reset HONDA CR-Z 2012 1.G Owners Manual

3
Quick Reference Guide
❙Wipers/Washers (P 113)
❙Paddle Shifter (Shift up) *
(P 206)
❙Brightness Control (P 115)
❙Headlights/Turn Signals (P 110)
❙Fog Lights*
(P 112)
❙Remote Audio Control Buttons (P 140)
❙Paddle Shifter (Shift down)*
(P206)
❙Cruise Control Buttons (P 212)
❙SEL/RESET Button (P 83)
❙ / (Information) Button (P 83)4
❙Horn (Press an area around .)
❙Bluetooth® HandsFreeLink ® System Voice Control Buttons *
(P 173)
❙Navigation System Voice Control Buttons *

() See Navigation System Manual
* Not available on all models

16
Quick Reference Guide
Hatch (P104)
● With the doors unlocked, press the hatch
release button on the hatch to open it.
Door Mirrors (P118)
● With the ignition switch in ON
(w, move
the selector switch to L or R.
● Push the appropriate edge of the
adjustment switch to adjust the mirror.
Selector Switch
Adjustment Switch
Power Windows (P107)
● With the ignition switch in ON
(w, open
and close the power windows.
● If the power window lock button is in the
OFF position, the passenger's window can
be opened and closed with its own switch.
● If the power window lock button is in the
ON position, the passenger's window
switch is disabled.
Power Window Lock Button
Window Switch
Clock (P98)
a Press the FM/AM button until you hear
a beep. The displayed time begins flashing.
b Press the
(1 (Hour) or (2 (Minute)
button to set the time. Press the
(3
(Reset) button to set the time to the nearest hour.
c Press the FM/AM button again to set the time.
The navigation system receives signals from
GPS satellites, updating the clock
automatically.
Models without navigation system
Models with navigation system

18
Quick Reference Guide
Features (P135)
Audio System (P136)
Models without navigation system
Button
TITLE Button
FM/AM Button
(Power) Button
CD Button AUX Button
CD Slot
(CD Eject) Button
SCAN Button
(Sound) Button
VOL/SELECT
(Volume/Select) Knob
SEEK ButtonPreset Buttons
Button
SEEK Button
Auxiliary Input Jack Audio Display
RDM/A.SEL (Random/Auto Select) Button
RPT (Repeat) Button

19
Quick Reference Guide
Audio System (P136)
For navigation system operation () See Navigation System Manual
Models with navigation system
VOL/PWR (Volume/Power) Knob FM1 Icon
FM2 Icon AM Icon
OPEN Button
AM/FM Button CD/AUX Button
AUDIO Button
SCAN Button
TUNE Bar AUTO SEL
(Auto Select) Icon
Sound Icon
Background Icon
Preset Buttons
CD SlotPC Card Slot
● Audio Remote Controls (P140)
● VOL (volume) Button
Press and release / to adjust the
volume up/down.
● MODE ButtonPress and release to ch ange the audio
mode: FM1/FM2/AM/CD/PC Card/AUX.
● CH (channel) Button
Radio: Press and release to change the
preset station.
Press and hold to select the next or
previous strong station.
CD/PC Card/USB device:
Press and release to skip to the
beginning of the next song or
return to the beginning of the
current song.
Press and hold to change a folder.
MODE Button
VOL Button
CH Button
34

83
uuGauges and Multi-Information DisplayuMulti-Information Display
Continued
Instrument Panel
Multi-Information Display
The multi-information display shows the odometer, trip meter, outside temperature,
and other gauges.
It also displays important messages such as warnings and other helpful information.
Press the / (information) button or the SEL/RESET button to change the
display.
■Switching the Display
4
/
(Information)
Button4SEL/RESET
Button
Eco Guide feedback
with Eco Drive Bar Average Fuel
Economy
RecordsAverage Fuel
Economy A
Range
Elapsed Time
Average Vehicle
Speed
Power Flow Monitor
Engine Oil Life
Customizable Setting Entry HFL
*
OFF
Shown when Bluetooth®
HandsFreeLink ® is activated.
* Not available on all models

uuGauges and Multi-Information DisplayuMulti-Information Display
84
Instrument Panel
Shows the total number of miles or kilometers that your vehicle has accumulated.
Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure 2 separate trips. ■ Resetting a trip meter
To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip
meter is reset to “0.0”.
■Odometer
■Trip Meter
Odometer Outside temperature Trip A Trip B
1Trip Meter
Switch between trip meter A and trip meter B by pressing the SEL/RESET button.

