diagram HONDA FIT 2011 2.G Owners Manual

Checking and Replacing Fuses
If something electrical in your
vehicle stops working, check for a
blown fuse first. Determine from the
chart on pages 311 and 312, or the
diagram on the fuse label, which fuse
or fuses control that device. Check
those fuses first, but check all the
fuses before deciding that a blown
fuse is the cause. Replace any blown
fuses, and check if the device works.
1. Turn the ignition switch to theLOCK (0) position. Make sure the
headlights and all other
accessories are off.
2. On the under-hood fuse box, remove the cover from the fuse
box. On the interior fuse box, pull
the fuse lid toward you.
3. Check each of the large fuses inthe under-hood fuse box and the
interior fuse box by looking
through the top at the wire inside.4. Check all smaller fuses in theinterior fuse box by pulling out
each one with the fuse puller
provided in the interior fuse box.
FUSE
BLOWN
FUSE PULLER
CONTINUED
Fuses
309
Taking Care of the Unexpected
Main MenuTable of Contents

The diagrams in this section give you
the dimensions and capacities of
your vehicle and the locations of the
identification numbers. It also
includes information you should
know about your vehicle's tires and
emissions control systems.Identification Numbers
...............318
Specifications .............................. 320
DOT Tire Quality Grading (U.S. Vehicles) ............................. 323
Uniform Tire Quality Grading ............................... 323
Treadwear ............................... 323
Traction .................................. 323
Temperature ........................... 324
Tire Labeling .............................. 325
Tire Pressure Monitoring System (TPMS) Required Federal
Explanation ......................... 326
Emissions Controls .....................328
The Clean Air Act ....................328
Crankcase Emissions Control System ................................ 328
Evaporative Emissions Control
System ................................ 328
Onboard Refueling Vapor
Recovery ............................. 328
Exhaust Emissions Controls .............................. 329
Replacement Parts ..................
329Three Way Catalytic
Converter ................................
330
Emissions Testing .......................331
Technical Information
317
Technical Information
Main MenuTable of Contents