the keys do not work properly, have them inspected by a dealer.
Key Number Tag
Keep the key number tag separate from the key in a safe place outside of your vehicle.If you wish to purchase an additional key, contact your dealer. If you lose your key and you cannot start the engine, contact your dealer.
Key with Remote Transmitter
Main MenuTable of Contents

105
Controls
Security System
Immobilizer System
Immobilizer System
NOTICE Leaving the ignition key in the vehicle can result in theft or accidental movement of the vehicle.Always take the ignition key with you whenever you leave the vehicle unattended. Do not alter the system or add other devices to it. Doing so may damage the system and make your vehicle inoperable.
The immobilizer system prevents a key that has not been pre-registered from starting the engine. Each key contains electronic transmitters that use electronic signals to verify the key. Pay attention to the following when inserting the key to the ignition switch.Do not allow objects that emit strong radio waves near the ignition switch.
•
Make sure the key is not covered by or touching a metal object.
•
Do not bring a key from another vehicle’s immobilizer system near the ignition
•
switch.
Security Alarm System The security alarm system activates when the doors, hatch, or hood are opened without the key, or remote transmitter. It also activates if you turn the ignition switch to ON
II after locking the doors and the hatch with the remote transmitter.
When the Security Alarm System Activates
■
The horn beeps intermittently, and all of the exterior lights flash.
To Deactivate the Security Alarm System
■
Unlock the vehicle using the key, or remote transmitter. The system, along with the horn and flashing lights, are deactivated.
Security Alarm System
The security alarm continues for a maximum of two minutes until the security alarm system deactivates.
continued
Main MenuTable of Contents

109
Controls
Operating the Switches Around the Steering Wheel
Ignition Switch
Ignition Switch
Manual transmission models Automatic transmission (CVT) models
You cannot take the key out unless the shift lever is
in .
On all models If you open the driver's door when the key is in LOCK or ACCESSORY , a warning buzzer will
sound to remind you to take the key out. If the key won't turn from LOCK
to ACCESSORY , turn the key while moving the steering wheel
left and right. The steering wheel will unlock, allowing the key to turn.
WARNING
Removing the key from the ignition switch locks the steering. If you do this while the vehicle is in motion, you can lose control of the vehicle. Only remove the key from the ignition switch when parked.
LO CK: In se rt and re move the key in this position.
AC CESSOR Y: Op erate the audio system and
other acce ssories in this position.
ON : Th is is the position when driving.
ST AR T: Th is position is for starting the engine .
Th e sw itch returns to ON when you let go of the
key.
Main MenuTable of Contents

110
Controls
Operating the Switches Around the Steering Wheel Turn Signals Light Switches
Turn Signals
The turn signals can be used when the ignition switch is in ON
II.
Light Switches Manual Operation

■
Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch.
Low Beams
■
Rotate the light switch to
.
High Beams
■
Push the lever forward until you hear a click. Pull the lever back to return to low beams.
Flashing the High Beams
■
Pull the lever back and release it.
Right Turn
Left Turn
Light Switches
If you remove the key with the lights on, a lights on
reminder chime will sound. When the lights are on, the lights on indicator in the instrument panel will be on.
Indicators P. 6 8
Repeatedly turning the headlights on and off reduces the life of the HID headlight bulbs.If you sense that the level of the headlights is abnormal, have the vehicle inspected by a dealer. Do not leave the lights on when the engine is off because it will cause the battery to discharge.
H igh Beam s
Lo w B eam s
Flashing

the high beam s
Turns on parking, side marke r,
tail, and license plate lights Tu rns on headlights, parking,
side marker, tail, and license plate lights
Main MenuTable of Contents

116
Controls
Operating the Switches Around the Steering Wheel Rear Defogger/Heated Door Mirror Button
Rear Defogger/Heated Door Mirror* Button
Rear Defogger/Heated Door Mirror Button
NOTICE When cleaning the inside of the rear window, be careful not to damage the heating wires.It is critical to wipe the window from side to side along the defogger heating wires. This system consumes a lot of power, so turn it off when the window has been defogged.Also, do not use the system for a long period when the engine is idling. This may weaken the 12 volt battery, making it dificult to start the engine.
Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the ignition switch is in ON II.
The rear defogger and heated door mirrors automatically switch off after 10–30 minutes depending on the outside temperature. However, if the outside temperature is 32°F (0°C) or below, they do not automatically switch off.
* Not available on all models
Main MenuTable of Contents

122
Controls
Adjusting the Seats Adjusting the Seat Position
Maintain a Proper Sitting Position
■
After all occupants have adjusted their seats, and put on their seat belts, it is very important that they continue to sit upright, well back in their seats, with their feet on the floor, until the vehicle is safely parked and the engine is off. Sitting improperly can increase the chance of injury during a crash. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased. In addition, an occupant who is out of position in the seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag.
Active Head Restraints

■
The driver’s and passenger’s seats have active head restraints. In a rear impact, an occupant properly secured by a seat belt will be pushed against the seat-back and the head restraint will move forward. This reduces the distance between the restraint and the occupant’s head. It also helps protect the occupants against the likelihood of whiplash and injuries to the neck and upper spine.
Maintain a Proper Sitting Position
WARNING
Sitting improperly or out of position can result in serious injury or death in a crash. Always sit upright, well back in the seat, with your feet on the floor.
Active Head Restraints
In order for the active head restraint to operate properly: Do not hang any items on the head restraints, or

•
from the restraint legs.Do not place any objects between an occupant

•
and the seat-back.
After a collision, the activated restraint should
return to its normal position. If the restraints do not
return to their normal position, or in the event of a severe collision, have the vehicle inspected by a dealer.
Main MenuTable of Contents