check engine HONDA CROSSTOUR 2013 1.G Remote Engine Starter Guide

Honda Remote Engine Starter: Quick Start GuideNote: This guide is only use to help you get acquainted to your new Honda Remote Engine Starter. You should always check
the User’s Information Manual for more operating information and safety features.
Check
ReminderSecurity Alarm TriggerAuto A/C Control Function
Setting Change Reminder
Battery Status
Remaining
Idling Time
Door Lock
Remaining
Idling Time
Start
Button Stop
Button Command
Button Door Unlock Engine Run
Major Functions of Buttons
: Indicates condition of the vehicle/remote control
starter.: Use to start/stop the engine, to extend the idling time,
to check the vehicle condition, and to change the
automatic defrost function.: Use to start the engine and to extend the idling time.: Use to stop the engine.
Functions:
: The doors are locked.: The doors are unlocked.: The engine can be started with the transmitter.: The engine cannot be started with the transmitter.: Any of the requirements to start are not met.: Battery (Lithium battery (2) CR2032) replacement is
recommended.: The remaining idling time displayed in bars: The remaining idling time displayed in minute: The security system alarm has been triggered.
(Only vehicles equipped with the standard security
system or the Honda accessory security system): Memory status

COMMAND
BUTTONUsing the Remote Engine StarterNote: Remote Control Range (200 ft) depending on where you are, you may experience reduced range reception. See the
User’s Information Manual for more details.
Checking Vehicle StatusYou can check the vehicle condition on the transmitter
display by performing the following operation:
Push the command button 2 times on the transmitter for
1 second or less.
NOTE: This function does not work when the ignition switch
is in the ON (II) position.