width HONDA CR-Z 2016 1.G Owners Manual
[x] Cancel search | Manufacturer: HONDA, Model Year: 2016, Model line: CR-Z, Model: HONDA CR-Z 2016 1.GPages: 409, PDF Size: 19.68 MB
Page 333 of 409

332
uuChecking and Maintaining Tires uTire and Loading Information Label
Maintenance
Tire and Loading Information Label
The label attached to the driver’s doorj amb provides necessary tire and loading 
information.
Tire Labeling
The tires that came on your vehicle have a 
number of markings. Those you should be 
aware of are described below.
Whenever tires are replaced, they should be replaced with tires of the same size.
1 Tire and Loading Information Label
The tire and loading informat ion label attached to the 
driver’s doorjamb contains:
aThe number of people your vehicle can carry.
bThe total weight your vehicle can carry. Do not 
exceed this weight.
cThe original tire sizes for front, rear, and spare.
dThe proper cold tire pressure for front, rear, and 
spare.
Label 
Example
Example Tire Size
Tire 
Identification 
Number (TIN)
Maximum 
Tire Load
Maximum 
Tire Pressure
Tire Size
■Tire Size
1 Tire Size
Following is an example  of tire size with an 
explanation of what  each component means.
P195/55 R16 86V
P: Vehicle type (P indi cates passenger vehicle).
195: Tire width in millimeters.
55: Aspect ratio (the tire’s section height as a 
percentage of its width).
R: Tire construction code (R indicates radial).
16: Rim diameter in inches.
86: Load index (a numerical  code associated with the 
maximum load the tire can carry).
V: Speed symbol (an alphab etical code indicating the 
maximum speed rating).
16 CR-Z-31SZT6500.book  332 ページ  2015年9月11日 金曜日 午前11時47分 
Page 335 of 409

334
uuChecking and Maintaining Tires uDOT Tire Quality Grading (U.S. Vehicles)
Maintenance
DOT Tire Quality Grading (U.S. Vehicles)
The tires on your vehicle meet all U.S. Federal Safety 
Requirements. All tires are also  graded for treadwear, traction, 
and temperature performance a ccording to Department of 
Transportation (DOT) standards. The following explains these 
gradings.
Quality grades can be found where  applicable on the tire sidewall 
between tread shoulder an d maximum section width.
The treadwear grade is a comparative rating based on the wear 
rate of the tire when tested un der controlled conditions on a 
specified government test course. For example, a tire graded 150 
would wear one and one-half (1 1/2) times as well on the 
government course as a tire graded 100. The relative performance 
of tires depends upon the actual conditions of their use, however, 
and may depart significantly from  the norm due to variations in 
driving habits, service practices and differences in road 
characteristics and climate.
■Uniform Tire Quality Grading
■Treadwear
1 Uniform Tire Quality Grading
For example:
Treadwear 200
Traction AA
Temperature A
All passenger car tires must conform 
to Federal Safety Requirements in 
addition to these grades.
16 CR-Z-31SZT6500.book  334 ページ  2015年9月11日 金曜日 午前11時47分