Continued85
uuGauges and Multi-Information DisplayuMulti-Information Display
Instrument Panel
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada). ■Adjusting the ou tside temperature display
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading
seems incorrect. 2 Customized Features P. 90
Shows the estimated distance you can travel on the remaining fuel. This distance is
estimated from the fuel economy of your trips in the past.
Shows the time during one drive cycle.
Shows the average speed in mph or km/h since the last time Trip A was reset.
■Outside Temperature
■Range
■Elapsed Time
■Average Speed
1Outside Temperature
The temperature sensor is in the front bumper.Road
heat and exhaust from another vehicle can affect the
temperature reading when your vehicle speed is less
than 19 mph (30 km/h).
It may take several mi nutes for the display to be
updated after the temperature reading has stabilized.
Use the multi-information display’s customized features to corre ct the temperature.
1Elapsed Time
You can change the elapsed time reset criteria.
2 Customized Features P. 90

uuGauges and Multi-Information DisplayuMulti-Information Display
86
Instrument Panel
■ Real-Time score
The Eco assist scoring system is a point system
you can use to monitor your driving style and
its impact on fuel economy. Points are
represented by leaf icons on the multi-
information display. Leaves are:• Accumulated when your driving style is fuel
efficient.
• Deducted when your style is not fuel efficient.
■ Reset the system
To clear all leaves and lifetime points, complete the following steps within 30 seconds, and do not run the engine. 1. The shift lever must be in
(P .
The parking brake must be set.
2. Turn the ignition switch to ON
(w .
3. Make sure the NORMAL mode is selected.
4. Depress the brake pedal twice.
uThe ambient meter color changes from blue to green.
uWhen the METER COLOR CHANGE setting on the multi-information display is
off, the color stays in blue.
5. Press the ECON mode button.
6. Press the NORMAL mode button.
uThe ambient meter color turns off.
7. Turn the ignition switch to LOCK
(0 .
■Eco Assist Scoring (Real-Time Score )/Eco Guide Feedback
Leaf
ICON1st Stage 2nd Stage 3rd Stage
1Reset the system
If the ECON mode is on in step 2, press the NORMAL
mode button. Turn the ignition switch to LOCK
(0
,
then go to step 1.
Automatic transmiss ion (CVT) models
Manual transmission models

uuGauges and Multi-Information DisplayuMulti-Information Display
88
Instrument Panel
Shows the average fuel economy for the last
three driving cycles (1-3), and the current
driving cycle (0) in mpg or l/100 km.
Each time you turn the ignition switch to ON
(w , the display is updated, and the oldest
record is deleted.
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.
The display is updated at set intervals. When a trip meter is reset, its average fuel
economy is also reset at the same time.
Shows the remaining oil life and Maintenance Minder ™
.
2 Maintenance Minder

uuGauges and Multi-Information DisplayuMulti-Information Display
90
Instrument Panel
Use the multi-information display to customize certain features. ■ How to customize
Select the CUSTOMIZE SETTING screen by pressing the / button while the
ignition switch is in ON
(w , the vehicle is at a complete stop, and the shift lever is in
(P (CVT), and the parking brake is set (manual transmission). Press the SEL/RESET
button to select CHG SETTING screen.
■Customized Features1Customized Features
To customize other features, press the SEL/RESET
button on the CHG SETTING screen, then press the
/ button.
2 List of customizable options P. 92
2 Example for customizing settings P. 94
When you customize settings:
Shift to
(P .
Set the parking brake.
4
Automatic transmission (CVT) models
Manual transmission models
4
/ Button
Press to change the customize menus and items.4
SEL/RESET Button
Press to set your selection.