fuse chart HONDA CR-Z 2011 1.G Owners Manual

307
Handling the Unexpected
Fuses Inspecting and Changing Fuses
Inspecting and Changing Fuses1. Turn the ignition switch to LOCK
0. Turn
headlights and all accessories off. Check the fuses in the engine
2.
compartment.
If the fuse is blown, have it replaced by a dealer.
3. Inspect the small fuses in the vehicle interior.
If there is a burned out fuse, remove it
with the fuse puller and replace it with a new one.
Fuse
Blown
Inspecting and Changing Fuses
NOTICE Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system. If you do not have a replacement fuse with the proper rating for the circuit, install one with a lower rating. Replace fuse with a spare fuse of the same speciied amperage.Conirm the speciied amperage using the charts on P.304 to P.306. There is a fuse puller on the interior fuse box.
Fuse Puller
Main MenuTable of Contents